[1] [1] Huang Y A, Wu H, Xiao L, Duan Y Q, Zhu H, Bian J, Ye D and Yin Z P 2019 Assembly and applications of 3D conformal electronics on curvilinear surfacesMater. Horiz.6642–83

[2] [2] Wu H, Tian Y, Luo H B, Zhu H, Duan Y Q and Huang Y A 2020 Fabrication techniques for curved electronics on arbitrary surfacesAdv. Mater. Technol.52000093

[3] [3] Tong X L, Yang D Z, Hua T J, Li S, Wang B Y and Shao Y L 2023 Multifunctional fiber for synchronous bio-sensing and power supply in sweat environmentAdv. Funct. Mater.332301174

[4] [4] Di Renzo M, Zappone A, Debbah M, Alouini M S, Yuen C, De Rosny J and Tretyakov S 2020 Smart radio environments empowered by recon figurable intelligent surfaces: how it works, state of research, and the road aheadIEEE J. Sel. Areas Commun.382450–525

[5] [5] Shao Y Zet al2022 Room-temperature high-precision printing of flexible wireless electronics based on MXene inksNat. Commun.133223

[6] [6] Sun G, Wang J J, Feng D J, Xing S Q and Wang X S 2022 A flexible multifunctional active frequency selective surface with angular and polarization stability for curved surface conformalIEEE Trans. Antennas Propag.7011752–60

[7] [7] Ahn D B, Kim W Y, Lee K H, Lee S S, Kim S H, Park S, Hong Y K and Lee S Y 2023 Enabling on-demand conformal Zn-ion batteries on non-developable surfacesAdv. Funct. Mater.332211597

[8] [8] Hwang S, Jang D, Lee B, Ryu Y S, Kwak J, Kim H and Chung S 2023 All direct ink writing of 3D compliant carbon thermoelectric generators for high-energy conversion efficiencyAdv. Energy Mater.132204171

[9] [9] Li J T, Ye F, Vaziri S, Muhammed M, Lemme M C and stling M 2013 Efficient inkjet printing of grapheneAdv. Mater.253985–92

[10] [10] Zhang W Q, Zhang L, Liao Y B and Cheng H Y 2021 Conformal manufacturing of soft deformable sensors on the curved surfaceInt. J. Extrem. Manuf.3042001

[11] [11] Aberuee M and Mortazavi S 2018 Effect of viscosity ratio on the motion of drops flowing on an inclined surfaceTheor. Comput. Fluid Dyn.3273–90

[12] [12] Li Z, Huang J, Yang Y P, Yang S, Zhang J Y, Yuan P F and Zhang J 2020 Additive manufacturing of conformal microstrip antenna using piezoelectric nozzle arrayAppl. Sci.103082

[13] [13] Xu Z N and Wang S Y 2015 A highly accurate dynamic contact angle algorithm for drops on inclined surface based on ellipse-fittingRev. Sci. Instrum.86025104

[14] [14] Zheng H, Sun H, Cao Y B, Lv X L, Wang C X, Chen Y F, Yu H F and Qiu W 2023 Computational fluid dynamics simulation analysis of the effect of curved rice leaves on the deposition behaviour of dropletsPlant Methods19116

[15] [15] Chen Y Wet al2024 Gelatin-based metamaterial hydrogel films with high conformality for ultra-soft tissue monitoringNano-Micro Lett.1634

[16] [16] Shahariar H, Kim I, Soewardiman H and Jur J S 2019 Inkjet printing of reactive silver ink on textilesACS Appl. Mater. Interfaces116208–16

[17] [17] Zhang S, Jiang J J, Jiang Q, Fei W J, Guo C F and Wu Z G 2021 Dynamically conformal mask printing of liquid alloy circuits on morphing objectsAdv. Mater. Technol.62001274

[18] [18] Lohse D 2022 Fundamental fluid dynamics challenges in inkjet printingAnnu. Rev. Fluid Mech.54349–82

[19] [19] Choi K H, Yoo J, Lee C K and Lee S Y 2016 All-inkjet-printed, solid-state flexible supercapacitors on paperEnergy Environ. Sci.92812–21

[20] [20] Li X D, Liu B X, Pei B, Chen J W, Zhou D Z, Peng J Y, Zhang X Z, Jia W and Xu T 2020 Inkjet bioprinting of biomaterialsChem. Rev.12010793–833

[21] [21] Singh M, Haverinen H M, Dhagat P and Jabbour G E 2010 Inkjet printing-process and its applicationsAdv. Mater.22673–85

[22] [22] Carou-Senra P, Rodrguez-Pombo L, Awad A, Basit A W, Alvarez-Lorenzo C and Goyanes A 2024 Inkjet printing of pharmaceuticalsAdv. Mater.362309164

[23] [23] Lee J H, Yang G J, Kim C H, Mahajan R L, Lee S Y and Park S J 2022 Flexible solid-state hybrid supercapacitors for the internet of everything (IoE)Energy Environ. Sci.152233–58

[24] [24] Gazeau J P, Eon A, Zeghloul S and Arsicault M 2011 New printing robot for high-resolution pictures on three-dimensional wide surfacesIEEE Trans. Ind. Electron.58384–91

[25] [25] Hong F, Lampret B, Myant C, Hodges S and Boyle D 2023 5-axis multi-material 3D printing of curved electrical tracesAddit. Manuf.70103546

[26] [26] Zhang G Q, Wang Y H, Chen Z W, Xu X G, Dong K and Xiong Y 2023 Robot-assisted conformal additive manufacturing for continuous fibre-reinforced grid-stiffened shell structuresVirtual Phys. Prototyp.18e2203695

[27] [27] Buchner T J Ket al2023 Vision-controlled jetting for composite systems and robotsNature623522–30

[28] [28] Carou-Senra P, Ong J J, Castro B M, Seoane-Viao I, Rodrguez-Pombo L, Cabalar P, Alvarez-Lorenzo C, Basit A W, Prez G and Goyanes A 2023 Predicting pharmaceutical inkjet printing outcomes using machine learningInt. J. Pharm.X5100181

[29] [29] He W L, Cui Y F, Luo S G, Hu W T, Wang K N, Yang Z, Cao H and Wang D 2022 High-throughput preparation and machine learning screening of a blue-phase liquid crystal based on inkjet printingMolecules276938

[30] [30] Huang X, Ng W L and Yeong W Y 2024 Predicting the number of printed cells during inkjet-based bioprinting process based on droplet velocity profile using machine learning approachesJ. Intell. Manuf.352349–64

[31] [31] Kim S, Wenger R, Brgy O, Balestra G, Jeong U and Jung S 2023 Predicting inkjet jetting behavior for viscoelastic inks using machine learningFlex. Print. Electron.8035007

[32] [32] Zhang H N and Moon S K 2021 Reviews on machine learning approaches for process optimization in noncontact direct ink writingACS Appl. Mater. Interfaces1353323–45

[33] [33] Delaney J T Jr, Smith P J and Schubert U S 2009 Inkjet printing of proteinsSoft Matter54866–77

[34] [34] Fang M, Li T L, Zhang S J, Rao K V and Belova L 2020 Design and tailoring of inks for inkjet patterning of metal oxidesR. Soc. Open Sci.7200242

[35] [35] Vakili H, Wickstrm H, Desai D, Preis M and Sandler N 2017 Application of a handheld NIR spectrometer in prediction of drug content in inkjet printed orodispersible formulations containing prednisolone and levothyroxineInt. J. Pharm.524414–23

[36] [36] Wickstrm H, Nyman J O, Indola M, Sundelin H, Kronberg L, Preis M, Rantanen J and Sandler N 2017 Colorimetry as quality control tool for individual inkjet-printed pediatric formulationsAAPS PharmSciTech18293–302

[37] [37] Zub K, Hoeppener S and Schubert U S 2022 Inkjet printing and 3D printing strategies for biosensing, analytical, and diagnostic applicationsAdv. Mater.34e2105015

[38] [38] Shah M A, Lee D G, Lee B Y and Hur S 2021 Classifications and applications of inkjet printing technology: a reviewIEEE Access9140079–102

[39] [39] Tan H W, Choong Y Y C, Kuo C N, Low H Y and Chua C K 2022 3D printed electronics: processes, materials and future trendsProg. Mater. Sci.127100945

[40] [40] Li H Y, Liu J K, Li K and Liu Y X 2019 Piezoelectric micro-jet devices: a reviewSens. ActuatorsA297111552

[41] [41] Yang Z J, Tian H M, Wang C H, Li X M, Chen X L, Chen X M and Shao J Y 2023 Piezoelectric drop-on-demand inkjet printing with ultra-high droplet velocityResearch60248

[42] [42] Yang Z J, Tian H M, Wang C H, Li X M, Chen X L, Chen X M and Shao J Y 2022 Actuation waveform optimization via multi-pulse crosstalk modulation for stable ultra-high frequency piezoelectric drop-on-demand printingAddit. Manuf.60103165

[43] [43] Qin W, Li S J, Wei S, Qi S T, Zhang W P, Kang T and Li Y 2023 Direct manufacturing technology for high-precision follow-the-shape circuits on complex, hard, curved surfacesAdv. Mater. Technol.82300295

[44] [44] Wang Q S, Liao Y H, Ho Y H, Wang K, Jin W Z, Guan Y M and Fu W X 2023 A study on cell viability based on thermal inkjet three-dimensional bioprintingPhys. Fluids35082007

[45] [45] Wilkinson N J, Smith M A A, Kay R W and Harris R A 2019 A review of aerosol jet printing-a non-traditional hybrid process for micro-manufacturingInt. J. Adv. Manuf. Technol.1054599–619

[46] [46] Goh G L, Zhang H N, Chong T H and Yeong W Y 2021 3D printing of multilayered and multimaterial electronics: a reviewAdv. Electron. Mater.72100445

[47] [47] Park H, Hwang J, Lee J and Kang D J 2023 Rapid electrohydrodynamic-driven pattern replication over a large area via ultrahigh voltage pulsesACS Nano1722456–66

[48] [48] Hayes B, Hainsworth T and MacCurdy R 2022 Liquid-solid co-printing of multi-material 3D fluidic devices via material jettingAddit. Manuf.55102785

[49] [49] Tao R, Granier F and Therriault D 2022 Multi-material freeform 3D printing of flexible piezoelectric composite sensors using a supporting fluidAddit. Manuf.60103243

[50] [50] Saengchairat N, Tran T and Chua C K 2017 A review: additive manufacturing for active electronic componentsVirtual Phys. Prototyp.1231–46

[51] [51] Zeng M Xet al2023 High-throughput printing of combinatorial materials from aerosolsNature617292–8

[52] [52] Duan Y Q, Yu R, Zhang H Y, Yang W L, Xie W S, Huang Y A and Yin Z P 2024 Programmable, high-resolution printing of spatially graded perovskites for multispectral photodetectorsAdv. Mater.36e2313946

[53] [53] Phung T H, Park S H, Kim I, Lee T M and Kwon K S 2023 Machine learning approach to monitor inkjet jetting status based on the piezo self-sensingSci. Rep.1318089

[54] [54] Brishty F P, Urner R and Grau G 2022 Machine learning based data driven inkjet printed electronics: jetting prediction for novel inksFlex. Print. Electron.7015009

[55] [55] Kim S, Cho M and Jung S 2022 The design of an inkjet drive waveform using machine learningSci. Rep.124841

[56] [56] Goh G L, Agarwala S and Yeong W Y 2019 Aerosol-jet-printed preferentially aligned carbon nanotube twin-lines for printed electronicsACS Appl. Mater. Interfaces1143719–30

[57] [57] Mashayekhi M, Winchester L, Evans L, Pease T, Laurila M M, Mntysalo M, Ogier S, Ters L and Carrabina J 2016 Evaluation of aerosol, superfine inkjet, and photolithography printing techniques for metallization of application specific printed electronic circuitsIEEE Trans. Electron Devices631246–53

[58] [58] Zhang H N, Hong E H, Chen X D and Liu Z X 2023 Machine learning enables process optimization of aerosol jet 3D printing based on the droplet morphologyACS Appl. Mater. Interfaces1514532–45

[59] [59] Chen J K, Yang S H, Li Y Q, Huang Y A and Yin Z P 2020 Active curved surface deforming of flexible conformal electronics by multi-fingered actuatorRobot. Comput.-Integr. Manuf.64101942

[60] [60] Ng L W T, Zhu X X, Hu G H, Macadam N, Um D, Wu T C, Le Moal F, Jones C and Hasan T 2019 Conformal printing of graphene for single- and multilayered devices onto arbitrarily shaped 3D surfacesAdv. Funct. Mater.291807933

[61] [61] Chen X T, Li Z N, Chen Y, Zou S H, Xiao L P and Fan J 2023 High-throughput synthesis of AlPO and SAPO zeolites by ink jet printingChem. Commun.592157–60

[62] [62] Deng X, Li H Z and Song Y L 2024 Inkjet printing-based high-throughput DNA synthesisGiant17100222

[63] [63] Suwannakot P, Zhu L, Tolentino M A K, Du E Y, Sexton A, Myers S and Gooding J J 2024 Electrostatically cross-linked bioinks for jetting-based bioprinting of 3D cell culturesACS Appl. Bio Mater.7269–83

[64] [64] Ren X Bet al2023 Topology-mediated molecule nucleation anchoring enables inkjet printing of organic semiconducting single crystals for high-performance printed electronicsACS Nano1725175–84

[65] [65] Zhang T, Wu Y T, Yu Y H, Li Y J, Qin G W and Li S 2022 High throughput screening driven discovery of Mn5Co10Fe30Ni55Ox as electrocatalyst for water oxidation and electrospinning synthesisAppl. Surf. Sci.588152959

[66] [66] Chen S, Zhang L H, Yan L J, Xiang X D, Zhao X Z, Yang S H and Xu B M 2019 Accelerating the screening of perovskite compositions for photovoltaic applications through high-throughput inkjet printingAdv. Funct. Mater.291905487

[67] [67] Chen Set al2021 High throughput screening of novel tribromide perovskite materials for high-photovoltage solar cellsJ. Mater. Chem.A925502–12

[68] [68] Zhou Z X, Cantu L R, Chen X S, Alexander M R, Roberts C J, Hague R, Tuck C, Irvine D and Wildman R 2019 High-throughput characterization of fluid properties to predict droplet ejection for three-dimensional inkjet printing formulationsAddit. Manuf.29100792

[69] [69] Agrawal A and Choudhary A 2016 Perspective: materials informatics and big data: realization of the “fourth paradigm” of science in materials scienceAPL Mater.4053208

[70] [70] Yao L, Xu Z M, Qiu J H, Zhang J, Yang D W, Yan Y G and Tang X F 2022 Preparation andin-situhigh-throughput screening of bi thixotropic inkAdv. Mater. Interfaces92101691

[71] [71] Kirtania S G, Elger A W, Hasan M R, Wisniewska A, Sekhar K, Karacolak T and Sekhar P K 2020 Flexible antennas: a reviewMicromachines11847

[72] [72] Yang W D, Cheng X, Guo Z H, Sun Q H, Wang J and Wang C H 2023 Design, fabrication and applications of flexible RFID antennas based on printed electronic materials and technologiesJ. Mater. Chem.C11406–25

[73] [73] Fan X C, Zhang X H, Li Y, He H J, Wang Q X, Lan L L, Song W Z, Qiu T and Lu W B 2023 Flexible two-dimensional MXene-based antennasNanoscale Horiz.8309–19

[74] [74] Lee J H, Cho K L and Kim J K 2024 Age of flexible electronics: emerging trends in soft multifunctional sensorsAdv. Mater.362310505

[75] [75] Lee J Het al2022 Rational design of all resistive multifunctional sensors with stimulus discriminabilityAdv. Funct. Mater.322107570

[76] [76] Luo J C, Gao S J, Luo H, Wang L, Huang X W, Guo Z, Lai X J, Lin L W, Li R K Y and Gao J F 2021 Superhydrophobic and breathable smart MXene-based textile for multifunctional wearable sensing electronicsChem. Eng. J.406126898

[77] [77] Zhang H, Liu D, Lee J H, Chen H M, Kim E, Shen X, Zheng Q B, Yang J L and Kim J K 2021 Anisotropic, wrinkled, and crack-bridging structure for ultrasensitive, highly selective multidirectional strain sensorsNano-Micro Lett.13122

[78] [78] Li F C, Liu Y, Shi X L, Li H P, Wang C H, Zhang Q, Ma R J and Liang J J 2020 Printable and stretchable temperature-strain dual-sensing nanocomposite with high sensitivity and perfect stimulus discriminabilityNano Lett.206176–84

[79] [79] Agarwala S, Goh G L, Le T S D, An J N, Peh Z K, Yeong W Y and Kim Y J 2019 Wearable bandage-based strain sensor for home healthcare: combining 3D aerosol jet printing and laser sinteringACS Sens.4218–26

[80] [80] Bae G Y, Han J T, Lee G, Lee S, Kim S W, Park S, Kwon J, Jung S and Cho K 2018 Pressure/temperature sensing bimodal electronic skin with stimulus discriminability and linear sensitivityAdv. Mater.301803388

[81] [81] Liu H X, Wang L, Lin G M and Feng Y H 2022 Recent progress in the fabrication of flexible materials for wearable sensorsBiomater. Sci.10614–32

[82] [82] Yan K, Li J A, Pan L J and Shi Y 2020 Inkjet printing for flexible and wearable electronicsAPL Mater.8120705

[83] [83] Uzun S, Schelling M, Hantanasirisakul K, Mathis T S, Askeland R, Dion G and Gogotsi Y 2021 Additive-free aqueous MXene inks for thermal inkjet printing on textilesSmall172006376

[84] [84] Ma S Met al2024 Ultra-sensitive and stable multiplexed biosensors array in fully printed and integrated platforms for reliable perspiration analysisAdv. Mater.362311106

[85] [85] Dargusch M, Liu W D and Chen Z G 2020 Thermoelectric generators: alternative power supply for wearable electrocardiographic systemsAdv. Sci.72001362

[86] [86] Fan F R, Tang W and Wang Z L 2016 Flexible nanogenerators for energy harvesting and self-powered electronicsAdv. Mater.284283–305

[87] [87] Ryu H, Yoon H J and Kim S W 2019 Hybrid energy harvesters: toward sustainable energy harvestingAdv. Mater.311802898

[88] [88] Hu G Y, Edwards H and Lee M 2019 Silicon integrated circuit thermoelectric generators with a high specific power generation capacityNat. Electron.2300–6

[89] [89] Kim Fet al2018 3D printing of shape-conformable thermoelectric materials using all-inorganic Bi2Te3-based inksNat. Energy3301–9

[90] [90] Schwurack R, Unz S and Beckmann M 2019 The importance of considering parasitic heat losses when modeling TEG performance for high-temperature applicationsJ. Electron. Mater.481917–25

[91] [91] Gao Z H, Sun H B, Fu L, Ye F L, Zhang Y, Luo W and Huang Y H 2018 Promises, challenges, and recent progress of inorganic solid-state electrolytes for all-solid-state lithium batteriesAdv. Mater.301705702

[92] [92] Li Z D, Su J J and Wang X D 2021 Atomic layer deposition in the development of supercapacitor and lithium-ion battery devicesCarbon179299–326

[93] [93] Zhang Z B, Zhou X F and Liu Z P 2021 Conformal coating of a carbon film on 3D hosts toward stable lithium anodesACS Appl. Energy Mater.47288–97

[94] [94] Chen T W, Shuang Z W, Hu J, Zhao Y L, Wei D H, Ye J H, Zhang G H and Duan H G 2022 Freestanding 3D metallic micromesh for high-performance flexible transparent solid-state zinc batteriesSmall182201628

[95] [95] Lv Z Set al2022 Strain-driven auto-detachable patterning of flexible electrodesAdv. Mater.342202877

[96] [96] Yun Jet al2020 A fractal-designed stretchable and transparent microsupercapacitor as a skin-attachable energy storage deviceChem. Eng. J.387124076

[97] [97] Zhang G H, Zhao Y L, Hu J, Liu H Z, Chen T W, Yu H H and Duan H G 2022 Freestanding ultralight metallic micromesh for high-energy density flexible transparent supercapacitorsJ. Mater. Chem.A1022182–93

[98] [98] Kim Tet al2022 Ultrathin crystalline-silicon-based strain gauges with deep learning algorithms for silent speech interfacesNat. Commun.135815

[99] [99] Sani E Set al2023 A stretchable wireless wearable bioelectronic system for multiplexed monitoring and combination treatment of infected chronic woundsSci. Adv.9eadf7388

[100] [100] Cho Y U, Lim S L, Hong J H and Yu K J 2022 Transparent neural implantable devices: a comprehensive review of challenges and progressnpj Flex. Electron.653

[101] [101] Jung Y H, Kim J U, Lee J S, Shin J H, Jung W, Ok J and Kim T I 2020 Injectable biomedical devices for sensing and stimulating internal body organsAdv. Mater.321907478

[102] [102] Lee J Yet al2022 Foldable three dimensional neural electrode arrays for simultaneous brain interfacing of cortical surface and intracortical multilayersnpj Flex. Electron.686

[103] [103] Mueller J P B, Rubin N A, Devlin R C, Groever B and Capasso F 2017 Metasurface polarization optics: independent phase control of arbitrary orthogonal states of polarizationPhys. Rev. Lett.118113901

[104] [104] Chen X Z, Zhang Y, Huang L L and Zhang S 2014 Ultrathin metasurface laser beam shaperAdv. Opt. Mater.2978–82

[105] [105] Wang L, Kruk S, Tang H Z, Li T, Kravchenko I, Neshev D N and Kivshar Y S 2016 Grayscale transparent metasurface hologramsOptica31504–5

[106] [106] Gupta E, Bonner C, Lazarus N, Mirotznik M S and Nicholson K J 2023 Multiaxis manufacture of conformal metasurface antennasIEEE Antennas Wirel. Propag. Lett.222629–33

[107] [107] Zhou Y L, Wang S L, Yin J Y, Wang J J, Manshaii F, Xiao X, Zhang T Q, Bao H, Jiang S and Chen J 2024 Flexible metasurfaces for multifunctional interfacesACS Nano182685–707

[108] [108] Wang X W, Chen R and Sun S H 2023 Material manufacturing from atomic layerInt. J. Extrem. Manuf.5043001

[109] [109] Dasgupta N P, Lee H B R, Bent S F and Weiss P S 2016 Recent advances in atomic layer depositionChem. Mater.281943–7

[110] [110] Farjam N, Cho T H, Dasgupta N P and Barton K 2020 Subtractive patterning: high-resolution electrohydrodynamic jet printing with solventsAppl. Phys. Lett.117133702

[111] [111] Li W Y, Wang Y, Li M, Garbarini L P and Omenetto F G 2019 Inkjet printing of patterned, multispectral, and biocompatible photonic crystalsAdv. Mater.311901036

[112] [112] Xu F F, Gong Z L, Zhong Y W, Yao J N and Zhao Y S 2020 Wavelength-tunable single-mode microlasers based on photoresponsive pitch modulation of liquid crystals for information encryptionResearch20206539431

[113] [113] Wang M, Jiang K K, Gao Y F, Liu Y M, Zhang Z C, Zhao W W, Ji H J, Zheng T T and Feng H H 2021 A facile fabrication of conjugated fluorescent nanoparticles and micro-scale patterned encryption via high resolution inkjet printingNanoscale1314337–45

[114] [114] He X Y, Zhang J Y, Liu X Y, Jin Z W, Lam J W Y and Tang B Z 2023 A multiresponsive functional AIEgen for spatiotemporal pattern control and all-round information encryptionAngew. Chem., Int. Ed.62e202300353

[115] [115] Li C C, Liu J Z, Qiu X Y, Yang X, Huang X and Zhang X X 2023 Photoswitchable and reversible fluorescent eutectogels for conformal information encryptionAngew. Chem., Int. Ed.62e202313971

[116] [116] Kim H K, Lee D and Lim S 2016 A fluidically tunable metasurface absorber for flexible large-scale wireless ethanol sensor applicationsSensors161246

[117] [117] Huang Y Aet al2021 Programmable robotized ‘transfer-and-jet’ printing for large, 3D curved electronics on complex surfacesInt. J. Extrem. Manuf.3045101

[118] [118] Feng R, Mu Y F, Zeng X W, Jia W J, Liu Y X, Jiang X J, Gong Q B and Hu Y F 2021 A flexible integrated bending strain and pressure sensor system for motion monitoringSensors213969

[119] [119] Niu Y J, Han Y F, Cheng H, Xiong Z X, Luo B, Ma T, Li L B, Liu S N, Chen X M and Yi C L 2023 Synthesized silver nanoparticles decorated reduced graphene oxide/silver ink for aerosol jet printed conformal temperature sensor with a wide sensing range and excellent stabilityJ. Mater. Res. Technol.25873–86

[120] [120] Wei D M, Zhang R, Lin J T, Ratnayake D, Olowo O O, Nimon A S, Alqatamin M, Sherehiy A and Popa D O 2024 Precision evaluation of tactile sensor fabrication using a robotic additive manufacturing platformJ. Micro Bio Robot.201

[121] [121] Chen K Y, Biswas A, Cai S H, Huang J Y and Andrews J 2024 Inkjet printed potentiometric sensors for nitrate detection directly in soil enabled by a hydrophilic passivation layerAdv. Mater. Technol.92301140

[122] [122] Goh G L, Dikshit V, Koneru R, Peh Z K, Lu W Y, Goh G D and Yeong W Y 2022 Fabrication of design-optimized multifunctional safety cage with conformal circuits for drone using hybrid 3D printing technologyInt. J. Adv. Manuf. Technol.1202573–86

[123] [123] Beziuk G, Krajewski A, Baum T C, Nicholson K J and Ghorbani K 2024 Electromagnetic and electronic aerospace conformal load-bearing smart skins: a reviewIEEE J. Microw.413–42

[124] [124] Sun T Met al2024 Artificial intelligence meets flexible sensors: emerging smart flexible sensing systems driven by machine learning and artificial synapsesNano-Micro Lett.1614

[125] [125] Andritsos K, Theodorakos I, Zacharatos F, Kabla A, Melamed S, de la Vega F, Porte Y, Too P and Zergioti I 2023 Conformal laser printing and laser sintering of Ag nanoparticle inks: a digital approach for the additive manufacturing of micro-conductive patterns on patterned flexible substratesVirtual Phys. Prototyp.18e2138462

[126] [126] Golparvar A, Tonello S, Meimandi A and Carrara S 2023 Inkjet-printed soft intelligent medical bracelet for simultaneous real-time sweat potassium (K+), sodium (Na+), and skin temperature analysisIEEE Sens. Lett.75501504

[127] [127] Burton M R, Mehraban S, Beynon D, McGettrick J, Watson T, Lavery N P and Carnie M J 2019 3D printed SnSe thermoelectric generators with high figure of meritAdv. Energy Mater.91900201

[128] [128] Mytafides C K, Tzounis L, Karalis G, Formanek P and Paipetis A S 2021 Fully printed and flexible carbon nanotube-based thermoelectric generator capable for high-temperature applicationsJ. Power Sources507230323

[129] [129] Li W J, Nozariasbmarz A, Kishore R A, Kang H B, Dettor C, Zhu H T, Poudel B and Priya S 2021 Conformal high-power-density half-Heusler thermoelectric modules: a pathway toward practical power generatorsACS Appl. Mater. Interfaces1353935–44

[130] [130] Lee B, Cho H, Park K T, Kim J S, Park M, Kim H, Hong Y and Chung S 2020 High-performance compliant thermoelectric generators with magnetically self-assembled soft heat conductors for self-powered wearable electronicsNat. Commun.115948

[131] [131] Xu Set al2013 Stretchable batteries with self-similar serpentine interconnects and integrated wireless recharging systemsNat. Commun.41543

[132] [132] Maske V A and More A P 2024 Conformal coatings for lithium-ion batteries: a comprehensive reviewProg. Org. Coat.188108252

[133] [133] Park J, Kim H W, Lim S, Yi H, Wu Z Y, Kwon I G, Yeo W H, Song E and Yu K J 2024 Conformal fixation strategies and bioadhesives for soft bioelectronicsAdv. Funct. Mater.342313728

[134] [134] Park Yet al2021 Three-dimensional, multifunctional neural interfaces for cortical spheroids and engineered assembloidsSci. Adv.7eabf9153

[135] [135] Park Y Get al2024In-vivointegration of soft neural probes through high-resolution printing of liquid electronics on the craniumNat. Commun.151772

[136] [136] Bachmann B, Adly N Y, Schnitker J, Yakushenko A, Rinklin P, Offenhusser A and Wolfrum B 2017 All-inkjet-printed gold microelectrode arrays for extracellular recording of action potentialsFlex. Print. Electron.2035003

[137] [137] Zhao X, Zou H C, Wang M, Wang J W, Wang T, Wang L H and Chen X D 2024 Conformal neuromorphic bioelectronics for sense digitalizationAdv. Mater.362403444

[138] [138] Jose J, Peter A, Thajudeen K Y, De Lourdes Gomes Pereira M, Athira V P, Bhat S G and Michel H 2024 Recent advances in the design and development of bioink formulations for various biomedical applicationsResults Eng.22102060

[139] [139] Acosta-Vlez G F, Linsley C S, Craig M C and Wu B M 2017 Photocurable bioink for the inkjet 3D pharming of hydrophilic drugsBioengineering411

[140] [140] Yamagishi K, Takeoka S and Fujie T 2019 Printed nanofilms mechanically conforming to living bodiesBiomater. Sci.7520–31

[141] [141] Sagha fiM Ket al2024 Printed electronic devices and systems for interfacing with single cells up to organoidsAdv. Funct. Mater.342308613

[142] [142] Chang S Y, Guo X X and Ni X J 2018 Optical metasurfaces: progress and applicationsAnnu. Rev. Mater. Res.48279–302

[143] [143] Lee H, Lee J K, Seung H M and Kim Y Y 2018 Mass-stiffness substructuring of an elastic metasurface for full transmission beam steeringJ. Mech. Phys. Solids112577–93

[144] [144] Assouar B, Liang B, Wu Y, Li Y, Cheng J C and Jing Y 2018 Acoustic metasurfacesNat. Rev. Mater.3460–72

[145] [145] Cho T Het al2020 Area-selective atomic layer deposition patterned by electrohydrodynamic jet printing for additive manufacturing of functional materials and devicesACS Nano1417262–72

[146] [146] Rorem B A, Cho T H, Farjam N, Lenef J D, Barton K, Dasgupta N P and Guo L J 2022 Integrating structural colors with additive manufacturing using atomic layer depositionACS Appl. Mater. Interfaces1431099–108

[147] [147] Xie J, Liu L, Piao J, Ge H, Wang Y, Yang H, Shen W, Cao K and Chen S 2022 Triple-functional fluoropolymers for inkjet-printing perovskite light-emitting diodesMater. Today Chem.26101105

[148] [148] Liu Z W, Peng W X, Xiao H, Yu J Z, Song W and Zhang H Q 2023 Design of zero-index metasurface for flexible microwave power harvesterIEEE Antennas Wirel. Propag. Lett.223067–71

[149] [149] Donie Y Jet al2021 Phase-separated nanophotonic structures by inkjet printingACS Nano157305–17

[150] [150] Lai W Xet al2024 Electrospray deposition for electronic thin films on 3D freeform surfaces: from mechanisms to applicationsAdv. Mater. Technol.92400192

[151] [151] Le X X, Shang H, Wu S S, Zhang J W, Liu M J, Zheng Y F and Chen T 2021 Heterogeneous fluorescent organohydrogel enables dynamic anti-counterfeitingAdv. Funct. Mater.312108365

[152] [152] Gao Z, Han Y F and Wang F 2018 Cooperative supramolecular polymers with anthracene. Endoperoxide photo-switching for fluorescent anti-counterfeitingNat. Commun.93977

[153] [153] Ji S C, Xue Q and Xie G H 2023In situpost-synthesis of luminescent Lewis acid-base adductsChem. Commun.595030–8

[154] [154] Sun Y, Le X X, Zhou S Y and Chen T 2022 Recent progress in smart polymeric gel-based information storage for anti-counterfeitingAdv. Mater.342201262

[155] [155] Zhang Y, Zhang G Y, Qiao J and Li L Q 2023 Design andin situadditive manufacturing of multifunctional structuresEngineering2858–68

[156] [156] Altillawi M, Li S L, Prakhya S M, Liu Z Y and Serrat J 2024 Implicit learning of scene geometry from poses for global localizationIEEE Robot. Autom. Lett.9955–62

[157] [157] Kayaku M, Kabas O, nal , Paac S and Dinca M N 2024 Non-destructive prediction of hazelnut and hazelnut kernel deformation energy using machine learning techniquesInt. J. Food Prop.27326–40

[158] [158] Albanna Met al2019In situbioprinting of autologous skin cells accelerates wound healing of extensive excisional full-thickness woundsSci. Rep.91856

[159] [159] Zhu Z J, Park H S and McAlpine M C 2020 3D printed deformable sensorsSci. Adv.6eaeb5575

[160] [160] Guyll B I, Petersen L D, Pint C L and Secor E B 2024 Enhanced resolution, throughput, and stability of aerosol jet printing via in line heatingAdv. Funct. Mater.342316426

[161] [161] Wang D Zet al2022 Large area polymer semiconductor sub-microwire arrays by coaxial focused electrohydrodynamic jet printing for high-performance OFETsNat. Commun.136214

[162] [162] Jia S G, Gao H W, Xue Z G and Meng X H 2022 Recent advances in multifunctional wearable sensors and systems: design, fabrication, and applicationsBiosensors121057

[163] [163] Cao H Cet al2024 Electrically tunable multiple-effects synergistic and boosted photoelectric performance in Te/WSe2 mixed-dimensional heterojunction phototransistorsAdv. Sci.112400018

[164] [164] Rahimnejad M, Labont-Dupuis T, Demarquette N R and Lerouge S 2021 A rheological approach to assess the printability of thermosensitive chitosan-based biomaterial inksBiomed. Mater.16015003

[165] [165] Piovari M, Foshey M, Xu J, Erps T, Babaei V, Didyk P, Rusinkiewicz S, Matusik W and Bickel B 2022 Closed-loop control of direct ink writing via reinforcement learningACM Trans. Graph.41112

[166] [166] Chen G Cet al2024 Conformal fabrication of thick film platinum strain gauge via error regulation strategies forin situhigh-temperature strain detectionACS Appl. Mater. Interfaces16966–74

[167] [167] Shan Y J, Shui Y Y, Hua J Y and Mao H C 2023 Additive manufacturing of non-planar layers using isothermal surface slicingJ. Manuf. Process.86326–35

[168] [168] Kucukdeger E, Tong Y X, Singh M, Zhang J R, Harding L K, Salado A, Ellingson S W and Johnson B N 2021 Conformal 3D printing of non-planar antennas on wrinkled and folded kapton films using point cloud dataFlex. Print. Electron.6044002

[169] [169] Wu H, Luo H B, Wang K X, Ye D and Huang Y A 2021 Enhanced geometric precision of non-contact, conformal 3D printing via “error-transferred” towards jetting-directionPrecis. Eng.721–12

[170] [170] Ramesh R, Mannan M A and Poo A N 2000 Error compensation in machine tools—a review: part I: geometric, cutting-force induced and fixture-dependent errorsInt. J. Mach. Tools Manuf.401235–56

[171] [171] Liu Y T, Ding F, Li D, Wu Y G, Xue J D, Wang W, Qiao Z and Wang B 2020 Machining accuracy improvement for a dual-spindle ultra-precision drum roll lathe based on geometric error analysis and calibrationPrecis. Eng.66401–16

[172] [172] Tao H F, Chen R, Xuan J P, Xia Q, Yang Z Y, Zhang X, He S and Shi T L 2020 Prioritization analysis and compensation of geometric errors for ultra-precision lathe based on the random forest methodologyPrecis. Eng.6123–40

[173] [173] Yang J X and Ding H 2016 A new position independent geometric errors identification model of five-axis serial machine tools based on differential motion matricesInt. J. Mach. Tools Manuf.10468–77

[174] [174] Xiong J C, Chen J K, Wang Y X, Yin Z P and Li Y Q 2024 Planning method of droplet fusion scheduling based on mixed-integer programmingSci. China Technol. Sci.67157–71

[175] [175] Wang J and Chiu G T C 2023 Drop-on-demand inkjet drop control with one-step look ahead estimation of model parametersIEEE/ASME Trans. Mechatronics281993–2002

[176] [176] Michael S, Choi Y S, Boughey C and Kar-Narayan S 2017 Controlling and assessing the quality of aerosol jet printed features for large area and flexible electronicsFlex. Print. Electron.2015004

[177] [177] Vlnieska V, Gilshtein E, Kunka D, Heier J and Romanyuk Y E 2022 Aerosol jet printing of 3D pillar arrays from photopolymer inkPolymers143411

[178] [178] Wang H Yet al2024 Self-driven, monopolar electrohydrodynamic printing via dielectric nanoparticle layerNano Lett.249511–9

[179] [179] Jiang Yet al2024 Transient charge-driven 3D conformal printing via pulsed-plasma impingementProc. Natl Acad. Sci. USA121e2402135121

[180] [180] Yi H, Luo J, Liu M L, Cao H J and Qi L H 2022 Metal droplet printing of tube with high-quality inner surface via helical printing trajectory and soluble supportVirtual Phys. Prototyp.17582–98

[181] [181] Alkadi F, Lee K C, Bashiri A H and Choi J W 2020 Conformal additive manufacturing using a direct-print processAddit. Manuf.32100975

[182] [182] Allen R J A and Trask R S 2015 An experimental demonstration of effective curved layer fused filament fabrication utilising a parallel deposition robotAddit. Manuf.878–87

[183] [183] Pelzer L and Hopmann C 2021 Additive manufacturing of non-planar layers with variable layer heightAddit. Manuf.37101697