[1] [1] Liu Qian, Shan Zhongde. Application and prospect of magnesium alloys in automotive industry[J]. Found Technology, 2007, 28(12): 1668-1671.

[2] [2] Coy A E, Viejo F, Skeldon P, et al. Susceptibility of rare-earth-magnesium alloys to micro-galvanic corrosion[J]. Corrosion Science, 2010, 52(12): 3896-3906.

[3] [3] Cao F Y, Shi Z M, Song G L, et al. Stress corrosion cracking of several hot-rolled binary Mg-X alloys[J]. Corrosion Science, 2015, 98: 6-19.

[4] [4] Raman R K S, Jafari S, Harandi S E. Corrosion fatigue fracture of magnesium alloys in bioimplant applications: A review[J]. Engineering Fracture Mechanics, 2015, 137: 97-108.

[5] [5] Zhang P, Ding W J, Lindemann J, et al. Mechanical properties of the hot-rolled Mg-12 Gd-3Y magnesium alloy[J]. Materials Chemistry and Physics, 2009, 118(2-3): 453-458.

[6] [6] Gray J E, Luan B. Protective coatings on magnesium and its alloys-a critical review[J]. Journal of Alloys and Compounds, 2002, 336(1-2): 88-113.

[7] [7] Wang Zhitai, Lin Xin, Cao Yongqing, et al. External cooling condition effects on formation of anomalous eutectic in Ni-Sn alloy by laser remelting[J]. Chinese J Lasers, 2014, 41(12): 1203006.

[8] [8] Zhang Qinglai, Wang Rong, Zhang Bingxin, et al. Effect of laser shock processing on mechanical properties and mesostructures of AZ31 magnesium alloy[J]. Chinese J Lasers, 2015, 42(3): 0303001.

[9] [9] Wang Cheng, Lai Zhilin, He Weifeng, et al. Effect of multi-impact on high cycle fatigue properties of 1Cr11Ni2W2MoV stainless steel subject to laser shock processing[J]. Chinese J Lasers, 2014, 41(1): 0103001.

[10] [10] Wang Jiangtao, Zhang Yongkang, Chen Jufang, et al. Effect of laser shock processing on electrochemical corrosion behavior of 7075 aluminum alloy plasma arc weldments[J]. Chinese J Lasers, 2015, 42(12): 1203006.

[11] [11] Zhu Ying, Fan Bowen, Guo Wei, et al. Influence of laser shock peening times on microstructure and hardness of TA15 titanium alloy[J]. Journal of Beijing University of Aeronautics and Astronautics, 2014, 40(4): 444-448.

[12] [12] Xiong Yi, He Hongyu, Luo Kaiyu, et al. Effect of laser shock processing times on microstructure and microhardness of high carbon pearlitic steel[J]. Chinese J Lasers, 2013, 40(4): 0403006.

[13] [13] Li Xingcheng, Zhang Yongkang. Effect of laser shock times on electrochemical performance of AZ31 magnesium alloy[J]. Laser Technology, 2015, 39(4): 466-470.

[14] [14] Zhang Yongkang, Chen Jufang, Xu Renjun. Experimental research of laser shock strengthening AM50 magnesium alloy[J]. Chinese J Lasers, 2008, 35(7): 1068-1072.

[15] [15] Zhang Y K, You J, Lu J Z, et al. Effects of laser shock processing on stress corrosion cracking susceptibility of AZ31B magnesium alloy[J]. Surface & Coatings Technology, 2010, 204(24): 3947-3953.

[16] [16] Luo K Y, Wang C Y, Sun G F, et al. Investigation and microstructural analyses of massive LSP impacts with coverage area on crack initiation location and tensile properties of AM50 magnesium alloy[J]. Materials Science & Engineering A, 2016, 650: 110-118.

[17] [17] Wang C, Shen X J, An Z B, et al. Effects of laser shock processing on microstructure and mechanical properties of K403 nickel-alloy[J]. Materials and Design, 2016, 89: 582-588.