[1] [1] Chinese Aeronautical Materials Handbook Compiling Committee. Aeronautical Materials Handbook［M］. Beijing: Chinese Standards Press, 1988.

[2] [2] Yan Mufu, Liu Ruiliang, Wu Yeqiong, et al.. First-principles characterization on mechanical properties of phases produced during lower temperature nitriding for nanocrystallized 3J33 steel［J］. Transactions of Materials and Heat Treatment, 2009, 30(2): 167-171.

[3] [3] M Dorman, M B Toparli, N Smyth, et al.. Effect of laser shock peening on residual stress and fatigue life of clad 2024 aluminium sheet containing scribe defects［J］. Materials Science and Engineering A, 2012, 548: 142-151.

[4] [4] Weifeng He, Yuqin Li, Xiangfan Nie, et al.. A study of the microstructure and hardness of Ti-5AL-2Sn-2Zr-4Mo-4Cr by laser shock peening［J］. Applied Mechanics and Materials, 2011, 84-85: 471-475.

[5] [5] Xiangfan Nie, Nidong Long, Weifeng He, et al.. The effect on the surface of Ti-5Al-2Sn-2Zr-4Mo-4Cr by laser shock peening［J］. Materials Science Forum, 2011, 694: 946-950.

[6] [6] Y Q Li, W F He, Y H Li, et al.. Characterization of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy by laser shock peening［J］. Materials Science Forum, 2012, 697-698: 466-469.

[7] [7] R Melookaran, A Melaibari, C Deng, et al.. Laser shock processing on microstructure and hardness of polycrystalline cubic boron nitride tools with and without nanodiamond powders［J］. Materials and Design, 2012, 35: 235-242.

[8] [8] Zhou Jianzhong, Xu Zengchuang, Huang Shu, et al.. Effects of different stress ratios on fatigue crack growth in laser shot peened 6061-T6 aluminum alloy［J］. Chinese J Lasers, 2011, 38(9): 0903006.

[9] [9] Huang Shu, Zhou Jianzhong, Jiang Suqin, et al.. Study on strain hardening and fatigue fracture of AZ31B magnesium alloy after laser shot peening［J］. Chinese J Lasers, 2011, 38(8): 0803002.

[10] [10] Cao Ziwen, Zou Shikun, Liu Fangjun, et al.. Laser shock processing on 1Cr11Ni2W2MoV martensite steel［J］. Chinese J Lasers, 2008, 35(2): 316-320.

[11] [11] Zhou Jianzhong, Huang Shu, Zhao Jianfei, et al.. Numerical analysis on fatigue properties of aluminum alloy induced by laser shock peening［J］. Chinese J Lasers, 2008, 35(11): 1735-1740.

[12] [12] Li Wei, Li Yinghong, He Weifeng, et al.. Development and application of laser shock processing［J］. Laser & Optoelectronics Progress, 2008, 45(12): 15-19.

[13] [13] Li Wei, He Weifeng, Li Yinghong, et al.. Effects of laser shock processing on vibration fatigue properties of K417 material［J］. Chinese J Lasers, 2009, 36(8): 2197-2201.

[14] [14] Luo Xinmin, Zhang Jingwen, Zhao Guangzhi, et al.. Effect of laser shock strengthening on fatigue behaviors of 2A02 aluminum alloy［J］. Chinese J Lasers, 2009, 36(12): 3323-3328

[15] [15] Zhang Jie, Gu Xiang, Zhu Le, et al.. Numerical simulation of fatigue life of 7050 aluminum alloy processed by laser shock processing［J］. Chinese J Lasers, 2010, 37(12): 3192-3195.

[16] [16] Yan Hong, Hua Yinqun, Chen Ruifang, et al.. Study on the tribological and wear behavior of FeNi alloy treated by laser shock processing［J］. Chinese J Lasers, 2010, 37(S1): 364-367.

[17] [17] H Amar, V Vignal, H Krawiec, et al.. Influence of the microstructure and laser shock processing (LSP) on the corrosion behavior of the AA2050-T8 aluminium alloy［J］. Corrosion Science, 2011, 53(10): 3215-3221.

[18] [18] H Lim, P Kim, H Jeong, et al.. Enhancement of abrasion and corrosion resistance of duplex stainless steel by laser shock peening［J］. J Materials Processing Technology, 2012, 212(6): 1347-1354.

[19] [19] Wu Xianqian, Huang Chenguang, Song Hongwei. Parameters analysis of residual stress induced by laser shock processing［J］. Chinese J Lasers, 2010, 37(10): 2632-2637.

[20] [20] Chen Jufang, Li Xingcheng, Zhou Jinyu, et al.. Research on corrosion resistance and mechanism of strengthened layer on AM50 Mg alloy surface processed by laser shot peening［J］. Chinese J Lasers, 2011, 38(12): 1203001.

[21] [21] P Peyre, R Fabbro. Laser shock processing: a review of the physics and applications［J］. Opt Quantum Electron, 1995, 27(12): 1213-1229.

[22] [22] Wen Shizhu, Huang Ping. Principles of Tribology［M］. Beijing: Tsinghua University Press, 2008.