[1] [1] Pal B. Fabrication and modeling of fused biconical tapered fiber couplers[J]. Fiber and Integrated Optics, 2003, 22(2): 97-117.

[2] [2] Rong Weibin, Zhang Wei, Wang Lefeng, et al.. Simulation and experiments on automatic polarization alignment of fine polarization maintaining fibers[J]. Chinese J Lasers, 2013, 40(12): 1205002.

[3] [3] Nagata H. Chemical properties of fused fiber coupler surface[J]. Optical Fiber Technology, 2000, 6(3): 324-328.

[4] [4] Shuai C, Gao C, Nie Y, et al.. Performance improvement of optical fiber coupler with electric heating versus gas heating[J]. Appl Opt, 2010, 49(24): 4514-4519.

[5] [5] Yokota H, Sugai E, Sasaki Y. Optical irradiation method for fiber coupler fabrications[J]. Optical Review, 1997, 4(1A): 104-107.

[6] [6] Yablon A D. Optical Fiber Fusion Splicing[M]. Berlin: Springer, 2005. 21-23.

[7] [7] Bayle F, Meunier J P. Efficient fabrication of fused-fiber biconical taper structures by a scanned CO2 laser beam technique[J]. Appl Opt, 2005, 44(30): 6402-6411.

[8] [8] Takeuchi Y, Hirayama M, Sumida S, et al.. Characteristics of ceramic microheater for fiber coupler fabrication[J]. Japanese Journal of Applied Physics, 1998, 37(6B): 3665-3668.

[9] [9] Wang Chaohui, Liu Jianhong, Gu Xiaohua, et al.. Double heat system with high temperature resistance furnace of nickel-chromium resistance wire and lanthanum chromite[J]. China Ceramics, 2011, 47(2): 54-56.

[10] [10] Shuai Cijun, Peng Shuping, Wen Xuejun. Design of the electrical heater for fused-taper optical fiber devices[J]. Acta Optica Sinica, 2009, 29(s2): 359-362.

[11] [11] Zhou Siyin, Nie Wansheng, Feng Wei, et al.. Research on the performance change of cavity by pulsed control plasma[J]. Laser &Optoelectronics Process, 2013, 50(7): 072601.

[12] [12] Morishita K, Yamamoto D. Fused fiber couplers wavelength-flattened by arc discharge[C]. Fibres and Optical Passive Components, Proceedings of 2005 IEEE/LEOS Workshop on IEEE, 2005. 187-191.

[13] [13] Tachikura M. Fusion mass-splicing for optical fibers using electric discharges between two pairs of electrodes[J]. Appl Opt, 1984, 23(3): 492-498.

[14] [14] Zhou Xue, Cui Xinglei, Zhai Xiaoyi. Study on influence of silver contact vapor on arc characteristics in aerospace relay[J]. Low Voltage Apparatus, 2012, (15): 6-11.

[15] [15] Ma Qiang, Rong Mingzhe, Anthony B Murphy, et al.. Simulation and experiment on airarc characteristics in low-voltage circuit breaker considering wall ablation[J]. Transactions of China Electrotechnical Society, 2009, 24(12): 74-81.

[16] [16] Rego G, Santos L, Schroder B, et al.. In situ temperature measurement of an optical fiber submitted to electric arc discharges[J]. Photon Technol Lett, IEEE, 2004, 16(9): 2111-2113.

[17] [17] Wiley R, Clark B. Large area isothermic plasma for large diameter and specialty fiber splicing[C]. Optical Fiber Commuication/National Fiber Optic Enginers Conference, 2008.

[18] [18] Wu Zepeng, Xuan Ming, Jia Hongguang, et al.. Infrared image dynamic range compression and contrast enhancement based on optimal mapping curve[J]. Chinese J Lasers, 2013, 40(12): 1209002.

[19] [19] Chen Lulu, Li Xiaolu, He Tao, et al.. Image- matching- based temperature field measurement of heat dispersing surface of aircooled condenser[J]. Acta Optica Sinica, 2013, 33(11): 1112003.

[20] [20] Liu Bo, New Measurement for Detecting Arcs due to the Pantograph Contact Loss Form the Contact Line in Electric Railways[D]. Chengdu: Southwest Jiaotong University, 2002. 24-26.

[21] [21] Shuai Cijun, Duan Ji′an, Miao Jianyu, et al.. Thermal analysis of fused biconical taper in the process of optical fiber coupler predrawing[J]. Journal of Central South University (Science and Technology), 2004, 35(4): 618-621.

[22] [22] Hong Changqing, Han Jiecai, Zhang Xinghong, et al.. Numerical simulation on thermal shock damage behavior of TiB2- Cu composite via combustion synthesis[J]. Rare Metal Materials and Engineering, 2006, 35(1): 47-51.