[1] Yang S D. Formation causes and suppression of cracking in laser-MAG hybrid welding of 30CrMnSiA steel[D]. Harbin: Harbin Institute of Technology, 1-9(2012).

[2] Zhuang M X, Li X M, Xu M et al. Vacuum electron beam welding technology research on 30CrMnSiNi2A ultra-high strength steel[J]. Aeronautical Manufacturing Technology, 60, 100-104(2017).

[3] Wang H M. Research progress on laser surface modifications of metallic materials and laser rapid forming of high performance metallic components[J]. Acta Aeronautica et Astronautica Sinica, 23, 473-478(2002).

[4] Da Sun S, Fabijanic D, Barr C et al. In-situ quench and tempering for microstructure control and enhanced mechanical properties of laser cladded AISI 420 stainless steel powder on 300M steel substrates[J]. Surface and Coatings Technology, 333, 210-219(2018).

[5] Liu J, Li J, Cheng X et al. Effect of dilution and macrosegregation on corrosion resistance of laser clad AerMet100 steel coating on 300M steel substrate[J]. Surface and Coatings Technology, 325, 352-359(2017). http://www.sciencedirect.com/science/article/pii/S0257897217303808

[6] Liu J, Li J, Cheng X et al. Microstructures and tensile properties of laser cladded AerMet100 steel coating on 300M steel[J]. Journal of Materials Science & Technology, 34, 643-652(2018).

[7] Rahman Rashid R A, Nazari K A, Barr C et al. Effect of laser reheat post-treatment on the microstructural characteristics of laser-cladded ultra-high strength steel[J]. Surface and Coatings Technology, 372, 93-102(2019).

[8] Rahman Rashid R A, Barr C J, Palanisamy S et al. Effect of clad orientation on the mechanical properties of laser-clad repaired ultra-high strength 300M steel[J]. Surface and Coatings Technology, 380, 125090(2019).

[9] Barr C, Da Sun S, Easton M et al. Influence of delay strategies and residual heat on in situ tempering in the laser metal deposition of 300M high strength steel[J]. Surface and Coatings Technology, 383, 125279(2020).

[10] Liu F G, Lin X, Song M H et al. Microstructure and mechanical properties of laser solid formed 300M steel[J]. Journal of Alloys and Compounds, 621, 35-41(2015). http://www.sciencedirect.com/science/article/pii/S0925838814022725

[11] Lourenço J M, Sun S D, Sharp K et al. Fatigue and fracture behavior of laser clad repair of AerMet ® 100 ultra-high strength steel[J]. International Journal of Fatigue, 85, 18-30(2016).

[12] Walker K F, Lourenço J M, Sun S et al. Quantitative fractography and modelling of fatigue crack propagation in high strength AerMet® 100 steel repaired with a laser cladding process[J]. International Journal of Fatigue, 94, 288-301(2017).

[13] Barr C, Da Sun S, Easton M et al. Influence of macrosegregation on solidification cracking in laser clad ultra-high strength steels[J]. Surface and Coatings Technology, 340, 126-136(2018).

[14] Sun S D, Liu Q C, Brandt M et al. Effect of laser clad repair on the fatigue behaviour of ultra-high strength AISI 4340 steel[J]. Materials Science and Engineering A, 606, 46-57(2014).

[15] Chew Y. Pang J H L, Bi G J, et al. Effects of laser cladding on fatigue performance of AISI 4340 steel in the as-clad and machine treated conditions[J]. Journal of Materials Processing Technology, 243, 246-257(2017).

[16] Sun G F, Yao S, Wang Z D et al. Microstructure and mechanical properties of HSLA-100 steel repaired by laser metal deposition[J]. Surface and Coatings Technology, 351, 198-211(2018).

[17] Li W Q. Laser cladding intensification on 30CrMnSi surface[J]. Special Casting & Nonferrous Alloys, 39, 1058-1061(2019).

[18] Zhang Z Q, Qin R Y, Sun T et al. Microstructure and properties of laser cladding joints of 30CrMnSiA steel[J]. Welding Technology, 47, 9-14(2018).

[19] Zhou K X, Qing R Y, Cao Q et al. Process of laser cladding of 1Cr15Ni4Mo3 powder on 30CrMnSiNi2A steels[J]. Laser & Optoelectronics Progress, 55, 071404(2018).

[20] Zhang Z Q, Cheng Z H, Cao Q et al. Repairing of 30CrMnSiNi2A high strength steel by laser cladding[J]. Equipment Environmental Engineering, 13, 62-67(2016).

[21] Zhu H M, Hu J P, Li B C et al. Research progress of laser cladding stainless steel coating on Fe-based substrate[J]. Surface Technology, 49, 74-84(2020).

[22] Lei Z L, Li B W, Ni L C et al. Mechanism of the crack formation and suppression in laser-MAG hybrid welded 30CrMnSiA joints[J]. Journal of Materials Processing Technology, 239, 187-194(2017).

[23] Li X J, Huang J, Pan H et al. Microstructure and formability of laser welding joint of QP1180 high-strength steel sheet[J]. Chinese Journal of Lasers, 46, 0302006(2019).

[24] Chipman J. Thermodynamics and phase diagram of the Fe-C system[J]. Metallurgical and Materials Transactions B, 3, 55-64(1972).

[25] Su T J, Wang F C, Li S K et al. Calculation of thermal conductivity for alloy steels[J]. Transactions of Beijing Institute of Technology, 25, 91-94(2005).

[26] Burtsev S A. Exploring ways to improve efficiency of gasdynamic energy separation[J]. High Temperature, 52, 12-18(2014).

[27] Sattar A, Abbas M, Hasham H J et al. Experimental and analytical investigation of steel bolts failed after isothermal heat treatment[J]. Journal of Failure Analysis and Prevention, 15, 327-333(2015).

[28] Liu B X, Chen C X, Yin F X et al[M]. Microstructure analysis and weldability investigation of stainless steel clad plate, 425-433(2017).

[29] Zhu H M, Hu W F, Li Y Z et al. Effect of tempering temperature on microstructure and properties of laser-cladded martensitic stainless steel layer[J]. Chinese Journal of Lasers, 46, 1202001(2019).