[1] BOARD S S. National academies of sciences, engineering, and medicine. thriving on our changing planet: a decadal strategy for earth observation from space[M](2019).

[2] YU Jinpei[M]. Modern small satellite technology and application(2004).

[3] CHENG Liangliang, XIE Chenbo, YANG Hao et al. Observation and analysis of a haze pollution event in Beijing by spaceborne and ground-based lidars[J]. Acta Photonica Sinica, 51, 0301001(2022).

[4] WU Jueren. A study on military application of U.S. commercial remote sensing satellites[D](2019).

[5] WU Jun, LI Na, YUE Chunyu et al. Method for in-orbit optical axis pointing calibration of micro-nano remote sensing camera[J]. Acta Photonica Sinica, 48, 0912001(2019).

[6] KE Zhifei, HUANG Shisheng, LI Yuliang et al. Research on the development status and key technologies of large LEO remote sensing constellations[J]. Spacecraft Recovery & Remote Sensing, 44, 93-101(2023).

[7] FANG Chao, XIANG Yang. Design of centering system by using collimation and interference with two channels[J]. Acta Photonica Sinica, 41, 1180-1185(2012).

[8] HUANG Yang, ZHAO Yinglong, ZHANG Shengjie et al. Alignment technology for infrared refractive lens based on high performance[J]. Infrared and Laser Engineering, 52, 20220790(2023).

[9] YUAN Qun, GAO Zhishan, ZHU Dan. Applying slope constrained Qbfs aspheres for asphericity redistribution in the design of infrared transmission spheres[J]. Applied Optics, 54, 6857-6864(2015).

[10] TRIOPICS Gmbh[G]. OptiCentric, inspection, alignment, cementing and assembly of optics(2012).

[11] ZHANG Qiang. Study on the automatic measurement technology of optical lens eccentricity error[D](2018).

[12] LI Xiang. Research on optical centering assembly reflective and measuring system[D](2019).

[13] WANG Huibin. Development of precision automatic adjusting system for micro thread[D](2021).

[14] REN Guorui, LI Chuang, WANG Wei et al. Structural design of carbon fiber-reinforced plastics barrel for space remote sensing camera[J]. Acta Photonica Sinica, 48, 0822001(2019).

[15] SONG Weiyang, XIE Peng, WANG Xun. Design of lightweight split support structure for large space off-axis three mirror camera[J]. Optics and Precision Engineering, 29, 571-581(2021).

[16] GAO Chao, LUO Shikui, CHEN Fang et al. Young's modulus determination and selection for XM23 glue used in space camera optics[J]. Spacecraft Recovery & Remote Sensing, 38, 48-54(2017).

[17] SONG Xiaopeng, GONG Xiaoxue, ZHANG Lei et al. Carbon fiber thin-walled cylindrical support structure between primary and secondary mirror in space camera[J]. Optics and Precision Engineering, 30, 1429-1439(2022).

[18] YAN Junhua, HU Zijia, ZHU Deyan et al. Design of compact off-axis three-mirror afocal system based on freeform surface[J]. Acta Photonica Sinica, 51, 0511002(2022).

[19] GU Zhiyuan, YAN Changxiang, LI Xiaobing et al. Application of modified sensitivity matrix method in alignment of off-axis telescope[J]. Optics and Precision Engineering, 23, 2595-2604(2015).