[1] Malinauskas M, Žukauskas A, Hasegawa S et al. Ultrafast laser processing of materials: from science to industry[J]. Light: Science & Applications, 5, e16133(2016).

[2] McCarthy J, Minsky M, Rochester N et al. A proposal for the Dartmouth summer research project on artificial intelligence, August 31, 1955[J]. AI Mag., 27, 12-14(2006).

[3] Li P Z, Zheng Y B, Luo L. An ANN based optimization algorithm for diffracted laser beam shaping[J]. Journal of Coastal Research, 104, 255-260(2020).

[4] Wu C S, Ko J, Davis C C. Lossy wavefront sensing and correction of distorted laser beams[J]. Applied Optics, 59, 817-824(2020).

[5] Zhang Y X, Gao X D, Katayama S. Weld appearance prediction with BP neural network improved by genetic algorithm during disk laser welding[J]. Journal of Manufacturing Systems, 34, 53-59(2015).

[6] Anicic O, Jović S, Skrijelj H et al. Prediction of laser cutting heat affected zone by extreme learning machine[J]. Optics and Lasers in Engineering, 88, 1-4(2017).

[7] Solheid J S, Elkaseer A, Wunsch T et al. Multiobjective optimization of laser polishing of additively manufactured Ti-6Al-4V parts for minimum surface roughness and heat-affected zone[J]. Materials, 15, 3323(2022).

[8] Jin Z Q, Zhang Z Z, Demir K et al. Machine learning for advanced additive manufacturing[J]. Matter, 3, 1541-1556(2020).

[9] Li X X, Wang H P, Wang B et al. Machine learning methods for prediction analyses of 4H-SiC microfabrication via femtosecond laser processing[J]. Journal of Materials Research and Technology, 18, 2152-2165(2022).

[10] Baumeister T, Brunton S L, Kutz J N. Deep learning and model predictive control for self-tuning mode-locked lasers[J]. Journal of the Optical Society of America B, 35, 617-626(2018).

[11] Xie Y H, Heath D J, Grant-Jacob J A et al. Deep learning for the monitoring and process control of femtosecond laser machining[J]. Journal of Physics: Photonics, 1, 035002(2019).

[12] Zou L, Geng Y C, Liu G D et al. Energy prediction with physics-guided neural networks for high-power laser facility[J]. Proceedings of SPIE, 12169, 12169BK(2022).

[13] An Y, Li J, Huang L J et al. Deep learning enabled superfast and accurate M2 evaluation for fiber beams[J]. Optics Express, 27, 18683-18694(2019).

[14] Hou T Y, An Y, Chang Q et al. Deep-learning-assisted, two-stage phase control method for high-power mode-programmable orbital angular momentum beam generation[J]. Photonics Research, 8, 715-722(2020).

[15] Buske P, Völl A, Eisebitt M et al. Advanced beam shaping for laser materials processing based on diffractive neural networks[J]. Optics Express, 30, 22798-22816(2022).

[16] Limbacher B, Schoenhuber S, Kainz M A et al. Deep learning control of THz QCLs[J]. Optics Express, 29, 23611-23621(2021).

[17] Lin D F, Li D Y, Cui Y P et al. Machine learning-based error compensation for high precision laser arbitrary beam splitting[J]. Optics and Lasers in Engineering, 160, 107245(2023).

[18] Abdelli K, Rafique D, Pachnicke S. Machine learning based laser failure mode detection[C](2019).

[19] Abdelli K, Grießer H, Pachnicke S. Machine learning based data driven diagnostic and prognostic approach for laser reliability enhancement[C](2020).

[20] Abdelli K, Grießer H, Tropschug C et al. A BiLSTM-CNN based multitask learning approach for fiber fault diagnosis[C](2021).

[21] Wang B, Zhang W L, Shi F et al. Study on the repair technology of laser damage-fused silica optics based on the neural network method[J]. Materials, 15, 5274(2022).

[22] Qiao H M, Peng W N, Jin P X et al. Performance improvement of single-frequency CW laser using a temperature controller based on machine learning[J]. Micromachines, 13, 1047(2022).

[23] Tatzel L, León F P. Image-based roughness estimation of laser cut edges with a convolutional neural network[J]. Procedia CIRP, 94, 469-473(2020).

[24] García A T, Levichev N, Vorkov V et al. Roughness prediction of laser cut edges by image processing and artificial neural networks[J]. Procedia Manufacturing, 54, 257-262(2021).

[25] Courtier A F, McDonnell M, Praeger M et al. Modelling of fibre laser cutting via deep learning[J]. Optics Express, 29, 36487-36502(2021).

[26] Pacher M, Franceschetti L, Strada S C et al. Real-time continuous estimation of dross attachment in the laser cutting process based on process emission images[J]. Journal of Laser Applications, 32, 042016(2020).

[27] Sibalija T, Petronic S, Milovanovic D. Experimental optimization of Nimonic 263 laser cutting using a particle swarm approach[J]. Metals, 9, 1147(2019).

[28] Zhang Y L, Lei J H. Prediction of laser cutting roughness in intelligent manufacturing mode based on ANFIS[J]. Procedia Engineering, 174, 82-89(2017).

[29] Ding H, Wang Z C, Guo Y C. Multi-objective optimization of fiber laser cutting based on generalized regression neural network and non-dominated sorting genetic algorithm[J]. Infrared Physics & Technology, 108, 103337(2020).

[30] Krishnan A, Fang F Z. Review on mechanism and process of surface polishing using lasers[J]. Frontiers of Mechanical Engineering, 14, 299-319(2019).

[31] Wang Y, Wang W, Zhang D B et al. Intelligent laser machining system for multi-function processing of superhard materials[J]. Proceedings of SPIE, 11912, 119120Q(2021).

[32] Li Y H, Cheng X, Guan Y C. Ultrafine microstructure development in laser polishing of selective laser melted Ti alloy[J]. Journal of Materials Science & Technology, 83, 1-6(2021).

[33] Caggiano A, Teti R, Alfieri V et al. Automated laser polishing for surface finish enhancement of additive manufactured components for the automotive industry[J]. Production Engineering, 15, 109-117(2021).

[34] Beyfuss J, Bordatchev E, Tutunea-Fatan O R. Preliminary machine learning analysis and high-speed thermographic visualization of the laser polishing process[J]. Procedia CIRP, 94, 947-950(2020).

[35] Bayhaqi Y A, Hamidi A, Canbaz F et al. Deep-learning-based fast optical coherence tomography (OCT) image denoising for smart laser osteotomy[J]. IEEE Transactions on Medical Imaging, 41, 2615-2628(2022).

[36] Bayhaqi Y A, Hamidi A, Canbaz F et al. Deep learning models comparison for tissue classification using optical coherence tomography images: toward smart laser osteotomy[J]. OSA Continuum, 4, 2510-2526(2021).

[37] Shevchik S, Kenhagho H N, Le-Quang T et al. Machine learning monitoring for laser osteotomy[J]. Journal of Biophotonics, 14, 202000352(2021).

[38] Kenhagho H N, Canbaz F, Gomez Alvarez-Arenas T E et al. Machine learning-based optoacoustic tissue classification method for laser osteotomes using an air-coupled transducer[J]. Lasers in Surgery and Medicine, 53, 377-389(2021).

[39] Seppi C, Huck A, Kenhagho H N et al. Deep-learning approach for tissue classification using acoustic waves during ablation with an Er: YAG laser[J]. IEEE Access, 9, 130543-130553(2021).

[40] Zhang J R, Guan K, Zhang Z et al. In vitro evaluation of ultrafast laser drilling large-size holes on sheepshank bone[J]. Optics Express, 28, 25528-25544(2020).

[41] Song Y, Hu G Q, Zhang Z et al. Real-time spectral response guided smart femtosecond laser bone drilling[J]. Optics and Lasers in Engineering, 128, 106017(2020).

[42] Wang X, Yang M X, Guan Y C et al. Spectrum diagnosis and temperature monitoring of femtosecond laser laminectomy[J]. Optics & Laser Technology, 161, 109091(2023).

[43] Lu L B, Zhang J R, Guan K et al. Artificial neural network for cytocompatibility and antibacterial enhancement induced by femtosecond laser micro/nano structures[J]. Journal of Nanobiotechnology, 20, 365(2022).

[44] Zhang B, Hong K M, Shin Y C. Deep-learning-based porosity monitoring of laser welding process[J]. Manufacturing Letters, 23, 62-66(2020).

[45] Knaak C, Kolter G, Schulze F et al. Deep learning-based semantic segmentation for in-process monitoring in laser welding applications[J]. Proceedings of SPIE, 11139, 1113905(2019).

[46] Cao L C, Zhang L L, Wu Y D. A data-driven model for weld bead monitoring during the laser welding assisted by magnetic field[J]. The International Journal of Advanced Manufacturing Technology, 107, 475-487(2020).

[47] Ma D Y, Jiang P, Shu L S et al. Multi-sensing signals diagnosis and CNN-based detection of porosity defect during Al alloys laser welding[J]. Journal of Manufacturing Systems, 62, 334-346(2022).

[48] You D Y, Gao X D, Katayama S. WPD-PCA-based laser welding process monitoring and defects diagnosis by using FNN and SVM[J]. IEEE Transactions on Industrial Electronics, 62, 628-636(2015).

[49] Chen Y H, Chen B, Yao Y Z et al. A spectroscopic method based on support vector machine and artificial neural network for fiber laser welding defects detection and classification[J]. NDT & E International, 108, 102176(2019).

[50] Sathiya P, Panneerselvam K, Abdul Jaleel M Y. Optimization of laser welding process parameters for super austenitic stainless steel using artificial neural networks and genetic algorithm[J]. Materials & Design, 36, 490-498(2012).

[51] Ai Y W, Jiang P, Shao X Y et al. An optimization method for defects reduction in fiber laser keyhole welding[J]. Applied Physics A, 122, 31(2016).

[52] Cao L C, Yang Y, Jiang P et al. Optimization of processing parameters of AISI 316L laser welding influenced by external magnetic field combining RBFNN and GA[J]. Results in Physics, 7, 1329-1338(2017).

[53] Lu B H, Li D C, Tian X Y. Development trends in additive manufacturing and 3D printing[J]. Engineering, 1, 85-89(2015).

[54] Su J L, Chen L Q, Tan C L et al. Optimization of additive manufacturing process and development of new materials based on machine learning[J]. Chinese Journal of Lasers, 49, 1402101(2022).

[55] Tan C L, Li Q, Yao X L et al. Machine learning customized novel material for energy-efficient 4D printing[J]. Advanced Science, 10, 2206607(2023).

[56] Jiang L, Wang C S, Fu H D et al. Discovery of aluminum alloys with ultra-strength and high-toughness via a property-oriented design strategy[J]. Journal of Materials Science & Technology, 98, 33-43(2022).

[57] Zou C X, Li J S, Wang W Y et al. Integrating data mining and machine learning to discover high-strength ductile titanium alloys[J]. Acta Materialia, 202, 211-221(2021).

[58] Li J H, Sage M, Guan X Y et al. Machine learning-enabled competitive grain growth behavior study in directed energy deposition fabricated Ti6Al4V[J]. JOM, 72, 458-464(2020).

[59] Kusano M, Miyazaki S, Watanabe M et al. Tensile properties prediction by multiple linear regression analysis for selective laser melted and post heat-treated Ti-6Al-4V with microstructural quantification[J]. Materials Science and Engineering: A, 787, 139549(2020).

[60] Zhang F Y, Tan H, Chen J et al. Mechanical properties of laser solid formed Ti-Al-V ternary system titanium alloys[J]. Chinese Journal of Lasers, 39, 0603004(2012).

[61] Kats D, Wang Z D, Gan Z T et al. A physics-informed machine learning method for predicting grain structure characteristics in directed energy deposition[J]. Computational Materials Science, 202, 110958(2022).

[62] Gui Y W, Aoyagi K, Bian H K et al. Detection, classification and prediction of internal defects from surface morphology data of metal parts fabricated by powder bed fusion type additive manufacturing using an electron beam[J]. Additive Manufacturing, 54, 102736(2022).

[63] Shin D S, Lee C H, Kühn U et al. Optimizing laser powder bed fusion of Ti-5Al-5V-5Mo-3Cr by artificial intelligence[J]. Journal of Alloys and Compounds, 862, 158018(2021).

[64] Song C H, Liu L S, Yang Y Q et al. Prediction on geometrical characteristics of laser energy deposition based on regression equation and neural network[J]. IFAC-PapersOnLine, 53, 89-96(2020).

[65] Li Q, Li T, Wu Z P et al. Prediction of laser cladding layer area and porosity based on neural network[J]. Applied Laser, 40, 29-34(2020).

[66] Scime L, Beuth J. Using machine learning to identify in situ melt pool signatures indicative of flaw formation in a laser powder bed fusion additive manufacturing process[J]. Additive Manufacturing, 25, 151-165(2019).

[67] Zhang B, Liu S Y, Shin Y C. In-Process monitoring of porosity during laser additive manufacturing process[J]. Additive Manufacturing, 28, 497-505(2019).

[68] Caggiano A, Zhang J J, Alfieri V et al. Machine learning-based image processing for on-line defect recognition in additive manufacturing[J]. CIRP Annals, 68, 451-454(2019).

[69] Zhang Y J, Soon H G, Ye D S et al. Powder-bed fusion process monitoring by machine vision with hybrid convolutional neural networks[J]. IEEE Transactions on Industrial Informatics, 16, 5769-5779(2020).