[1] [1] Yuan J L, Lyu B H, Hang W and Deng Q F 2017 Review on the progress of ultra-precision machining technologies Front. Mech. Eng. 12 158–80

[2] [2] Shore P, Cunningham C, DeBra D, Evans C, Hough J,Gilmozzi R, Kunzmann H, Morantz P and Tonnellier X 2010 Precision engineering for astronomy and gravity science CIRP Ann. 59 694–716

[3] [3] Brinksmeier E, Mutlugünes Y, Klocke F, Aurich J C, Shore P and Ohmori H 2010 Ultra-precision grinding CIRP Ann.59 652–71

[4] [4] Allen D M, Shore P, Evans R W, Fanara C, O’Brien W,Marson S and O’Neill W 2009 Ion beam, focused ion beam, and plasma discharge machining CIRP Ann.58 647–62

[5] [5] Hatefi S and Abou-El-Hossein K 2020 Review of single-point diamond turning process in terms of ultra-precision optical surface roughness Int. J. Adv.Manuf. Technol. 106 2167–87

[6] [6] Goel S 2014 The current understanding on the diamond machining of silicon carbide J. Phys. D: Appl. Phys.47 243001

[7] [7] Guo J, Zhang J G, Pan Y N, Kang R K, Namba Y, Shore P,Yue X B, Wang B R and Guo D M 2020 A critical review on the chemical wear and wear suppression of diamond tools in diamond cutting of ferrous metals Int. J. Extreme Manuf. 2 012001

[8] [8] Kim K S, Kim J H, Choi J Y and Lee C M 2011 A review on research and development of laser assisted turning Int. J.Precis. Eng. Manuf. 12 753–9

[9] [9] Hatefi S and Abou-El-Hossein K 2022 Review of magnetic-assisted single-point diamond turning for ultra-high-precision optical component manufacturing Int.J. Adv. Manuf. Technol. 120 1591–607

[10] [10] Fang F Z, Chen Y H, Zhang X D, Hu X T and Zhang G X 2011 Nanometric cutting of single crystal silicon surfaces modified by ion implantation CIRP Ann. 60 527–30

[11] [11] Brehl D E and Dow T A 2008 Review of vibration-assisted machining Precis. Eng. 32 153–72

[12] [12] El Mansori M, Pierron F and Paulmier D 2003 Reduction of tool wear in metal cutting using external electromotivesources Surf. Coat. Technol. 163–164 472–7

[13] [13] Huang S, Liu X, Chen F Z, Zheng H X, Yang X L, Wu L B,Song J L and Xu W J 2016 Diamond-cutting ferrous metals assisted by cold plasma and ultrasonic elliptical vibration Int. J. Adv. Manuf. Technol. 85 673–81

[14] [14] Jiao F, Niu Y, Zhang M J and Zhang C J 2016 Research on characteristics of tool wear in laser heating and ultrasonic vibration cutting of tungsten carbide Adv. Mech. Eng.8 1–9

[15] [15] Yip W S, To S and Sun Z W 2021 Hybrid ultrasonic vibration and magnetic field assisted diamond cutting of titanium alloys J. Manuf. Process. 62 743–52

[16] [16] Skelton R C 1968 Turning with an oscillating tool Int. J.Mach. Tool Des. Res. 8 239–59

[17] [17] Bass M, Copley S, Beck D G and Wallace R J 1979 Laser assisted hot spot machining AIP Conf. Proc.50 205–11

[18] [18] Muju M K and Ghosh A 1977 A model of adhesive wear in the presence of a magnetic field-I Wear 41 103–16

[19] [19] Shamoto E and Moriwaki T 1994 Study on elliptical vibration cutting CIRP Ann. 43 35–38

[20] [20] Ravindra D, Ghantasala M K and Patten J 2012 Ductile mode material removal and high-pressure phase transformation in silicon during micro-laser assisted machining Precis.Eng. 36 364–7

[21] [21] He C L, Zong W J, Xue C X and Sun T 2018 An accurate 3D surface topography model for single-point diamond turning Int. J. Mach. Tools Manuf. 134 42–68

[22] [22] Chen X, Liu C L, Ke J Y, Zhang J G, Shu X W and Xu J F2020 Subsurface damage and phase transformation in laser-assisted nanometric cutting of single crystal silicon Mater. Des. 190 108524

[23] [23] Zhang Z Y, Yan J W and Kuriyagawa T 2019 Manufacturing technologies toward extreme precision Int. J. Extreme Manuf. 1 022001

[24] [24] Temple P A, Lowdermilk W H and Milam D 1982 Carbon dioxide laser polishing of fused silica surfaces for increased laser-damage resistance at 1064 nm Appl. Opt.21 3249–55

[25] [25] Kordonsky W I, Prokhorov I V, Kashevsky B E, Jacobs S D,Puchebner B E, Hsu Y, Pietrowski D and Strafford D 1994 Glass polishing experiments using magnetorheological fluids Proc. Optical Fabrication and Testing Workshop(Optica Publishing Group)

[26] [26] Miyamoto I, Davies S T and Whitehouse D J 1988 Computer simulation of profile changes of hemi-spherical diamond styli during ion beam machining CIRP Ann. 37 171–4

[27] [27] Ikawa N, Shimada S, Moriwaki T, McKeown P A and Spragg R C 1993 Int. Progress in Precision Engineering

[28] [28] Shinmura T, Takazawa K, Hatano E, Matsunaga M and Matsuo T 1990 Study on magnetic abrasive finishing CIRP Ann. 39 325–8

[29] [29] Shamoto E and Moriwaki T 1999 Ultaprecision diamond cutting of hardened steel by applying elliptical vibration cutting CIRP Ann. 48 441–4

[30] [30] Shorey A B, Kordonski W I, Gorodkin S R, Jacobs S D,Gans R F, Kwong K M and Farny C H 1999 Design and testing of a new magnetorheometer Rev. Sci. Instrum.70 4200–6

[31] [31] ?zler L, ˙Inan A and ?zel C 2001 Theoretical and experimental determination of tool life in hot machining of austenitic manganese steel Int. J. Mach. Tools Manuf.41 163–72

[32] [32] Yin S H and Shinmura T 2004 Vertical vibration-assisted magnetic abrasive finishing and deburring for magnesium alloy Int. J. Mach. Tools Manuf. 44 1297–303

[33] [33] Shamoto E, Suzuki N, Tsuchiya E, Hori Y, Inagaki H and Yoshino K 2005 Development of 3 DOF ultrasonic vibration tool for elliptical vibration cutting of sculptured surfaces CIRP Ann. 54 321–4

[34] [34] Xu W J, Liu X, Song J L, Wu L B and Sun J 2012 Friction and wear properties of Ti6Al4V/WC-Co in cold atmospheric plasma jet Appl. Surf. Sci. 259 616–23

[35] [35] Yip W S and To S 2017 Reduction of material swelling and recovery of titanium alloys in diamond cutting by magnetic field assistance J. Alloys Compd. 722 525–31

[36] [36] Guo J, Jong H J H, Kang R K and Guo D M 2018 Novel localized vibration-assisted magnetic abrasive polishing method using loose abrasives for V-groove and Fresnel optics finishing Opt. Express 26 11608–19

[37] [37] Muhammad R, Ahmed N, Ullah H, Roy A and Silberschmidt V V 2018 Hybrid machining process: experimental and numerical analysis of hot ultrasonically assisted turning Int. J. Adv. Manuf. Technol. 97 2173–92

[38] [38] Arif M, Rahman M and San W Y 2012 An experimental investigation into micro ball end-milling of silicon J.Manuf. Process. 14 52–61

[39] [39] Huang W H and Yan J W 2023 Towards understanding the mechanism of vibration-assisted cutting of monocrystalline silicon by cyclic nanoindentation J.Mater. Process. Technol. 311 117797

[40] [40] Chen Y L, Cai Y D, Shimizu Y, Ito S, Gao W and Ju B F 2016 Ductile cutting of silicon microstructures with surface inclination measurement and compensation by using a force sensor integrated single point diamond tool J. Micromech. Microeng. 26 025002

[41] [41] Huang W H, Yu D P, Zhang X Q, Zhang M and Chen D S 2018 Ductile-regime machining model for ultrasonic elliptical vibration cutting of brittle materials J. Manuf.Process. 36 68–76

[42] [42] Xiao H P, Liang R G, Spires O, Wang H R, Wu H and Zhang Y Y 2019 Evaluation of surface and subsurface damages for diamond turning of ZnSe crystal Opt. Express 27 28364–82

[43] [43] Wang S F, An C H, Zhang F H, Wang J, Lei X Y and Zhang J F 2016 An experimental and theoretical investigation on the brittle ductile transition and cutting force anisotropy in cutting KDP crystal Int. J. Mach. Tools Manuf. 106 98–108

[44] [44] Huang W H and Yan J W 2020 Surface formation mechanism in ultraprecision diamond turning of coarse-grained polycrystalline ZnSe Int. J. Mach. Tools Manuf. 153 103554

[45] [45] Zhong J S, Chen D Q, Peng Y Z, Lu Y D, Chen X, Li X Y and Ji Z G 2018 A review on nanostructured glass ceramics for promising application in optical thermometry J. Alloys Compd. 763 34–48

[46] [46] Liang Y H and Dutta S P 2001 Application trend in advanced ceramic technologies Technovation 21 61–65

[47] [47] Zhang Z, Zhao R C and Zhao W X 2007 Fabrication technique of large-scale lightweight SiC space mirror Proc. SPIE 6721 67210B

[48] [48] Zheng F F, Kang R K, Dong Z G, Guo J, Liu J T and Zhang J T 2018 A theoretical and experimental investigation on ultrasonic assisted grinding from the single-grain aspect Int. J. Mech. Sci. 148 667–75

[49] [49] Jia D Z, Li C H, Zhang Y B, Yang M, Zhang X P, Li R Z and Ji H J 2019 Experimental evaluation of surface topographies of NMQL grinding ZrO2 ceramics combining multiangle ultrasonic vibration Int. J. Adv.Manuf. Technol. 100 457–73

[50] [50] Kitzig-Frank H, Tawakoli T and Azarhoushang B 2017 Material removal mechanism in ultrasonic-assisted grinding of Al2O3 by single-grain scratch test Int. J. Adv.Manuf. Technol. 91 2949–62

[51] [51] Wang J S and Fang F Z 2021 Nanometric cutting mechanism of silicon carbide CIRP Ann. 70 29–32

[52] [52] Rouxel T 2007 Elastic properties and short-to medium-range order in glasses J. Am. Ceram. Soc. 90 3019–39

[53] [53] Zhou M, Ngoi B K A, Yusoff M N and Wang X J 2006 Tool wear and surface finish in diamond cutting of optical glass J. Mater. Process. Technol. 174 29–33

[54] [54] Gilmozzi R and Spyromilio J 2008 The 42m European ELT:status Proc. SPIE 7012 701219

[55] [55] Reddy B E 2013 India’s participation in the thirty-meter telescope project J. Astrophys. Astron. 34 87–95

[56] [56] Zhang H L, Zhang M F, Hu Z G, Han J C, Guo H X and Xu C H 2013 Mechanical characteristics of sapphire before and after neutron irradiation Physica B 408 34–38

[57] [57] French R H and Tran H V 2009 Immersion lithography:photomask and wafer-level materials Annu. Rev. Mater.Res. 39 93–126

[58] [58] Zhou M and Zhao P Y 2016 Prediction of critical cutting depth for ductile-brittle transition in ultrasonic vibration assisted grinding of optical glasses Int. J. Adv. Manuf.Technol. 86 1775–84

[59] [59] Ezugwu E O and Wang Z M 1997 Titanium alloys and their machinability-a review J. Mater. Process. Technol.68 262–74

[60] [60] Chen G, Caudill J, Chen S and Jawahir I S 2022 Machining-induced surface integrity in titanium alloy Ti-6Al-4V: an investigation of cutting edge radius and cooling/lubricating strategies J. Manuf. Process.74 353–64

[61] [61] Thakur A, Gangopadhyay S and Maity K P 2014 Effect of cutting speed and tool coating on machined surface integrity of ni-based super alloy Process. CIRP 14 541–5

[62] [62] Wang R, Yang D Y, Wang W, Wei F R, Lu Y W and Li Y Q 2022 Tool wear in nickel-based superalloy machining: an overview Processes 10 2380

[63] [63] Liu K and Li X P 2001 Ductile cutting of tungsten carbide J.Mater. Process. Technol. 113 348–54

[64] [64] Nath C, Rahman M and Neo K S 2009 A study on the effect of tool nose radius in ultrasonic elliptical vibration cutting of tungsten carbide J. Mater. Process. Technol. 209 5830–6

[65] [65] Liao Z R, Abdelhafeez A, Li H N, Yang Y, Diaz O G and Axinte D 2019 State-of-the-art of surface integrity in machining of metal matrix composites Int. J. Mach. Tools Manuf. 143 63–91

[66] [66] Xu J K, Tian J W, Zhai C T, Nie X Y and Yu H D 2021 Research on laser-assisted orthogonal micromachining technology of Cf/SiC composite Int. J. Adv. Manuf.Technol. 115 4047–58

[67] [67] Dhanasekar S et al 2022 A comprehensive study of ceramic matrix composites for space applications Adv. Mater. Sci.Eng. 2022 6160591

[68] [68] Meng Q X, Cai J, Cheng H and Zhang K F 2020 Investigation of CFRP cutting mechanism variation and the induced effects on cutting response and damage distribution Int. J. Adv. Manuf. Technol. 106 2893–907

[69] [69] Zhang B Y, Sui T Y, Lin B, Zheng W, Li S P, Fang S,Huang Y and Feng Y Q 2022 Drilling process of Cf/SiC ceramic matrix composites: cutting force modeling, machining quality and PCD tool wear analysis J. Mater.Process. Technol. 304 117566

[70] [70] Song Y, Cao H J, Zheng W, Qu D, Liu L and Yan C P 2022 Cutting force modeling of machining carbon fiber reinforced polymer (CFRP) composites: a review Compos.Struct. 299 116096

[71] [71] Ge Y F, Xu J H, Yang H, Luo S B and Fu Y C 2008 Workpiece surface quality when ultra-precision turning of SiCp/Al composites J. Mater. Process. Technol.203 166–75

[72] [72] Yan J W, Asami T, Harada H and Kuriyagawa T 2009 Fundamental investigation of subsurface damage in single crystalline silicon caused by diamond machining Precis.Eng. 33 378–86

[73] [73] Song H W, Dan J Q, Chen X, Xiao J F and Xu J F 2018 Experimental investigation of machinability in laser-assisted machining of fused silica Int. J. Adv. Manuf. Technol. 97 267–78

[74] [74] Kong X J, Yang L J, Zhang H Z, Chi G X and Wang Y 2017 Optimization of surface roughness in laser-assisted machining of metal matrix composites using Taguchi method Int. J. Adv. Manuf. Technol. 89 529–42

[75] [75] Ginting A and Nouari M 2009 Surface integrity of dry machined titanium alloys Int. J. Mach. Tools Manuf.49 325–32

[76] [76] Guerrini G, Lutey A H A, Melkote S N and Fortunato A 2018 High throughput hybrid laser assisted machining of sintered reaction bonded silicon nitride J. Mater. Process.Technol. 252 628–35

[77] [77] Rajagopal S, Plankenhorn D J and Hill V L 1982 Machining aerospace alloys with the aid of a 15 kW laser J. Appl.Metalwork. 2 170–84

[78] [78] Dumitrescu P, Koshy P, Stenekes J and Elbestawi M A 2006 High-power diode laser assisted hard turning of AISI D2 tool steel Int. J. Mach. Tools Manuf. 46 2009–16

[79] [79] Song H W, Dan J Q, Li J L, Du J, Xiao J F and Xu J F 2019 Experimental study on the cutting force during laser-assisted machining of fused silica based on the Taguchi method and response surface methodology J.Manuf. Process. 38 9–20

[80] [80] Ke J Y, Chen X, Liu C L, Zhang J G, Yang H and Xu J F 2022 Enhancing the ductile machinability of single-crystal silicon by laser-assisted diamond cutting Int. J. Adv.Manuf. Technol. 118 3265–82

[81] [81] Lei S T, Shin Y C and Incropera F P 2000 Deformation mechanisms and constitutive modeling for silicon nitride undergoing laser-assisted machining Int. J. Mach. Tools Manuf. 40 2213–33

[82] [82] Kuar A S, Doloi B and Bhattacharyya B 2006 Modelling and analysis of pulsed Nd:YAG laser machining characteristics during micro-drilling of zirconia (ZrO2) Int. J. Mach.Tools Manuf. 46 1301–10

[83] [83] Guo Y J, Yang X J, Kang J, Li M Z, Xie Q M, Xiao J G and Zhang W Q 2021 Experimental investigations on the laser-assisted machining of single crystal Si for optimal machining Opt. Laser Technol. 141 107113

[84] [84] Mohammadi H, Ravindra D, Kode S K and Patten J A 2015 Experimental work on micro laser-assisted diamond turning of silicon (111) J. Manuf. Process. 19 125–8

[85] [85] Langan S M, Ravindra D and Mann A B 2018 Process parameter effects on residual stress and phase purity after microlaser-assisted machining of silicon Mater. Manuf.Process. 33 1578–86

[86] [86] Shahinian H, Di K, Navare J, Bodlapati C, Zaytsev D and Ravindra D 2020 Ultraprecision laser-assisted diamond machining of single crystal Ge Precis. Eng.65 149–55

[87] [87] Geng R W, Yang X J, Xie Q M, Zhang R Y, Zhang W Q,Qiu H F, Mu R, Yang W S and Li R 2021 Investigation of surface integrity and material removal mechanism ofsingle-crystal Si subjected to micro-laser-assisted machining Infrared Phys. Technol. 118 103868

[88] [88] He W B, Liu C L, Xu G Q, Zhang J G, Xiao J F, Chen X and Xu J F 2021 Effect of temperature on ductile-to-brittle transition in diamond cutting of silicon Int. J. Adv. Manuf.Technol. 116 3447–62

[89] [89] Liu C L, Chen X, Ke J Y, She Z D, Zhang J G, Xiao J F and Xu J F 2021 Numerical investigation on subsurface damage in nanometric cutting of single-crystal silicon at elevated temperatures J. Manuf. Process. 68 1060–71

[90] [90] Lin C T, Chen X, He W B, Xu G Q, Liu C L, Zhang J G and Xu J F 2022 Experimental investigation on the ductile machinability of fused silica during in-situ laser assisted diamond cutting J. Manuf. Process. 84 383–93

[91] [91] Huang K, Shen Z F, Zheng Z D, Lin C T, Huang W Q,Zhang J G, Chen X, Xiao J F and Xu J F 2022 Investigation on the machinability of nitriding mold steel by applying in-situ laser assisted diamond cutting J.Manuf. Process. 84 149–61

[92] [92] You K Y, Fang F Z, Yan G P and Zhang Y 2020 Experimental investigation on laser assisted diamond turning of binderless tungsten carbide by in-process heating Micromachines 11 1104

[93] [93] You K Y, Fang F Z and Yan G P 2021 Surface generation of tungsten carbide in laser-assisted diamond turning Int. J.Mach. Tools Manuf. 168 103770

[94] [94] You K Y and Fang F Z 2022 High effective laser assisted diamond turning of binderless tungsten carbide J. Mater.Process. Technol. 302 117505

[95] [95] Dandekar C R and Shin Y C 2013 Experimental evaluation of laser-assisted machining of silicon carbide particle-reinforced aluminum matrix composites Int. J.Adv. Manuf. Technol. 66 1603–10

[96] [96] Pirouz P 1998 On micropipes and nanopipes in SiC and GaN Phil. Mag. A 78 727–36

[97] [97] Yonenaga I 2001 Thermo-mechanical stability of wide-bandgap semiconductors: high temperature hardness of SiC, AlN, GaN, ZnO and ZnSe Physica B 308–310 1150–2

[98] [98] Lauener C M, Petho L, Chen M, Xiao Y, Michler J and Wheeler J M 2018 Fracture of Silicon: influence of rate,positioning accuracy, FIB machining, and elevated temperatures on toughness measured by pillar indentation splitting Mater. Des. 142 340–9

[99] [99] Zheng Z D, Huang K, Lin C T, Zhang J G, Wang K, Sun P and Xu J F 2022 An analytical force and energy model for ductile-brittle transition in ultra-precision grinding of brittle materials Int. J. Mech. Sci. 220 107107

[100] [100] Fang F Z and Chen L J 2000 Ultra-precision cutting for ZKN7 glass CIRP Ann. 49 17–20

[101] [101] Yan J W, Asami T, Harada H and Kuriyagawa T 2012 Crystallographic effect on subsurface damage formation in silicon microcutting CIRP Ann. 61 131–4

[102] [102] Bifano T G, Dow T A and Scattergood R O 1991 Ductile-regime grinding: a new technology for machining brittle materials J. Eng. Ind. 113 184–9

[103] [103] You K Y, Yan G P, Luo X C, Gilchrist M D and Fang F Z 2020 Advances in laser assisted machining of hard and brittle materials J. Manuf. Process. 58 677–92

[104] [104] Ravindra D 2011 Ductile Mode Material Removal of Ceramics and Semiconductors (Western Michigan University)

[105] [105] Oh W J and Lee C M 2021 A study on the process efficiency of laser-assisted machining investigating energy consumption Int. J. Adv. Manuf. Technol. 113 867–82

[106] [106] Tian Y G and Shin Y C 2006 Thermal modeling for laser-assisted machining of silicon nitride ceramics with complex features J. Manuf. Sci. Eng. 128 425–34

[107] [107] Yang J H, Sun S J, Brandt M and Yan W Y 2010 Experimental investigation and 3D finite element prediction of the heat affected zone during laser assisted machining of Ti6Al4V alloy J. Mater. Process. Technol.210 2215–22

[108] [108] Rozzi J C, Incropera F P and Shin Y C 2000 Transient,three-dimensional heat transfer model for the laser assisted machining of silicon nitride: II. Assessment of parametric effects Int. J. Heat Mass Transfer 43 1425–37

[109] [109] Ren G Q, Song H W, Dan J Q, Li J L, Pan P F, Yang Z H,Xiao J F and Xu J F 2020 Thermal analysis and machinability for laser-assisted machining of fused silica Int. J. Heat Mass Transfer 148 119078

[110] [110] Fang F Z, Lai M, Wang J S, Luo X C, Yan J W and Yan Y D 2022 Nanometric cutting: mechanisms, practices and future perspectives Int. J. Mach. Tools Manuf. 178 103905

[111] [111] Mujica A, Rubio A, Mu?noz A and Needs R J 2003 High-pressure phases of group-IV, III–V, and II–VI compounds Rev. Mod. Phys. 75 863–912

[112] [112] Gilman J J 1995 Mechanism of shear-induced metallization Czech. J. Phys. 45 913–9

[113] [113] Pajot B and Clerjaud B 2013 Optical Absorption of Impurities and Defects in Semiconducting Crystals:Electronic Absorption of Deep Centres and Vibrational Spectra (Springer)

[114] [114] Zhou M, Wang X J, Ngoi B K A and Gan J G K 2002 Brittle-ductile transition in the diamond cutting of glasses with the aid of ultrasonic vibration J. Mater. Process.Technol. 121 243–51

[115] [115] Zhang X Q, Huang R, Wang Y, Liu K, Deng H and Neo D W K 2022 Suppression of diamond tool wear with sub-millisecond oxidation in ultrasonic vibration cutting of steel J. Mater. Process. Technol. 299 117320

[116] [116] Zhou M, Eow Y T, Ngoi B K A and Lim E N 2003 Vibration-assisted precision machining of steel with PCD tools Mater. Manuf. Process. 18 825–34

[117] [117] Muhammad R, Hussain M S, Maurotto A, Siemers C, Roy A and Silberschmidt V V 2014 Analysis of a free machining α+β titanium alloy using conventional and ultrasonically assisted turning J. Mater. Process. Technol. 214 906–15

[118] [118] Zhang J G, Yuan H X, Feng L Q, Zhang J J, Chen X, Xiao J F and Xu J F 2023 Enhanced machinability of Ni-based single crystal superalloy by vibration-assisted diamond cutting Precis. Eng. 79 300–9

[119] [119] Suzuki N, Haritani M, Yang J, Hino R and Shamoto E 2007 Elliptical vibration cutting of tungsten alloy molds for optical glass parts CIRP Ann. 56 127–30

[120] [120] Tan R K, Zhao X S, Guo S S, Zou X C, He Y, Geng Y Q,Hu Z J and Sun T 2020 Sustainable production of dry-ultra-precision machining of Ti–6Al–4V alloy using PCD tool under ultrasonic elliptical vibration-assisted cutting J. Clean. Prod. 248 119254

[121] [121] Zhang J G, Suzuki N, Wang Y L and Shamoto E 2014 Fundamental investigation of ultra-precision ductile machining of tungsten carbide by applying elliptical vibration cutting with single crystal diamond J. Mater.Process. Technol. 214 2644–59

[122] [122] Zhang J G, Zhang J J, Cui T, Hao Z W and Al Zahrani A 2017 Sculpturing of single crystal silicon microstructures by elliptical vibration cutting J. Manuf. Process. 29 389–98

[123] [123] Zhang J G, Zhang J J, Liu C L, Chen X, Xiao J F and Xu J F 2020 Machinability of single crystal calcium fluoride by applying elliptical vibration diamond cutting Precis. Eng.66 306–14

[124] [124] Kurniawan R, Ali S, Park K M, Li C P and Ko T J 2019 Development of a three-dimensional ultrasonic elliptical vibration transducer (3D-UEVT) based on sandwiched piezoelectric actuator for micro-grooving Int. J. Precis.Eng. Manuf. 20 1229–40

[125] [125] Lotfi M, Sajjady S A and Amini S 2019 Wettability analysis of titanium alloy in 3D elliptical ultrasonic assisted turning Int. J. Lightweight Mater. Manuf. 2 235–40

[126] [126] Sui H, Zhang L F, Wang S and Gu Z J 2020 Transient separation cutting characteristic of axial ultrasonic vibration–assisted cutting Int. J. Adv. Manuf. Technol.110 2407–25

[127] [127] Liu X F, Zhang J H, Hu X Y and Wu D B 2019 Influence of tool material and geometry on micro-textured surface in radial ultrasonic vibration-assisted turning Int. J. Mech.Sci. 152 545–57

[128] [128] Ning F D and Cong W L 2020 Ultrasonic vibration-assisted(UV-A) manufacturing processes: state of the art and future perspectives J. Manuf. Process. 51 174–90

[129] [129] Yang Z C, Zhu L D, Zhang G X, Ni C B and Lin B 2020 Review of ultrasonic vibration-assisted machining in advanced materials Int. J. Mach. Tools Manuf. 156 103594

[130] [130] Bai W, Wang K, Du D X, Zhang J G, Huang W and Xu J F 2022 Design of an ultrasonic elliptical vibration device with two stationary points for ultra-precision cutting Ultrasonics 120 106662

[131] [131] Wang J J, Du H H, Gao S M, Yang Y, Zhu Z W and Guo P2019 An ultrafast 2D non-resonant cutting tool for texturing micro-structured surfaces J. Manuf. Process.48 86–97

[132] [132] Moriwaki T and Shamoto E 1995 Ultrasonic elliptical vibration cutting CIRP Ann. 44 31–34

[133] [133] Suzuki N, Yokoi H and Shamoto E 2011 Micro/nano sculpturing of hardened steel by controlling vibration amplitude in elliptical vibration cutting Precis. Eng.35 44–50

[134] [134] Shamoto E, Suzuki N, Moriwaki T and Naoi Y 2002 Development of ultrasonic elliptical vibration controller for elliptical vibration cutting CIRP Ann. 51 327–30

[135] [135] Guo P and Ehmann K F 2013 Development of a tertiary motion generator for elliptical vibration texturing Precis.Eng. 37 364–71

[136] [136] Zhang C and Song Y 2019 Design and kinematic analysis of a novel decoupled 3D ultrasonic elliptical vibration assisted cutting mechanism Ultrasonics 95 79–94

[137] [137] Kurniawan R, Ko T J, Kumaran S T and Ahmed F 2021 3-DOF ultrasonic elliptical vibration tool holder based on coupled resonance modes for manufacturing micro-groove Precis. Eng. 67 212–31

[138] [138] Nath C and Rahman M 2008 Effect of machining parameters in ultrasonic vibration cutting Int. J. Mach. Tools Manuf.48 965–74

[139] [139] Blake P N and Scattergood R O 1990 Ductile-regime machining of germanium and silicon J. Am. Ceram. Soc.73 949–57

[140] [140] Zhang X Q, Senthil Kumar A, Rahman M, Nath C and Liu K 2012 An analytical force model for orthogonal elliptical vibration cutting technique J. Manuf. Process. 14 378–87

[141] [141] Nath C, Rahman M and Neo K S 2011 Modeling of the effect of machining parameters on maximum thickness of cut in ultrasonic elliptical vibration cutting J. Manuf. Sci. Eng.133 011007

[142] [142] Liu X M, Yu D P, Chen D S, Yang S Y, Wen Y N and Xiao Y 2021 Self-tuned ultrasonic elliptical vibration cutting for high-efficient machining of micro-optics arrays on brittle materials Precis. Eng. 72 370–81

[143] [143] Dai H F, Du H, Chen J B and Chen G Y 2019 Influence of elliptical vibration on the behavior of silicon during nanocutting Int. J. Adv. Manuf. Technol. 102 3597–612

[144] [144] Liu C L, Zhang J G, Zhang J J, Chen X, Xiao J F and Xu J F 2020 A simulation investigation on elliptical vibration cutting of single-crystal silicon Int. J. Adv. Manuf.Technol. 108 2231–43

[145] [145] Liu C L, Zhang J G, Zhang J J, Chu J N, Chen X, Xiao J F and Xu J F 2021 Numerical investigation on material removal mechanism in elliptical vibration cutting of single-crystal silicon Mater. Sci. Semicond. Process.134 106019

[146] [146] Li S Y, Han J G, Yu H Q, Wang J H, Lu M M, Tian Y B and Lin J Q 2022 Finite element investigation on cutting force and residual stress in 3D elliptical vibration cutting Ti6Al4V Micromachines 13 1278

[147] [147] Yin S, Bao Y, Pan Y N, Dong Z G, Jin Z J and Kang R K 2022 Design of ultrasonic elliptical vibration cutting system for tungsten heavy alloy Front. Mech. Eng. 17 59

[148] [148] Jiang F, Yan L, Huang Y and Xu X P 2016 Review on magnetic field assisted machining technology J. Mech.Eng. 52 1–9

[149] [149] Xu L and Liu W M 1985 The property of magnetized HSS turning tool J. Dalian Jiaotong Univ. 1 11–24

[150] [150] Li Q H and Mu D Q 2006 The influence of low frequency pulse magnetization on the performence of tools Manuf.Technol. Mach. Tool 4 63–65

[151] [151] Dehghani A, Amnieh S K, Tehrani A F and Mohammadi A 2017 Effects of magnetic assistance on improving tool wear resistance and cutting mechanisms during steel turning Wear 384–385 1–7

[152] [152] El Mansori M and Mkaddem A 2007 Surface plastic deformation in dry cutting at magnetically assisted machining Surf. Coat. Technol. 202 1118–22

[153] [153] El Mansori M, Iordache V, Seitier P and Paulmier D 2004 Improving surface wearing of tools by magnetization when cutting dry Surf. Coat. Technol. 188–189 566–71

[154] [154] Yip W S and To S 2017 Tool life enhancement in dry diamond turning of titanium alloys using an eddy current damping and a magnetic field for sustainable manufacturing J. Clean. Prod. 168 929–39

[155] [155] Yip W S and To S 2019 Control of the ductile and brittle behavior of titanium alloys in diamond cutting by applying a magnetic field Sci. Rep. 9 4056

[156] [156] Yip W S and To S 2019 Effects of magnetic field on microstructures and mechanical properties of titanium alloys in ultra-precision diamond turning Mater. Res.Express 6 056553

[157] [157] Yip W S and To S 2019 Reduction of minimum cutting thickness of titanium alloys in micro cutting by a magnetic field assistance IEEE Access 7 152034–41

[158] [158] Yip W S and To S 2019 Reduction of tool tip vibration in single-point diamond turning using an eddy current damping effect Int. J. Adv. Manuf. Technol.103 1799–809

[159] [159] Wu X, Zhou Y, Fang C F, Zhu L F, Jiang F, Sun K, Li Y and Lin Y Y 2022 Experimental investigation on the machinability improvement in magnetic-field-assisted turning of single-crystal copper Micromachines13 2147

[160] [160] Guo Y F, Lee Y J, Zhang Y and Wang H 2022Magneto-plasticity in micro-cutting of single-crystal copper J. Mater. Sci. Technol. 124 121–34

[161] [161] Guo Y F, Lee Y J, Zhang Y, Sorkin A, Manzhos S and Wang H 2022 Effect of a weak magnetic field on ductile–brittle transition in micro-cutting of single-crystal calcium fluoride J. Mater. Sci. Technol. 112 96–113

[162] [162] Xiao J F, Guo F, Zhang C, Chen X, Zhang J G and Xu J F2022 Experimental investigation for ultra-precision cutting of nickel based superalloy with the assistance of magnetic field Sci. China Technol. Sci. 65 2170–7

[163] [163] Jing X W and Tang X R 2002 Research on magnetic technology of improving cutter lifespan Mach. Des.Manuf. 5 81–83

[164] [164] Yu Q, Li S C, Zhang X and Shao M H 2019 Experimental study on correlation between turning temperature rise and turning vibration in dry turning on aluminum alloy Int. J.Adv. Manuf. Technol. 103 453–69

[165] [165] Sodano H A and Bae J S 2004 Eddy current damping in structures Shock Vibrat. Dig. 36 469–78

[166] [166] Nkurikiyimfura I, Wang Y M and Pan Z D 2013 Heat transfer enhancement by magnetic nanofluids—a review Renew. Sustain. Energy Rev. 21 548–61

[167] [167] Syam Sundar L, Singh M K and Sousa A C M 2013 Investigation of thermal conductivity and viscosity of Fe3O4 nanofluid for heat transfer applications Int.Commun. Heat Mass Transfer 44 7–14

[168] [168] Liu X, Zhang F, Liu J Y, Zhang J C, Chen Y, Zhang Z T,Shen H Y, Kong J X and Sun J 2020 Atmospheric pressure plasma-assisted precision turning of pure iron material Int.J. Adv. Manuf. Technol. 106 5187–97

[169] [169] Xu W J, Huang S, Chen F Z, Song J L and Liu X 2014 Diamond wear properties in cold plasma jet Diam. Relat.Mater. 48 96–103

[170] [170] Liu X, Huang S, Chen F Z, Yang X L, Wu L B and Xu W J 2015 Research on the cold plasma jet assisted cutting of Ti6Al4V Int. J. Adv. Manuf. Technol. 77 2125–33

[171] [171] Wang J S, Zhang X D, Fang F Z and Chen R T 2019 Diamond cutting of micro-structure array on brittle material assisted by multi-ion implantation Int. J. Mach.Tools Manuf. 137 58–66

[172] [172] Liu B, Xu Z W, Wang Y, Gao X and Kong R J 2020 Effect of ion implantation on material removal mechanism of 6H-SiC in nano-cutting: a molecular dynamics study Computat. Mater. Sci. 174 109476

[173] [173] Wang J S 2014 Study on Ultra-Precision Machining Assisted with Ion Implantation (Tianjin University)

[174] [174] Wang J S, Fang F Z and Zhang X D 2015 An experimental study of cutting performance on monocrystalline germanium after ion implantation Precis. Eng. 39 220–3

[175] [175] Lee Y J, Hao L, Lüder J, Chaudhari A, Wang S Y, Manzhos S and Wang H 2019 Micromachining of ferrous metal with an ion implanted diamond cutting tool Carbon 152 598–608

[176] [176] Baili M, Wagner V, Dessein G, Sallaberry J and Lallement D 2011 An experimental investigation of hot machining with induction to improve Ti-5553 machinability Appl. Mech.Mater. 62 67–76

[177] [177] Kizaki T, Harada K and Mitsuishi M 2014 Efficient and precise cutting of zirconia ceramics using heated cutting tool CIRP Ann. 63 105–8

[178] [178] Bermingham M J, Palanisamy S and Dargusch M S 2012 Understanding the tool wear mechanism during thermally assisted machining Ti-6Al-4V Int. J. Mach. Tools Manuf.62 76–87

[179] [179] Maity K P and Swain P K 2008 An experimental investigation of hot-machining to predict tool life J. Mater.Process. Technol. 198 344–9

[180] [180] Parida A K and Maity K 2020 FEM and experimental analysis of thermal assisted machining of titanium base alloys Measurement 152 107292

[181] [181] Jiao F, Niu Y and Zhang M J 2018 Prediction of machining dimension in laser heating and ultrasonic vibration composite assisted cutting of tungsten carbide J. Adv.Manuf. Syst. 17 35–45

[182] [182] Jiao F, Zhang M J and Niu Y 2019 Optimization of tungsten carbide processing parameters for laser heating and ultrasonic vibration composite assisted cutting Proc. Inst.Mech. Eng. C 233 4140–53

[183] [183] Kim J, Zani L, Abdul-Kadir A, Jones L, Roy A, Zhao L G and Silberschmidt V V 2022 Hybrid-hybrid machining of SiC-reinforced aluminium metal matrix composite Manuf.Lett. 32 63–66

[184] [184] Peng P C, Xiang D H, Li Y Q, Yuan Z J, Lei X F, Li B,Liu G F, Zhao B and Gao G F 2022 Experimental study on laser assisted ultrasonic elliptical vibration turning(LA-UEVT) of 70% SiCp/Al composites Ceram. Int.48 33538–52

[185] [185] Liu C L, He W B, Chu J N, Zhang J G, Chen X, Xiao J F and Xu J F 2021 Molecular dynamics simulation on cutting mechanism in the hybrid machining process of single-crystal silicon Nanoscale Res. Lett. 16 66

[186] [186] Tang Q C, Yin S H, Chen F J, Huang S and Luo H 2018 New technology for cutting ferrous metal with diamond tools Diam. Relat. Mater. 88 32–42

[187] [187] Sofuo?glu M A, Fh ?, Gürgen S, Orak S and Mc K 2018 Experimental investigation of machining characteristics and chatter stability for Hastelloy-X with ultrasonic and hot turning Int. J. Adv. Manuf. Technol. 95 83–97

[188] [188] Temmler A, Willenborg E and Wissenbach K 2012 Laser polishing Proc. SPIE 8243 82430W

[189] [189] Ramos J A, Bourell D L and Beaman J J 2002 Surface over-melt during laser polishing of indirect-SLS metal parts MRS Online Proc. Library 758 19

[190] [190] Ukar E, Lamikiz A, de Lacalle L L, Del Pozo D and Arana J L 2010 Laser polishing of tool steel with CO2 laser and high-power diode laser Int. J. Mach. Tools Manuf. 50 115–25

[191] [191] Ramos-Grez J A and Bourell D L 2004 Reducing surface roughness of metallic freeform-fabricated parts using non-tactile finishing methods Int. J. Mater. Prod. Technol.21 297–316

[192] [192] Ma C, Vadali M, Duffie N A, Pfefferkorn F E and Li X C 2013 Effect of thermocapillary flow on the surface profile in pulsed laser micro polishing Proc. 8th Int. Conf. on MicroManufacturing pp 1–8

[193] [193] Anthony T R and Cline H E 1977 Surface rippling induced by surface-tension gradients during laser surface melting and alloying J. Appl. Phys. 48 3888–94

[194] [194] Zhang C, Zhou J and Shen H 2017 Role of capillary and thermocapillary forces in laser polishing of metals J.Manuf. Sci. Eng. 139 041019

[195] [195] Temmler A, Liu D, Preu?ner J, Oeser S, Luo J, Poprawe R and Schleifenbaum J H 2020 Influence of laser polishing on surface roughness and microstructural properties of the remelted surface boundary layer of tool steel H11 Mater.Des. 192 108689

[196] [196] Nüsser C, Wehrmann I and Willenborg E 2011 Influence of intensity distribution and pulse duration on laser micro polishing Phys. Proc. 12 462–71

[197] [197] Wang Q H, Morrow J D, Ma C, Duffie N A and Pfefferkorn F E 2015 Surface prediction model for thermocapillary regime pulsed laser micro polishing of metals J. Manuf. Process. 20 340–8

[198] [198] Weingarten C, Schmickler A, Willenborg E, Wissenbach K and Poprawe R 2017 Laser polishing and laser shape correction of optical glass J. Laser Appl. 29 011702

[199] [199] He T, Wei C Y, Jiang Z G, Zhao Y N and Shao J D 2018 Super-smooth surface demonstration and the physical mechanism of CO2 laser polishing of fused silica Opt.Lett. 43 5777–80

[200] [200] Zhao L J, Cheng J, Chen M J, Yuan X D, Liao W, Liu Q,Yang H and Wang H J 2019 Formation mechanism of a smooth, defect-free surface of fused silica optics using rapid CO2 laser polishing Int. J. Extreme Manuf. 1 035001

[201] [201] Chen H, Wei C Y, Cao Z, Peng X C, Jiang Z G and Shao J D 2022 Femtosecond laser-selective polishing of RB-SiC at a fluence between its two-phase threshold Opt. Mater.Express 12 1491–501

[202] [202] Temmler A, Graichen K and Donath J 2010 Laser polishing in medical engineering Laser Technol. J. 7 53–57

[203] [203] Xu G, Dai Y T, Cui J L, Xiao X, Mei H P and Li H L 2017 Simulation and experiment of femtosecond laser polishing quartz material Integr. Ferroelectr. 181 60–69

[204] [204] Niitsu K, Tayama Y, Kato T, Maehara H and Yan J W 2018 Characterization of recrystallized depth and dopant distribution in laser recovery of grinding damage in single-crystal silicon Mater. Sci. Semicond. Process.82 54–61

[205] [205] Oreshkin O, Küpper M, Temmler A and Willenborg E 2015 Active reduction of waviness through processing with modulated laser power J. Laser Appl. 27 022004

[206] [206] Ostholt R, Willenborg E and Wissenbach K 2010 Laser polishing of metallic freeform surfaces Proc. 4th Pacific Int. Conf. on Laser Materials Processing, Micro, Nano and Ultrafast Fabrication (Wuhan, China)pp 597–603

[207] [207] Chen L, Richter B, Zhang X Z, Bertsch K B, Thoma D J and Pfefferkorn F E 2021 Effect of laser polishing on the microstructure and mechanical properties of stainless steel 316L fabricated by laser powder bed fusion Mater. Sci.Eng. A 802 140579

[208] [208] Marimuthu S, Triantaphyllou A, Antar M, Wimpenny D,Morton H and Beard M 2015 Laser polishing of selective laser melted components Int. J. Mach. Tools Manuf.95 97–104

[209] [209] Tian Y T, Gora W S, Cabo A P, Parimi L L, Hand D P,Tammas-Williams S and Prangnell P B 2018 Material interactions in laser polishing powder bed additive manufactured Ti6Al4V components Addit. Manuf.20 11–22

[210] [210] Zhang D Q, Yu J, Li H, Zhou X, Song C H, Zhang C,Shen S N, Liu L Q and Dai C Y 2020 Investigation of laser polishing of four selective laser melting alloy samples Appl. Sci. 10 760

[211] [211] El Hassanin A, Obeidi M A, Scherillo F and Brabazon D 2021 CO2 laser polishing of laser-powder bed fusion produced AlSi10Mg parts Surf. Coat. Technol. 419 127291

[212] [212] Xu Z F, Ouyang W T, Liu Y F, Jiao J K, Liu Y Z and Zhang W W 2021 Effects of laser polishing on surface morphology and mechanical properties of additive manufactured TiAl components J. Manuf. Process.65 51–59

[213] [213] Ma C P, Guan Y C and Zhou W 2017 Laser polishing of additive manufactured Ti alloys Opt. Lasers Eng. 93 171–7

[214] [214] Chang C S, Chen T H, Li T C, Lin S L, Liu S H and Lin J F 2016 Influence of laser beam fluence on surface quality,microstructure, mechanical properties, and tribological results for laser polishing of SKD61 tool steel J. Mater.Process. Technol. 229 22–35

[215] [215] Li Y H, Arthanari S and Guan Y C 2019 Influence of laser surface melting on the properties of MB26 and AZ80 magnesium alloys Surf. Coat. Technol. 378 124964

[216] [216] Brenner A, R?ther L, Osbild M and Finger J 2020 Laser polishing using ultrashort pulse laser Proc. SPIE11268 112680

[217] [217] Li Y H, Zhang Z and Guan Y C 2020 Thermodynamics analysis and rapid solidification of laser polished Inconel 718 by selective laser melting Appl. Surf. Sci. 511 145423

[218] [218] Zhang X Z and Chen L 2020 Effects of laser scanning speed on surface roughness and mechanical properties of aluminum/Polylactic Acid (Al/PLA) composites parts fabricated by fused deposition modeling Polym. Test.91 106785

[219] [219] Niitsu K, Tayama Y, Kato T and Yan J W 2019 Laser recovery of grinding-induced subsurface damage in the edge and notch of a single-crystal silicon wafer Surf.Topogr. Metrol. Prop. 7 015013

[220] [220] Xiao J F, Huang W Q, Li T, Wu Y L, Chen X, Zhang J G and Xu J F 2022 Laser assisted surface conditioning of a residual pattern on single crystal silicon induced by ultra-precision cutting Opt. Mater. Express 12 1303–13

[221] [221] Krishnan A and Fang F Z 2019 Review on mechanism and process of surface polishing using lasers Front. Mech.Eng. 14 299–319

[222] [222] Rosa B, Mognol P and Hasco¨et J Y 2015 Laser polishing of additive laser manufacturing surfaces J. Laser Appl.27 S29102

[223] [223] Pfefferkorn F E, Duffie N A, Li X C, Vadali M and Ma C 2013 Improving surface finish in pulsed laser micro polishing using thermocapillary flow CIRP Ann.62 203–6

[224] [224] Temmler A, Pütsch O, Stollenwerk J, Willenborg E and Loosen P 2014 Optical set-up for dynamic superposition of three laser beams for structuring and polishing applications Opt. Express 22 1387–93

[225] [225] Nüsser C, S?ndker H and Willenborg E 2013 Pulsed laser micro polishing of metals using dual-beam technology Phys. Proc. 41 346–55

[226] [226] Zhang W X, Wong K, Morales M, Molpeceres C and Arnold C B 2020 Implications of using two low-power continuous-wave lasers for polishing Int. J. Extreme Manuf. 2 035101

[227] [227] Tadmor R 2009 Marangoni flow revisited J. Colloid Interfaces Sci. 332 451–4

[228] [228] Yunker P J, Still T, Lohr M A and Yodh A G 2011 Suppression of the coffee-ring effect by shape-dependent capillary interactions Nature 476 308–11

[229] [229] Ma C, Vadali M, Li X C, Duffie N A and Pfefferkorn F E 2014 Analytical and experimental investigation of thermocapillary flow in pulsed laser micropolishing J.Micro Nano-Manuf. 2 021010

[230] [230] Shen H, Pan Y Q, Zhou J and Yao Z Q 2017 Forming mechanism of bump shape in pulsed laser melting of stainless steel J. Heat Transf. 139 062301

[231] [231] Vadali M, Ma C, Duffie N A, Li X C and Pfefferkorn F E 2012 Pulsed laser micro polishing: surface prediction model J. Manuf. Process. 14 307–15

[232] [232] Perry T L, Werschmoeller D, Duffie N A, Li X C and Pfefferkorn F E 2009 Examination of selective pulsed laser micropolishing on microfabricated nickel samples using spatial frequency analysis J. Manuf. Sci. Eng. 131 021002

[233] [233] Jaritngam P, Tangwarodomnukun V, Qi H and Dumkum C 2020 Surface and subsurface characteristics of laser polished Ti6Al4V titanium alloy Opt. Laser Technol.126 106102

[234] [234] Doualle T, Gallais L, Cormont P, Hébert D, Combis P and Rullier J L 2016 Thermo-mechanical simulations of CO2 laser–fused silica interactions J. Appl. Phys. 119 113106

[235] [235] Chen C and Tsai H L 2018 Fundamental study of the bulge structure generated in laser polishing process Opt. Lasers Eng. 107 54–61

[236] [236] Zhang X H, Chen X X, Chen T, Ma G Y, Zhang W W and Huang L R 2022 Influence of pulse energy and defocus amount on the mechanism and surface characteristics of femtosecond laser polishing of SiC ceramics Micromachines 13 1118

[237] [237] Li K, Zhao Z Y, Zhou H M, Zhou H and Jin J C 2020 Numerical analyses of molten pool evolution in laser polishing Ti6Al4V J. Manuf. Process. 58 574–84

[238] [238] Heng L D, Kim Y J and Mun S D 2017 Review of superfinishing by the magnetic abrasive finishing process High Speed Mach. 3 42–55

[239] [239] Golini D, Dumas P, Kordonski W, Hogan S and Jacobs S 1998 Precision optics fabrication using magnetorheological finishing Proc. Optical Fabrication and Testing (Optica Publishing Group) pp 251–74

[240] [240] Mori T, Hirota K and Kawashima Y 2003 Clarification of magnetic abrasive finishing mechanism J. Mater. Process.Technol. 143–144 682–6

[241] [241] Shinmura T, Hatano E and Takazawa K 1986 The development of magnetic-abrasive finishing and its equipment by applying a rotating magnetic field Bull.JSME 29 4437–43

[242] [242] Chang G W, Yan B H and Hsu R T 2002 Study on cylindrical magnetic abrasive finishing using unbonded magnetic abrasives Int. J. Mach. Tools Manuf. 42 575–83

[243] [243] Yamaguchi H and Shinmura T 2004 Internal finishing process for alumina ceramic components by a magnetic field assisted finishing process Precis. Eng. 28 135–42

[244] [244] Kim T W, Kang D M and Kwak J S 2010 Application of magnetic abrasive polishing to composite materials J.Mech. Sci. Technol. 24 1029–34

[245] [245] Guo J, Kum C W, Au K H, Tan Z E, Wu H and Liu K 2016 New vibration-assisted magnetic abrasive polishing(VAMAP) method for microstructured surface finishing Opt. Express 24 13542–54

[246] [246] Ren K, Luo X, Zheng L G, Bai Y, Li L X, Hu H X and Zhang X J 2014 Belt-MRF for large aperture mirrors Opt. Express 22 19262–76

[247] [247] Wang D K, Hu H X, Li L X, Bai Y, Luo X, Xue D L and Zhang X J 2017 Effects of the gap slope on the distribution of removal rate in Belt-MRF Opt. Express 25 26600–14

[248] [248] Yin S H, Wang Y Q, Deng G J, Luo H, Chen F J and Lu Z C 2013 Effects of permanent magnet excitation on material removal rate in area taking magnetorhelogical finishing Adv. Mater. Res. 797 401–4

[249] [249] Luo H, Guo M J, Yin S H, Chen F J, Huang S, Lu A G and Guo Y F 2018 An atomic-scale and high efficiency finishing method of zirconia ceramics by using magnetorheological finishing Appl. Surf. Sci.444 569–77

[250] [250] Pan J S and Yan Q S 2015 Material removal mechanism of cluster magnetorheological effect in plane polishing Int. J.Adv. Manuf. Technol. 81 2017–26

[251] [251] Pan J S, Guo M L, Yan Q S, Zheng K and Xiao X L 2019 Research on material removal model and processing parameters of cluster magnetorheological finishing with dynamic magnetic fields Int. J. Adv. Manuf. Technol.100 2283–97

[252] [252] Singh A K, Jha S and Pandey P M 2012 Nanofinishing of fused silica glass using ball-end magnetorheological finishing tool Mater. Manuf. Process. 27 1139–44

[253] [253] Bedi T S and Singh A K 2018 A new magnetorheological finishing process for ferromagnetic cylindrical honed surfaces Mater. Manuf. Process. 33 1141–9

[254] [254] Kim D W, Cho M W, Seo T I and Shin Y J 2008 Experimental study on the effects of alumina abrasive particle behavior in MR polishing for MEMS applications Sensors 8 222–35

[255] [255] Yin S H, Cheng Z Y, Xu Z Q, Chen F J and Yu J W 2012 Experimental study on polishing properties of silicone oil based magnetic compound fluid Adv. Mater. Res.565 273–7

[256] [256] Zhang F H, Wang H J, Liu J F, Luan D R and Zhang Y 2009 Study on the surface quality of optical glass in ultrasonic-magnetorheological compound finishing Key Eng. Mater. 389–390 181–6

[257] [257] Zhai Q, Zhai W J, Gao B, Shi Y Q and Cheng X 2021 Synthesis and characterization of nanocomposite Fe3O4/SiO2 core–shell abrasives for high-efficiency ultrasound-assisted magneto-rheological polishing of sapphire Ceram. Int. 47 31681–90

[258] [258] Yan J W, Pan J S, Yan Q S, Zhou R and Wu Y S 2023 Controllable electrochemical-magnetorheological finishing of single-crystal gallium nitride wafers J. Solid State Electr. 27 597–610

[259] [259] Wang Y Q, Yin S H, Huang H, Chen F J and Deng G J 2015 Magnetorheological polishing using a permanent magnetic yoke with straight air gap for ultra-smooth surface planarization Precis. Eng. 40 309–17

[260] [260] Hong K P, Cho Y K, Shin B C, Cho M W, Choi S B,Cho W S and Jae J J 2012 Magnetorheological (MR) polishing of alumina-reinforced zirconia ceramics using diamond abrasives for dental application Mater. Manuf.Process. 27 1135–8

[261] [261] Townsend P D 1970 Ion beams in optics-an introduction Opt.Technol. 2 65–67

[262] [262] Drueding T W, Bifano T G and Fawcett S C 1995 Contouring algorithm for ion figuring Precis. Eng. 17 10–21

[263] [263] Yuan Z, Dai Y F, Xie X H and Zhou L 2012 Ion beam figuring system for ultra-precise optics Key Eng. Mater.516 19–24

[264] [264] Bauer J, Frost F and Arnold T 2017 Reactive ion beam figuring of optical aluminium surfaces J. Phys. D: Appl.Phys. 50 085101

[265] [265] Yuan Z, Dai Y F, Yu H, Xie X H and Zhou L 2011 Control of thermal effect in ion beam figuring process based on low-pass filtering Appl. Mech. Mater. 120 360–5

[266] [266] Li F R, Xie X H, Tie G P, Hu H and Zhou L 2017 Figuring process of potassium dihydrogen phosphate crystal using ion beam figuring technology Appl. Opt. 56 7130–7

[267] [267] Zhou L, Dai Y F, Xie X H and Li S Y 2015 Obliquely incident ion beam figuring Opt. Eng. 54 105101

[268] [268] Li X J, Wang D S, Nie F M, Wu P F and Zhao S Y 2021 Research on removal function and ion beam figuring process for ultra-precision manufacturing optical components Proc. SPIE 12073 120730L

[269] [269] Zhang Z P, Xie X H, Zhou L, Lu Y and Dai Z C 2017 The research on material removal characteristic of reactive ion beam figuring for optics mirrors Proc. SPIE10460 104600Z

[270] [270] H?nsel T, Frost F, Nickel A and Schindler T 2007 Ultra-precision surface finishing by ion beam techniques Vak. Forsch. Prax. 19 24–30

[271] [271] Kim Y H, Lee S K and Kim H J 2000 Low-k Si-O-C-H composite films prepared by plasma-enhanced chemical vapor deposition using bis-trimethylsilylmethane precursor J. Vac. Sci. Technol. A 18 1216–9

[272] [272] Levinson J A, Shaqfeh E S G, Balooch M and Hamza A V 2000 Ion-assisted etching and profile development of silicon in molecular and atomic chlorine J. Vac. Sci.Technol. B 18 172–90

[273] [273] Tendero C, Tixier C, Tristant P, Desmaison J and Leprince P 2006 Atmospheric pressure plasmas: a review Spectrochim. Acta B 61 2–30

[274] [274] Tanaka Y 2021 Recent development of new inductively coupled thermal plasmas for materials processing Adv.Phys. X 6 1867637

[275] [275] Ji P, Li D, Su X, Qiao Z, Wu K J, Song L, Peng B and Wang B 2020 Optimization strategy for the velocity distribution based on tool influence function non-linearity in atmospheric pressure plasma processing Precis. Eng.65 269–78

[276] [276] Li R L, Zhang Y J, Zhang Y, Liu W, Li Y G and Deng H 2020 Plasma-based isotropic etching polishing of synthetic quartz J. Manuf. Process. 60 447–56

[277] [277] Deng T T, Li J J, Zheng Z Z, Tian W and Li G L 2022 Influence of plasma beam polishing process parameters on surface roughness of AISI 304 stainless steel Appl. Surf.Sci. 585 152741

[278] [278] Tovstopyat A, Gafarov I, Galeev V, Azarova V and Golyaeva A 2018 Modification of the surface properties of glass-ceramic materials at low-pressure RF plasma stream Phys. Plasmas 25 053508

[279] [279] Ji P, Jin H L, Li D, Su X, Liu K and Wang B 2019 Thermal modelling for conformal polishing in inductively coupled atmospheric pressure plasma processing Optik 182 415–23

[280] [280] Arnold T, Boehm G and Paetzelt H 2017 Precision asphere and freeform optics manufacturing using plasma jet machining technology Proc. SPIE 10448 1044814

[281] [281] Su X, Ji P, Jin Y, Li D, Qiao Z, Ding F, Yue X B and Wang B 2021 Freeform surface generation by atmospheric pressure plasma processing using a time-variant influence function Opt. Express 29 11479–93

[282] [282] Takino H, Shibata N, Itoh H, Kobayashi T, Yamamura K,Sano Y and Mori Y 2002 Fabrication of optics by use of plasma chemical vaporization machining with a pipe electrode Appl. Opt. 41 3971–7

[283] [283] Li D, Li N, Su X, Liu K, Ji P and Wang B 2019 Characterization of fused silica surface topography in (VAMAP) method for microstructured surface finishing Opt. Express 24 13542–54

[284] [284] Ren K, Luo X, Zheng L G, Bai Y, Li L X, Hu H X and Zhang X J 2014 Belt-MRF for large aperture mirrors Opt.Express 22 19262–76

[285] [285] Wang D K, Hu H X, Li L X, Bai Y, Luo X, Xue D L and Zhang X J 2017 Effects of the gap slope on the distribution of removal rate in Belt-MRF Opt. Express 25 26600–14

[286] [286] Yin S H, Wang Y Q, Deng G J, Luo H, Chen F J and Lu Z C 2013 Effects of permanent magnet excitation on material removal rate in area taking magnetorhelogical finishing Adv. Mater. Res. 797 401–4

[287] [287] Luo H, Guo M J, Yin S H, Chen F J, Huang S, Lu A G and Guo Y F 2018 An atomic-scale and high efficiency finishing method of zirconia ceramics by using magnetorheological finishing Appl. Surf. Sci.444 569–77

[288] [288] Pan J S and Yan Q S 2015 Material removal mechanism of cluster magnetorheological effect in plane polishing Int. J.Adv. Manuf. Technol. 81 2017–26

[289] [289] Pan J S, Guo M L, Yan Q S, Zheng K and Xiao X L 2019 Research on material removal model and processing parameters of cluster magnetorheological finishing with dynamic magnetic fields Int. J. Adv. Manuf. Technol.100 2283–97

[290] [290] Singh A K, Jha S and Pandey P M 2012 Nanofinishing of fused silica glass using ball-end magnetorheological finishing tool Mater. Manuf. Process. 27 1139–44

[291] [291] Bedi T S and Singh A K 2018 A new magnetorheological finishing process for ferromagnetic cylindrical honed surfaces Mater. Manuf. Process. 33 1141–9

[292] [292] Kim D W, Cho M W, Seo T I and Shin Y J 2008 Experimental study on the effects of alumina abrasive particle behavior in MR polishing for MEMS applications Sensors 8 222–35

[293] [293] Yin S H, Cheng Z Y, Xu Z Q, Chen F J and Yu J W 2012 Experimental study on polishing properties of silicone oil based magnetic compound fluid Adv. Mater. Res.565 273–7

[294] [294] Zhang F H, Wang H J, Liu J F, Luan D R and Zhang Y 2009 Study on the surface quality of optical glass in ultrasonic-magnetorheological compound finishing Key Eng. Mater. 389–390 181–6

[295] [295] Zhai Q, Zhai W J, Gao B, Shi Y Q and Cheng X 2021 Synthesis and characterization of nanocomposite Fe3O4/SiO2 core–shell abrasives for high-efficiency ultrasound-assisted magneto-rheological polishing of sapphire Ceram. Int. 47 31681–90

[296] [296] Yan J W, Pan J S, Yan Q S, Zhou R and Wu Y S 2023 Controllable electrochemical-magnetorheological finishing of single-crystal gallium nitride wafers J. Solid State Electr. 27 597–610

[297] [297] Wang Y Q, Yin S H, Huang H, Chen F J and Deng G J 2015 Magnetorheological polishing using a permanent magnetic yoke with straight air gap for ultra-smooth surface planarization Precis. Eng. 40 309–17

[298] [298] Hong K P, Cho Y K, Shin B C, Cho M W, Choi S B,Cho W S and Jae J J 2012 Magnetorheological (MR) polishing of alumina-reinforced zirconia ceramics using diamond abrasives for dental application Mater. Manuf.Process. 27 1135–8

[299] [299] Townsend P D 1970 Ion beams in optics-an introduction Opt.Technol. 2 65–67

[300] [300] Drueding T W, Bifano T G and Fawcett S C 1995 Contouring algorithm for ion figuring Precis. Eng. 17 10–21

[301] [301] Yuan Z, Dai Y F, Xie X H and Zhou L 2012 Ion beam figuring system for ultra-precise optics Key Eng. Mater.516 19–24

[302] [302] Bauer J, Frost F and Arnold T 2017 Reactive ion beam figuring of optical aluminium surfaces J. Phys. D: Appl.Phys. 50 085101

[303] [303] Yuan Z, Dai Y F, Yu H, Xie X H and Zhou L 2011 Control of thermal effect in ion beam figuring process based on low-pass filtering Appl. Mech. Mater. 120 360–5

[304] [304] Li F R, Xie X H, Tie G P, Hu H and Zhou L 2017 Figuring process of potassium dihydrogen phosphate crystal using ion beam figuring technology Appl. Opt. 56 7130–7

[305] [305] Zhou L, Dai Y F, Xie X H and Li S Y 2015 Obliquely incident ion beam figuring Opt. Eng. 54 105101

[306] [306] Li X J, Wang D S, Nie F M, Wu P F and Zhao S Y 2021 Research on removal function and ion beam figuring process for ultra-precision manufacturing optical components Proc. SPIE 12073 120730L

[307] [307] Zhang Z P, Xie X H, Zhou L, Lu Y and Dai Z C 2017 The research on material removal characteristic of reactive ion beam figuring for optics mirrors Proc. SPIE 10460 104600Z

[308] [308] H?nsel T, Frost F, Nickel A and Schindler T 2007 Ultra-precision surface finishing by ion beam techniques Vak. Forsch. Prax. 19 24–30

[309] [309] Kim Y H, Lee S K and Kim H J 2000 Low-k Si-O-C-H composite films prepared by plasma-enhanced chemical vapor deposition using bis-trimethylsilylmethane precursor J. Vac. Sci. Technol. A 18 1216–9

[310] [310] Levinson J A, Shaqfeh E S G, Balooch M and Hamza A V 2000 Ion-assisted etching and profile development of silicon in molecular and atomic chlorine J. Vac. Sci.Technol. B 18 172–90

[311] [311] Tendero C, Tixier C, Tristant P, Desmaison J and Leprince P 2006 Atmospheric pressure plasmas: a review Spectrochim. Acta B 61 2–30

[312] [312] Tanaka Y 2021 Recent development of new inductively coupled thermal plasmas for materials processing Adv.Phys. X 6 1867637

[313] [313] Ji P, Li D, Su X, Qiao Z, Wu K J, Song L, Peng B and Wang B 2020 Optimization strategy for the velocity distribution based on tool influence function non-linearity in atmospheric pressure plasma processing Precis. Eng.65 269–78

[314] [314] Li R L, Zhang Y J, Zhang Y, Liu W, Li Y G and Deng H 2020 Plasma-based isotropic etching polishing of synthetic quartz J. Manuf. Process. 60 447–56

[315] [315] Deng T T, Li J J, Zheng Z Z, Tian W and Li G L 2022 Influence of plasma beam polishing process parameters on surface roughness of AISI 304 stainless steel Appl. Surf.Sci. 585 152741

[316] [316] Tovstopyat A, Gafarov I, Galeev V, Azarova V and Golyaeva A 2018 Modification of the surface properties of glass-ceramic materials at low-pressure RF plasma stream Phys. Plasmas 25 053508

[317] [317] Ji P, Jin H L, Li D, Su X, Liu K and Wang B 2019 Thermal modelling for conformal polishing in inductively coupled atmospheric pressure plasma processing Optik 182 415–23

[318] [318] Arnold T, Boehm G and Paetzelt H 2017 Precision asphere and freeform optics manufacturing using plasma jet machining technology Proc. SPIE 10448 1044814

[319] [319] Su X, Ji P, Jin Y, Li D, Qiao Z, Ding F, Yue X B and Wang B 2021 Freeform surface generation by atmospheric pressure plasma processing using a time-variant influence function Opt. Express 29 11479–93

[320] [320] Takino H, Shibata N, Itoh H, Kobayashi T, Yamamura K,Sano Y and Mori Y 2002 Fabrication of optics by use of plasma chemical vaporization machining with a pipe electrode Appl. Opt. 41 3971–7

[321] [321] Li D, Li N, Su X, Liu K, Ji P and Wang B 2019 Characterization of fused silica surface topography in