[1] [1] Li Ang, Li An, Zhang Lingyun et al.. Microstructure and wear resistance of laser melting deposited NiTi/Ni3Ti intermetallic alloys［J］. Chinese Journal of Nonferrous Metals, 2006, 16(5): 867～873

[2] [2] D. Y. Li. Development of novel wear-resistant materials: TiNi-based pseudoelastic tribomaterials［J］. Materials and Design, 2000, 21(6): 551～555

[3] [3] D. Y. Li. Development of novel tribo composites with TiNi shape memory alloy matrix［J］. Wear, 2003, 255(1): 617～628

[4] [4] Gao Fei, Wang Huaming. Abrasive wear property of laser melting/deposited Ti2Ni/TiNi intermetallic alloy［J］. Transactions of Nonferrous Metals Society of China, 2007, 17(6): 1358～1362

[5] [5] F. Gao, H. M. Wang. Dry sliding wear property of a laser melting/deposited Ti2Ni/TiNi intermetallic alloy［J］. Intermetallics, 2008, 16(2): 202～208

[6] [6] Ma Xingwei, Jin Zhuji, Gao Yuzhou. Effect of rare earth La2O3 on microstructure and tribological property of laser cladding FeAl based alloys and TiC reinforced composites coatings［J］. Chinese J. Lasers, 2010, 37(1): 271～276

[7] [7] Zhu Gangxian, Zhang Anfeng, Li Dichen. Effect of process parameters on surface smoothness in laser cladding［J］. Chinese J. Lasers, 2010, 37(1): 296～301

[8] [8] Gao Xuesong, Huang Yinhui, Tian Zongjun et al.. Erosive wear resistance behavior of laser cladding Al2O3+13%TiO2 coating prepared by plasma spraying on titanium alloy surface［J］. Chinese J. Lasers, 2010, 37(3): 858～862

[9] [9] Weijie Lu, Di Zhang, Xiaonong Zhang et al.. Creep rupture life of in situ synthesized (TiB+TiC)/Ti matrix composites［J］. Scripta Mater., 2001, 44(10): 2449～2455

[10] [10] Yafeng Yang, Huiyuan Wang, Yunhong Liang et al.. Fabrication of steel matrix composites locally reinforced with different ratios of TiC/TiB2 particulates using SHS reactions of Ni-Ti-B4C and Ni-Ti-B4C-C systems during casting［J］. Materials Science and Engineering A, 2007, 445-446: 398～404

[11] [11] Minmin Wang, Weijie Lu, Jining Qin et al.. Effect of volume fraction of reinforcement on room temperature tensile property of in situ (TiB+TiC)/Ti matrix composites［J］. Materials and Design, 2006, 27(6): 494～498

[12] [12] G. Wen, S. B. Li, B. S. Zhang et al.. Reaction Synthesis of TiB2-TiC composites with enhanced toughness［J］. Acta Mater., 2001, 49(8): 1463～1470

[13] [13] Tian Hao, Geng Lin, Ni Ding et al.. Microstructure of laser cladding coating with pre-placed B4C and B4C+Ti powders on TC4 substrate［J］. Rare Metal Materials and Engineering, 2007, 36(3): 420～423

[14] [14] Ding Shuo, Wen Guangwu, Lei Tingquan. The development of boron carbides［J］. Materials Science & Technology, 2003, 11(1): 101～105

[15] [15] Pei Lizhai, Xiao Hanning, Zhu Baojun et al.. Latest development of boron carbide powder and diphase ceramics［J］. Rare Metals and Cemented Carbides, 2004, 32(4): 46～50

[16] [16] Q. C. Jiang, H. Y. Wang, B. X. Ma et al.. Fabrication of B4C particulate reinforced magnesium matrix composite by powder metallurgy［J］. Journal of Alloys and Compounds, 2005, 386(1): 177～181