[1] Shen J Z. Acoustic imaging and its application in NDT[J]. Nondestructive Testing Technologying, 16, 202-206(1994).

[2] Fink M. Time reversal of ultrasonic fields. I. basic principles[J]. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 39, 555-566(1992).

[3] Prada C, Fink M. Eigenmodes of the time reversal operator: a solution to selective focusing in multiple-target media[J]. Wave Motion, 20, 151-163(1994).

[4] Prada C, Manneville S, Spoliansky D et al. Decomposition of the time reversal operator: detection and selective focusing on two scatterers[J]. The Journal of the Acoustical Society of America, 99, 2067-2076(1996).

[5] Devaney A J, Marengo E A, Gruber F K. Time-reversal-based imaging and inverse scattering of multiply scattering point targets[J]. The Journal of the Acoustical Society of America, 118, 3129-3138(2005).

[6] Wang C H, Wei W. Distinguishing between target and interface in ultrasonic detection by a modified time reversal method[J]. Acta Acustica, 27, 193-197(2002).

[7] Deng F, Hu F C, Zhang X. Imaging small damages in plates using DORT processing[J]. Journal of Beijing University of Technology, 44, 743-748(2018).

[8] Li C X, Guo M F, Wang Z K. Wideband imaging of extended targets with the decomposition of the time reversal operator[J]. Acta Acustica, 43, 145-153(2018).

[9] Li Z, Zhao Y L, Wang S F. New method of magnifying defect echo based on time reversal focusing[J]. Chinese Journal of Scientific Instrument, 39, 154-161(2018).

[10] Sabra K G, Dowling D R. Effect of ocean currents on the performance of a time-reversing array in shallow water[J]. The Journal of the Acoustical Society of America, 114, 3125-3135(2003).

[11] Liu S P, Liu F F, Shi J W et al. High-resolution ultrasonic imaging evaluation and behavior analysis of impact damages in composites[J]. Journal of Mechanical Engineering, 49, 16-23(2013).

[12] Li J Y, Shen Z H, Ni X W et al. Laser-ultrasonic non-destructive detection based on synthetic aperture focusing technique[J]. Chinese Journal of Lasers, 45, 0904003(2018).

[13] Pan L, Dong S Y, Xu B S et al. The review of study and application of phased array ultrasonic testing technology[J]. Nondestructive Testing Technologying, 35, 26-29(2013).

[14] Simonetti F. Localization of pointlike scatterers in solids with subwavelength resolution[J]. Applied Physics Letters, 89, 094105(2006).

[15] Kim S Y, Kim K, Hong K et al. Investigation of metal peel-off technique for the fabrication of flexible organic light-emitting diodes[J]. Journal of the Electrochemical Society, 156, J253(2009).

[16] Song Y K, Wang X K, Hua L. Research on ultrasonic test and reconstruction method of the internal defects in shaft parts[J]. Journal of Applied Acoustics, 35, 109-115(2016).

[17] Melde K, Mark A G, Qiu T et al. Holograms for acoustics[J]. Nature, 537, 518-522(2016).

[18] Janjic J, Kruizinga P, van der Meulen P et al. Structured ultrasound microscopy[J]. Applied Physics Letters, 112, 251901(2018).

[19] Xu Q. Study on beamforming algorithm of ultrasound imaging[D], 41-51(2012).

[20] Nilsen C I C, Hafizovic I. Beamspace adaptive beamforming for ultrasound imaging[J]. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 56, 2187-2197(2009).

[21] Hwang Y S, Hong S H, Javidi B. Free view 3-D visualization of occluded objects by using computational synthetic aperture integral imaging[J]. Journal of Display Technology, 3, 64-70(2007).

[22] Holmes C, Drinkwater B W, Wilcox P D. Post-processing of the full matrix of ultrasonic transmit-receive array data for non-destructive evaluation[J]. NDT & E International, 38, 701-711(2005).

[23] Li Y Q, Xia M Y. Time reversal imaging based on synchronism[J]. IEEE Antennas and Wireless Propagation Letters, 16, 2058-2061(2017).

[24] Asgedom E G, Gelius L J, Austeng A et al. Time-reversal multiple signal classification in case of noise: a phase-coherent approach[J]. The Journal of the Acoustical Society of America, 130, 2024-2034(2011).

[25] Labyed Y, Huang L J. Detecting small targets using windowed time-reversal MUSIC imaging: a phantom study[C], 1579-1582(2011).

[26] Kang W X, Li H F. Improvement of time reversal focusing algorithm based on wavelet packet analysis[J]. Applied Science and Technology, 45, 47-52(2018).

[27] Miao X T, Li F C, Meng G. Identification of multi-defects by combining time-reversal lamb waves with weight distribution imaging algorithm[J]. Journal of Mechanical Engineering, 47, 1-8(2011).

[28] Ai C A, Cai X F, Li J et al. Dry-coupled ultrasonic detection of solid rocket motor by time reversal method[J]. Journal of Harbin Institute of Technology, 49, 145-150(2017).

[29] Fan C G, Yang L, Zhao Y et al. A generalized time-reversal-based imaging for ultrasonic nondestructive evaluation[C], 8-12(2017).

[30] Shan H B, Li M, Chen H D et al. The development of overseas simulation software for ultrasonic testing[J]. Nondestructive Testing Technologying, 30, 446-450(2008).

[31] Treeby B E, Cox B T. K-Wave: MATLAB toolbox for the simulation and reconstruction of photoacoustic wave fields[J]. Journal of Biomedical Optics, 15, 021314(2010).

[32] Jensen J A. Field: a program for simulating ultrasound systems[J]. Medical & Biological Engineering & Computing, 34, 351-352(1996).

[33] Mair H D, Ciorau P, Owen D et al. Ultrasonic simulation: imagine3D and SimScan: tools to solve the inverse problem for complex turbine components[J]. AIP Conference Proceedings, 509, 911-918(2000).

[34] Calmon P, Mahaut S, Chatillon S et al. CIVA: an expertise platform for simulation and processing NDT data[J]. Ultrasonics, 44, e975-e979(2006).

[35] Liu Z H, Jia J W, Xiong G. Research of the design and simulation of ultrasonic focusing system with phased array[J]. Applied Mechanics and Materials, 620, 162-165(2014).

[36] Kažys R, Demčenko A, Žukauskas E et al. Air-coupled ultrasonic investigation of multi-layered composite materials[J]. Ultrasonics, 44, e819-e822(2006).

[37] Wang S J, Kang L, Li Z C et al. 3-D modeling and analysis of meander-line-coil surface wave EMATs[J]. Mechatronics, 22, 653-660(2012).

[38] Li Y B, Han Y, Yang G et al. Weak defect enhancement in ultrasonic testing of laser deposition manufactured TA15 alloys[J]. Chinese Journal of Lasers, 45, 0504002(2018).

[39] Ohara Y, Kawashima K. Detection of internal micro defects by nonlinear resonant ultrasonic method using water immersion[J]. Japanese Journal of Applied Physics, 43, 3119-3120(2004).

[40] Shen Z H, Yuan L, Zhang H C[M]. Laser ultrasound in solids, 31-38(2015).

[41] Zhang S Y. Laser ultrasound and nondestructive evaluation of materials[J]. Applied Acoustics, 11, 1-6(1992).

[42] Qian M L. Progress in laser ultrasonics[J]. Technical Acoustics, 21, 19-24(2002).

[43] Zhu H L, Liu C, Zhang B et al. Research on laser ultrasonic visual image processing[J]. Chinese Journal of Lasers, 45, 0104004(2018).

[44] Zhu Q, Qiu J H, Zhang C et al. Application of laser ultrasonic detection method for double-layer laminated material[J]. Laser & Optoelectronics Progress, 53, 031402(2016).

[45] Yang L J, Li Y, Sun J J et al. Reflection and transmission of laser ultrasonic waves on surface defects[J]. Laser & Optoelectronics Progress, 56, 041203(2019).

[46] Cao J S, Cao Z, Zhao L F et al. Detecting techniques of surface crack of pipeline based on laser ultrasonic[J]. Opto-Electronic Engineering, 43, 1-6(2016).

[47] Guo H Y, Xu Z X, Liu Z Y et al. Laser ultrasonic test for defects of metal plate with coating[J]. Laser & Infrared, 47, 541-547(2017).

[48] Liu Y, Xiang Z Q, Tang Z F. Application of laser-induced ultrasound on rail flaw inspection[J]. Machinery Design & Manufacture, 60-61(2009).

[49] Chen L, Liu X, Zhan C et al. Measurement of elastic constants of metal foils by laser ultrasonic method[J]. Chinese Journal of Lasers, 47, 1104003(2020).

[50] Feng W W, Pan Y D, Ru D H et al. Residual stress in cast iron brake disc measured by laser-generated surface wave technique[J]. Materials for Mechanical Engineering, 42, 78-82(2018).

[51] Pang J C, Yan X L. Ultrasonic nondestructive testing of residual stress in parts formed by laser 3D printing[J]. Manufacturing Technology & Machine Tool, 106-111(2020).

[52] Tao C, Yin A M, Ying Z Q et al. Numerical simulation of ultrasonic velocity at high temperature based on laser ultrasonic[J]. Laser & Infrared, 48, 815-820(2018).

[53] Zhao W L, Li C, Wu T. Laser ultrasonic inspection of weld defects in oil and gas pipelines[J]. Laser Journal, 38, 24-27(2017).

[54] Li P, Zhao Y, Bai X et al. A review of ultrasonic methods used for nondestructive characterization of polycrystalline materials[J]. Applied Physics, 9, 429-441(2019).

[55] Li P, Zhao Y, Zhou Z Q et al. Research on laser induced acoustic detection of trans-media aerial underwater[J]. Infrared and Laser Engineering, 50, 55-63(2021).

[56] Kenderian S, Cerniglia D, Djordjevic B B et al. Laser-air hybrid ultrasonic technique for dynamic railroad inspection applications[J]. Insight-Non-Destructive Testing and Condition Monitoring, 47, 336-340(2005).

[57] Dixon S, Burrows S E, Dutton B et al. Detection of cracks in metal sheets using pulsed laser generated ultrasound and EMAT detection[J]. Ultrasonics, 51, 7-16(2011).

[58] Zhao Y, Guo R, Song J F et al. Noncontact nondestructive detection of inner metal defects based on laser-EMAT technique[J]. Laser Technology, 37, 277-280(2013).

[59] Gu Y H, Zhang Z Z, Gao X H et al. Application of nondestructive detection of aluminum using laser ultrasonic technology and EMAT method[J]. Chinese Journal of Lasers, 47, 0504002(2020).

[60] Ding X S, Chen K Y. The development of six-axis immersion C-scan automatic imaging system[J]. Mechanical & Electrical Engineering Technology, 43, 37-39, 98(2014).

[61] Chen L, Luo Z L, Liu X J et al. Applications of the laser ultrasonic visualizing technology in nondestructive testing[C], 135-139(2014).