[1] [1] ZHOU Y C, ZHAN Y J, ZHU M T, et al. A review of the effects of raw material compositions and steam curing regimes on the performance and microstructure of precast concrete[J]. Materials, 2022, 15(8): 2859.

[2] [2] NAAS A, TAHA-HOCINE D, SALIM G, et al. Combined effect of powdered dune sand and steam-curing using solar energy on concrete characteristics[J]. Construction and Building Materials, 2022, 322: 126474.

[6] [6] YAO B, REN G S, HUANG J B, et al. Influence of self-ignition coal gangue on properties of foam concrete with steam curing[J]. Case Studies in Construction Materials, 2022, 17: e01316.

[7] [7] WANG P G, FU H, GUO T F, et al. Volume deformation of steam-cured concrete with fly ash during and after steam curing[J]. Construction and Building Materials, 2021, 306: 124854.

[8] [8] LOU B X, MA F H. Crack extension resistance of steam-cured concrete under different curing temperature conditions[J]. Theoretical and Applied Fracture Mechanics, 2022, 119: 103331.

[10] [10] LIU B J, JIANG J Y, SHEN S, et al. Effects of curing methods of concrete after steam curing on mechanical strength and permeability[J]. Construction and Building Materials, 2020, 256: 119441.

[11] [11] CABRERA-LUNA K, MALDONADO-BANDALA E E, NIEVES-MENDOZA D, et al. Supersulfated cements based on pumice with quicklime, anhydrite and hemihydrate: characterization and environmental impact[J]. Cement and Concrete Composites, 2021, 124: 104236.

[12] [12] HANSEN S, SADEGHIAN P. Recycled gypsum powder from waste drywalls combined with fly ash for partial cement replacement in concrete[J]. Journal of Cleaner Production, 2020, 274: 122785.

[13] [13] ZHANG G, LI G X. Effects of mineral admixtures and additional gypsum on the expansion performance of sulphoaluminate expansive agent at simulation of mass concrete environment[J]. Construction and Building Materials, 2016, 113: 970-978.

[14] [14] WANG Q, SUN S K, YAO G, et al. Preparation and characterization of an alkali-activated cementitious material with blast-furnace slag, soda sludge, and industrial gypsum[J]. Construction and Building Materials, 2022, 340: 127735.

[15] [15] ZENG L, ZHU J Y, ZHAO Y, et al. Pore structure characteristics and permeability analysis of natural anhydrite with various water/anhydrite ratios based on mercury intrusion porosimetry[J]. Construction and Building Materials, 2023, 398: 132422.

[16] [16] KALKAN ? O, GüNDüZ L. The influence of anhydrite III as cement replacement material in production of lightweight masonry blocks for unreinforced non-load bearing walls[J]. Journal of Sustainable Construction Materials and Technologies, 2022, 7(4): 322-338.

[17] [17] HOU C, JIN X G, HE J, et al. Experimental studies on the pore structure and mechanical properties of anhydrite rock under freeze-thaw cycles[J]. Journal of Rock Mechanics and Geotechnical Engineering, 2022, 14(3): 781-797.

[18] [18] ZHANG Z W, QIAN J S. Effect of protogenetic anhydrite on the hydration of cement under different curing temperature[J]. Construction and Building Materials, 2017, 142: 417-422.

[19] [19] ZAHABIZADEH B, EDALAT-BEHBAHANI A, GRANJA J, et al. A new test setup for measuring early age coefficient of thermal expansion of concrete[J]. Cement and Concrete Composites, 2019, 98: 14-28.

[20] [20] YANG Z Z, YE H S, YUAN Q, et al. Factors influencing the hydration, dimensional stability, and strength development of the OPC-CSA-anhydrite ternary system[J]. Materials, 2021, 14(22): 7001.

[21] [21] JEN G, SKALAMPRINOS S, WHITTAKER M, et al. The impact of intrinsic anhydrite in an experimental calcium sulfoaluminate cement from a novel, carbon-minimized production process[J]. Materials and Structures, 2017, 50(2): 144.

[22] [22] ESCALANTE-GARCIA J I, MARTNEZ-AGUILAR O A, GOMEZ-ZAMORANO L Y. Calcium sulphate anhydrite based composite binders: effect of Portland cement and four pozzolans on the hydration and strength[J]. Cement and Concrete Composites, 2017, 82: 227-233.

[25] [25] PAUL A, RASHIDI M, KIM J Y, et al. The impact of sulfate- and sulfide-bearing sand on delayed ettringite formation[J]. Cement and Concrete Composites, 2022, 125: 104323.

[26] [26] YANG K, SUN Z X, ZHOU J, et al. Hydration mechanism of anhydrite and calcium sulfoaluminate co-activated slag cement: insights into the role of composition[J]. Journal of Sustainable Cement-Based Materials, 2024, 13(4): 522-535.

[27] [27] GOLEWSKI G L. The phenomenon of cracking in cement concretes and reinforced concrete structures: the mechanism of cracks formation, causes of their initiation, types and places of occurrence, and methods of detection： a review[J]. Buildings, 2023, 13(3): 765.

[28] [28] WANG J R, ZHANG H B, GUO Y N, et al. Effect of different lime-anhydrite ratios on the hydration process of sulfoaluminate cement[J]. Journal of Materials in Civil Engineering, 2022, 34(10): 04022242.

[29] [29] WU Z M, KHAYAT K H, SHI C J, et al. Mechanisms underlying the strength enhancement of UHPC modified with nano-SiO2 and nano-CaCO3[J]. Cement and Concrete Composites, 2021, 119: 103992.

[30] [30] CUESTA A, SANTACRUZ I, DE LA TORRE A G, et al. Local structure and Ca/Si ratio in C-S-H gels from hydration of blends of tricalcium silicate and silica fume[J]. Cement and Concrete Research, 2021, 143: 106405.

[31] [31] ZHANG J Z, ZHOU X Y, ZHANG Y, et al. Stable process of concrete chloride diffusivity and corresponding influencing factors analysis[J]. Construction and Building Materials, 2020, 261: 119994.

[34] [34] LIU C, WANG F Z, ZHANG M Z. Modelling of 3D microstructure and effective diffusivity of fly ash blended cement paste[J]. Cement and Concrete Composites, 2020, 110: 103586.