[1] [1] Liu Xiaomei, Xiang Yang. Research and design of telecentric off-axis three-mirror system with real entrance pupil[J]. Acta Optica Sinica, 2011, 31(11): 1122002.

[2] [2] Zhang Xiaofei, Chen Lizi, Du Shaojun. Optical system design of off-axis three-mirror camera with resolution of 1 m[J]. Laser & Optoelectronics Progress, 2013, 50(6): 062204.

[3] [3] Wu Jianfen, Zhao Lei, Chen Yongyan, et al.. Flat-field concave holographic grating with broad spectral region and high resolution[J]. Acta Optica Sinica, 2012, 32(4): 0409002.

[4] [4] Hu Dawei, Li Yanqiu, Liu Xiaolin. Optical design of hyper numerical-aperture Schwarzschild projection lithographic lens[J]. Acta Optica Sinica, 2013, 33(1): 0122004.

[5] [5] Tian Wei, Wang Ping, Wang Rudong, et al.. Simulation and experimental research of 193 nm projection lithography lens supporting[J]. Chinese J Lasers, 2012, 39(8): 0816002.

[6] [6] Wang Xiaokun, Wang Lihui, Deng Weijie, et al.. Measurement of large aspheric mirrors by non-null testing[J]. Optics and Precision Engineering, 2011, 19(3): 520-528.

[7] [7] Liu Dong, Yang Yongying, Tian Chao, et al.. Analysis and correction of retrace error for nonnull aspheric testing[J]. Acta Optica Sinica, 2009, 29(3): 688-696.

[8] [8] Lance D Lund. Direct contact profilometry of large aspherics[C]. SPIE, 1986, 645: 75-79.

[9] [9] P Su, J O Chang, E P Robert, et al.. Swing-arm optical CMM for aspherics[C]. SPIE, 2009, 7426: 74260J.

[10] [10] Wang Xiaokun, Zheng Ligong, Zhang Xuejun. Testing convex aspheres by subaperture stitching interferometry[J]. Acta Optica Sinica, 2010, 30(7): 2022-2026.

[11] [11] Yatagai T, Kanou T. Aspherical surface testing with shearing interferometer using fringe scanning detection method[J]. Opt Eng, 1984, 23(4): 357-360.

[12] [12] Fan Qi, Yang Hongru, Li Gaoping, et al.. Method for phase recovery from a single undersampled wrapped phase map[J]. Acta Optica Sinica, 2011, 31(3): 0310002.

[13] [13] J C Wyant, V P Bennett. Using computer generated holograms to test aspheric wavefronts[J]. Appl Opt, 1972, 11(12): 2833-2839.

[14] [14] J C Wyant, P K O Neill. Computer generated hologram: null lens of aspheric wavefronts[J]. Appl Opt, 1974, 13(12): 2762-2765.

[15] [15] Hua Liu, Zhenwu Lu, Fengyou Li, et al.. Design of a novel hologram for full measurement of large and deep convex aspheric surfaces[J]. Opt Express, 2007, 15(6): 3120-3126.

[16] [16] Chen Xu, Liu Weiqi, Kang Yusi, et al.. Design and tolerance analysis of Offner compensator[J]. Optics and Precision Engineering, 2010, 18(1): 88-93.

[17] [17] Meng Xiaochen, Hao Qun, Zhu Qiudong, et al.. Optimization design of partially compensating lens based on Zemax[J]. Acta Optica Sinica, 2011, 31(6): 0622002.

[18] [18] Yang Baoxi, Yuan Qiao, Zeng Aijun, et al.. Method of Asphere Surface Testing[P]. Chinese: 103134442A.[2013-06-07].

[19] [19] Pan Junhua. The Design, Manufacture and Test of the Aspherical Optical Surface[M]. Suzhou: Soochow University Press, 2004. 5.

[20] [20] Chen Qinfang, Li Yingcai, Ma Zhen, et al.. Alignment of off-axis conic aspheric mirrors in stigmatic null test[J]. Acta Optica Sinica, 2011, 31(2): 0222001.