[1] [1] Barnhart J. Manufacturing routes for metallic foams[J]. Solidification Science, 2000, 52(12): 22-27.

[2] [2] Matijasevic-Lux B, Banhart J, Fiechter S, et al.. Modification of titanium hydride for improved aluminum foam manufacture[J]. Acta Materialia, 2006, 54(7): 1887-1900.

[3] [3] Wen C E, Mabuchi M, Yamanda Y, et al.. Processing of biocompatible porous Ti and Mg[J]. Scripta Materialia, 2001, 45(10): 1147-1153.

[4] [4] Nakajima H. Fabrication, properties and application of porous metals with directional pores [J]. Progress in Materials Science, 2007, 52 (7): 1091-1173.

[5] [5] Wang Junwei, Chen Jing, Liu Yanhong, et al.. Research on microstructure of TC17 titanium alloy fabricated by laser forming[J]. Chinese J Lasers, 2010, 37(3): 847-851.

[6] [6] Yang Haiou, Lin Xin, Chen Jing, et al.. Functionally gradient materials prepared with laser rapid forming[J]. Chinese J Lasers, 2005, 32(4): 567-570.

[7] [7] Wu Weihui, Yang Yongqiang. Key techniques of selective laser melting rapid prototyping system[J]. Chinese Journal of Mechanical Engineering, 2007, 43(8): 175-180.

[8] [8] Lu Ying, Zhao Jibin, Qiao Hongchao. Investigation of technical and strengthening mechanism research of TiAl alloy by laser shock peening [J]. Chinese J Lasers, 2014, 41(10): 1003013.

[9] [9] Li Yang, Chen Changjun, Wang Xiaonan, et al.. Study on the process and properties of biomedical 316L porous stainless steel prepared by selective laser melting technique[J]. Applied Laser, 2015, 35(3): 319-323.

[10] [10] Zhang Dongyun. Model manufacturing process from aluminum alloys using selective laser melting[J]. Chinese J Lasers, 2007, 34(12): 1700-1704.

[11] [11] Zhang Xiaoli, Qi Huan, Wei Qingsong. Experimental study of selective laser melted AlSi12[J]. Applied Laser, 2013, 33(4): 391-397.

[12] [12] Cao Yupeng, Feng Aixin, Xue Wei, et al.. Experimental research and theoretical study of laser shock wave induced dynamic strain on 2024 aluminum alloy surface[J]. Chinese J Lasers, 2014, 41(9): 0903004.

[13] [13] Agarwala M, Bourell D, Beaman J. Direct selective laser sintering of metals[J]. Rapid Prototyping Journal, 1995, 1(1): 26-36.

[14] [14] Sun Daqing. Study on melting metal powder by selective laser melting[D]. Beijing: Beijing University of Technology, 2007.

[15] [15] Chen Guang, Fu Hengzhi. Non equilibrium solidification of new metal materials (2nd edition)[M]. Beijing: Science Press, 2005: 64-65.

[16] [16] Turnbull D. Under what condition can a glass be formed[J]. Contemporary Physics, 1969, 10(5): 473-488.

[17] [17] Zhang Jinshan. The principle of liquid metal[M]. Beijing: Chemical Industry Press, 2011: 138-142.

[18] [18] Hall E O. The deformation and ageing of milled steel: Ⅲ discussion of results[J]. Proceedings of the Physical Society Section B, 1951, 64(9): 747-752.

[19] [19] Petch N J. The cleavage strength of polycrystals[J]. Journal of the Iron and Steel Institute, 1953, 174: 25-28.

[20] [20] Oliver W C, Pharr G M. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments[J]. Journal of Materials Research and Technology, 1992, 7(6): 1564-1583.

[21] [21] Ren Mingxing, Li Bangsheng, Yang Chuang, et al.. Hardness and elastic modulus of microcastings by nanoindentation[J]. The Chinese Journal of Nonferrous Metals, 2008, 18(2): 231-236.