[1] Bai L, Zhao Z G, Gong H B et al[J]. Development of laser forming technology for titanium alloy aircraft structure Aeronautical Manufacturing Technology, 2013, 40-44.

[2] Wang H M, Zhang S Q, Tang H B et al. Research progress of laser rapid prototyping technology for large titanium alloy structures[J]. Aviation Precision Manufacturing Technology, 44, 28-30(2008).

[3] Chen J, Yang H O, Yang J et al. Laser rapid prototyping characteristics and fused structure of TC4 titanium alloy[J]. Rare Metals Letters, 23, 33-37(2004).

[4] Yang J, Huang W D, Chen J et al[J]. Mechanical proper ty of Ti alloy TC4 laser rapid forming Aeronautical Manufacturing Technology, 2007, 73-76.

[5] Zhang F Y, Chen J, Tan H et al. Research on forming mechanism of defects in laser rapid formed titanium alloy[J]. Rare Metal Materials and Engineering, 36, 211-215(2007).

[6] You L. Investigation on preparation of Ti-8LC and Ti-12LC alloys by electro-deoxidation of metal oxides in the molten salt[D]. Shenyang: Northeastern University(2012).

[7] Zhu J, Kamiya A, Yamada T et al. Influence of boron addition on microstructure and mechanical properties of dental cast titanium alloys[J]. Materials Science and Engineering A, 339, 53-62(2003). http://www.sciencedirect.com/science/article/pii/S0921509302001028

[8] Huang L G, Chen Y Y. Research progress of effects of boron on formability and mechanical properties of titanium alloys[J]. Materials for Mechanical Engineering, 40, 8-13(2016).

[9] Bermingham M J, Kent D, Zhan H et al. Controlling the microstructure and properties of wire arc additive manufactured Ti-6Al-4V with trace boron additions[J]. Acta Materialia, 91, 289-303(2015). http://www.sciencedirect.com/science/article/pii/S1359645415002025

[10] Brandl E, Schoberth A, Leyens C. Morphology, microstructure, and hardness of titanium (Ti-6Al-4V) blocks deposited by wire-feed additive layer manufacturing (ALM)[J]. Materials Science and Engineering A, 532, 295-307(2012). http://www.sciencedirect.com/science/article/pii/S092150931101197X

[11] Kobryn P A, Semiatin S L. The laser additive manufacture of Ti-6Al-4V[J]. JOM, 53, 40-42(2001). http://www.emeraldinsight.com/servlet/linkout?suffix=b96&dbid=16&doi=10.1108%2F13552540910979785&key=10.1007%2Fs11837-001-0068-x

[12] Baufeld B. Van der Biest O, Gault R. Additive manufacturing of Ti-6Al-4V components by shaped metal deposition: Microstructure and mechanical properties[J]. Materials & Design, 31, 106-111(2010).

[13] Li D, Zhao Y Q. The development of grain refinement for titanium alloy[J]. Materials Review, 19, 421-422(2005).

[14] Qian Y H, Tan H, Li J et al. Microstructure characterization of laser solid forming Ti-6Al-4V alloy by high power[J]. Rare Metal Materials and Engineering, 43, 2162-2166(2014).

[15] Shi B F, Zhang A F, Qi B L et al. Influence of heat accumulation on microstructure and property of Ti-6Al-4V in laser direct forming[J]. Laser Technology, 40, 29-32(2016).

[16] Wang M, Guo H Z. Study on superplasticity and fine-grained of TC4 alloy[J]. Journal of Plasticity Engineering, 15, 155-158(2008).

[17] Luo H, Chen Z Q. Progress in boron-modified titanium alloys[J]. Development and Application of Materials, 25, 77-81(2010).

[18] Genç A, Banerjee R, Hill D et al. Structure of TiB precipitates in laser deposited in situ, Ti-6Al-4V-TiB composites[J]. Materials Letters, 60, 859-863(2006). http://www.sciencedirect.com/science/article/pii/S0167577X05009973

[19] Wang F, Mei J, Wu X H. Direct laser fabrication of Ti6Al4V/TiB[J]. Journal of Materials Processing Technology, 195, 321-326(2008). http://www.sciencedirect.com/science/article/pii/S0924013607005298

[20] Lin X, Li Y M, Wang M et al. Columnar to equiaxed transition during alloy solidification[J]. Science in China Series E, 46, 475-489(2003). http://link.springer.com/article/10.1360/02ye0337

[21] Liang S D, Zhang A F, Wang T et al. Elimination of laser direct forming crack on DD4 parts by induction heating[J]. Chinese Journal of Lasers, 44, 0202003(2017).