[1] Zhang P L, Liu X P, Lu Y L et al. Microstructure and wear behavior of Cu-Mo-Si coatings by laser cladding[J]. Applied Surface Science, 311, 709-714(2014). http://www.sciencedirect.com/science/article/pii/S0169433214011817?np=y

[2] Liu Xiaopeng, Zhang Peilei, Lu Yunlong et al. Study on tribological properties of Ni-based silicide coating on copper by laser cladding[J]. Chinese J Lasers, 42, 0906005(2015).

[3] Fang Liuyang, Yao Yansong, Yan Hua et al. TiB2 reinforced Ni-based gradient coating on copper alloy surface by laser cladding[J]. Chinese J Lasers, 44, 0802001(2017).

[4] Zhang P L, Yu Z S et al. . Development and characterization of laser surface cladding (Ti,W) C reinforced Ni-30Cu alloy composite coating on copper[J]. Optics and Laser Technology, 44, 1351-1358(2012). http://www.sciencedirect.com/science/article/pii/S0030399211004312

[5] Petrovic J J, Vasudevan A K. Key developments in high temperature structural silicides[J]. Materials Science and Engineering A, 261, 1-5(1999). http://www.sciencedirect.com/science/article/pii/S0921509398010430

[6] Sheng W, Liu D, Wang H M. Microstructure and high-temperature wear behavior of laser clad Ni-Ti-Si ternary metal silicide coatings[J]. Surface and Coatings Technology, 202, 2871-2877(2008). http://www.sciencedirect.com/science/article/pii/S0257897207010638

[7] Zhang Y Z, Tu Y, Xi M Z et al. Characterization on laser clad nickel based alloy coating on pure copper[J]. Surface and Coatings Technology, 202, 5924-5928(2008). http://www.sciencedirect.com/science/article/pii/S0257897208006051

[8] Dehm G, Medres B, Shepeleva L et al. Microstructure and tribological properties of Ni-based claddings on Cu substrates[J]. Wear, 225, 18-26(1999). http://www.sciencedirect.com/science/article/pii/S0043164898003470

[9] Ng K W, Man H C, Cheng F T et al. Laser cladding of copper with molybdenum for wear resistance enhancement in electrical contacts[J]. Applied Surface Science, 253, 6236-6241(2007). http://www.sciencedirect.com/science/article/pii/S0169433207001419

[10] Liu Y F, Zhou Y L, Zhang Q et al. Microstructure and dry sliding wear behavior of plasma transferred arc clad Ti5Si3 reinforced intermetallic composite coatings[J]. Journal of Alloys and Compounds, 591, 251-258(2014). http://www.sciencedirect.com/science/article/pii/S0925838813032271

[11] Wu Y, Wang A H, Zhang Z. Laser alloying of Ti-Si compound coating on Ti-6Al-4V alloy for the improvement of bioactivity[J]. Applied Surface Science, 305, 16-23(2014). http://www.sciencedirect.com/science/article/pii/S0169433214004553

[12] He P, Liu D. Mechanism of forming interfacial intermetallic compounds at interface for solid state diffusion bonding of dissimilar materials[J]. Materials Science and Engineering A, 437, 430-435(2006). http://www.sciencedirect.com/science/article/pii/S0921509306017515

[13] Guan Q L, Wang H Y, Li S L et al. Microstructure characteristics of products in Ti-Si system via combustion synthesis reaction[J]. Journal of Materials and Science, 44, 1902-1908(2009). http://link.springer.com/article/10.1007/s10853-009-3289-y

[14] Du Y J, Rao K P. Chung J C Y, et al. Phase transitions in reactive formation of Ti5Si3/TiAl in situ composites[J]. Metallurgical and Materials Transactions A, 31, 763-771(2000).

[15] Mittal R C, Si S K, Gupta K P et al. Si-stabilized C-14 laves phases in transition-metal systems[J]. Journal of the Less Common Metals, 60, 75-82(1978). http://www.sciencedirect.com/science/article/pii/0022508878900917

[16] Yan X L, Chen X Q, Grytsiv A et al. On the ternary laves phases {Sc, Ti}2M3Si(M=Cr, Mn, Fe, Co, Ni) with MgZn2-type[J]. Journal of Alloys and Compounds, 429, 10-18(2007). http://onlinelibrary.wiley.com/doi/10.1002/chin.200719005/full

[17] Dong L X, Wang H M. Microstructure and corrosion properties of laser-melted deposited Ti2Ni3Si/NiTi intermetallic alloy[J]. Journal of Alloys and Compounds, 465, 83-89(2008). http://www.sciencedirect.com/science/article/pii/S0925838807020178

[18] Hiraga H, Inoue T, Shimura H et al. Cavitation erosion mechanism of NiTi coatings made by laser plasma hybrid spraying[J]. Wear, 231, 272-278(1999). http://www.sciencedirect.com/science/article/pii/S0043164899001337

[19] Liu X B, Wang H M. Microstructure, wear and high-temperature oxidation resistance of laser clad Ti5Si3/γ/TiSi composite coatings on γ-TiAl intermetallic alloy[J]. Surface and Coatings Technology, 200, 4462-4470(2006).

[20] Fei G, Wang H M. Abrasive wear property of laser melting/deposited Ti2Ni/TiNi intermetallic alloy[J]. Transactions of Nonferrous Metals Society of China, 17, 1358-1362(2007). http://d.wanfangdata.com.cn/Periodical/zgysjsxb-e200706041

[21] Dong Y J, Wang H M. Microstructure and dry sliding wear resistance of laser clad TiC reinforced Ti-Ni-Si intermetallic composite coating[J]. Surface and Coatings Technology, 204, 731-735(2009). http://www.sciencedirect.com/science/article/pii/S0257897209007233

[22] Liu Yuanfu, Zhao Haiyun, Wang Huaming. Microstructure and wear resistance of laser clad Ti5Si3/NiTi2 intermetallic wear resistant composite coating[J]. Chinese Journal of Material Research, 16, 313-318(2002).