[1] [1] ZHOU S F, LEI J B, DAI X Q, et al. A comparative study of the structure and wear resistance of NiCrBSi/50 wt.% WC composite coatings by laser cladding and laser induction hybrid cladding［J］. International Journal of Refractory Metals and Hard Materials, 2016, 60: 17-27.

[2] [2] SALONITIS K, D’ALVISE L, SCHOINOCHORITIS B, et al. Additive manufacturing and post-processing simulation: laser cladding followed by high speed machining［J］. The International Journal of Advanced Manufacturing Technology, 2016, 85(9-12): 2401-2411.

[3] [3] CHAKRABORTY S S, DUTTA S. Estimation of dilution in laser cladding based on energy balance approach using regression analysis［J］. Sādhanā, 2019, 44(6): 1-6.

[4] [4] COURBON C, SOVA A, VALIORGUE F, et al. Near surface transformations of stainless steel cold spray and laser cladding deposits after turning and ball-burnishing［J］. Surface and Coatings Technology, 2019,371:235-244.

[5] [5] LIU J L, YU H J, CHEN C Z, et al. Research and development status of laser cladding on magnesium alloys: A review［J］. Optics and Lasers in Engineering, 2017, 93: 195-210.

[6] [6] KOVALEV O B, BEDENKO D V, ZAITSEV A V. Development and application of laser cladding modeling technique: From coaxial powder feeding to surface deposition and bead formation［J］. Applied Mathematical Modelling, 2018, 57: 339-359.

[7] [7] ARIAS-GONZLEZ F, DEL VAL J, COMESAA R, et al. Fiber laser cladding of nickel-based alloy on cast iron［J］. Applied Surface Science, 2016, 374: 197-205.

[8] [8] ZENG X, LI Z, XI F F, et al. Material removal characteristic of laser cladding cobalt-based alloy in the photochemical process［J］. Metals, 2019, 9(6): 657.

[9] [9] BAX B, RAJPUT R, KELLET R, et al. Systematic evaluation of process parameter maps for laser cladding and directed energy deposition［J］. Additive Manufacturing, 2018, 21: 487-494.

[10] [10] SHI J J, ZHU P, FU G Y, et al. Geometry characteristics modeling and process optimization in coaxial laser inside wire cladding［J］. Optics & Laser Technology, 2018, 101: 341-348.

[11] [11] XI W C, SONG B X, ZHAO Y, et al. Geometry and dilution rate analysis and prediction of laser cladding［J］. The International Journal of Advanced Manufacturing Technology, 2019,103(9-12):4695-4702.

[12] [12] WANG X, SUN W, CHEN Y, et al. Research on trajectory planning of complex curved surface parts by laser cladding remanufacturing［J］. The International Journal of Advanced Manufacturing Technology, 2018, 96(5-8): 2397-2406.

[15] [15] LIAN G F, ZHANG H, ZHANG Y, et al. Optimizing processing parameters for multi-track laser cladding utilizing multi-response grey relational analysis［J］. Coatings, 2019, 9(6): 356.

[16] [16] LIAN G F, ZHANG H, ZHANG Y, et al. Investigation of geometric characteristics in curved surface laser cladding with curve path［J］. Metals, 2019, 9(9): 947.

[18] [18] ZHANG N, LIU W W, DENG D W, et al. Effect of electric-magnetic compound field on the pore distribution in laser cladding process［J］. Optics & Laser Technology, 2018, 108: 247-254.

[19] [19] ZHOU S F, ZENG X Y, HU Q W, et al. Analysis of crack behavior for Ni-based WC composite coatings by laser cladding and crack-free realization［J］. Applied Surface Science, 2008, 255(5): 1646-1653.

[20] [20] MAZAR ATABAKI M, MA J, LIU W, et al. Pore formation and its mitigation during hybrid laser/arc welding of advanced high strength steel［J］. Materials & Design, 2015, 67: 509-521.

[21] [21] LE T N, LO Y L. Effects of sulfur concentration and Marangoni convection on melt-pool formation in transition mode of selective laser melting process［J］. Materials & Design, 2019, 179: 107866.

[22] [22] XU J J, RONG Y M, HUANG Y, et al. Keyhole-induced porosity formation during laser welding［J］. Journal of Materials Processing Technology, 2018, 252: 720-727.

[23] [23] KHAIRAL L AH S A, ANDERSON A T, RUBENCHIK A, et al. Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones［J］. Acta Materialia, 2016, 108: 36-45.

[24] [24] ZHOU C Y, ZHAO S S, WANG Y B, et al. Mitigation of pores generation at overlapping zone during laser cladding［J］. Journal of Materials Processing Technology, 2015, 216: 369-374.

[25] [25] MUVVALA G, PATRA KARMAKAR D, NATH A K. Online assessment of TiC decomposition in laser cladding of metal matrix composite coating［J］. Materials & Design, 2017, 121: 310-320.

[26] [26] EMAMIAN A, CORBIN S F, KHAJEPOUR A. Effect of laser cladding process parameters on clad quality and in-situ formed microstructure of Fe-TiC composite coatings［J］. Surface and Coatings Technology, 2010, 205(7): 2007-2015.

[27] [27] LEI Y W, SUN R L, TANG Y, et al. Numerical simulation of temperature distribution and TiC growth kinetics for high power laser clad TiC/NiCrBSiC composite coatings［J］. Optics & Laser Technology, 2012, 44(4): 1141-1147.

[28] [28] HAN T F, XIAO M, ZHANG Y, et al. Effect of Cr content on microstructure and properties of Ni-Ti-xCr coatings by laser cladding［J］. Optik, 2019, 179: 1042-1048.