[1] [1] ABBASI F, MIRZADEH H, KATBAB A. Modification of polysiloxane polymers for biomedical applications: A review[J]. Polymer International, 2001, 50(12): 1279-1287.

[2] [2] KANT M B, SHINDE S D, BODAS D, et al. Surface studies on benzophenone doped PDMS microstructures fabricated using KrF excimer laser direct write lithography[J]. Applied Surface Science, 2014, 314(30): 292-300.

[3] [3] AMID S, SHADMAN K, TOHID F D. Conventional and emerging strategies for the fabrication and functionalization of PDMS-based microfluidic devices[J]. Lab on a Chip, 2021, 21(16): 3053-3075.

[5] [5] GAO K P, LI G, LIAO L N, et al. Fabrication of flexible microelectrode arrays integrated with microfluidic channels for stable neural interfaces[J]. Sensors and Actuators, 2013, A197(1): 9-14.

[6] [6] ABDULHUSSEIN A T, KANNARPDDY G K, WRIGHT A B, et al. Current trend in fabrication of complex morphologically tunable superhydrophobic nano scale surfaces[J]. Applied Surface Science, 2016, 384(30): 311-332.

[7] [7] LIU Y Sh, ZHANG P, DENG Y B, et al. Polymeric microlens array fabricated with PDMS mold-based hot embossing[J]. Journal of Micromechanics and Microengineering, 2014, 24(9): 095028.

[8] [8] DENG Y, HONG W Sh, HE J F, et al. Micro-cracks on crosslinked poly (dimethylsiloxane) (PDMS) surface treated by nanosecond laser irradiation[J]. Applied Surface Science, 2018, 445(1): 488-495.

[10] [10] YAN Zh B, HUANG X Y, YANG Ch. Rapid prototyping of single-layer microfluidic PDMS devices with abrupt depth variations under non-clean-room conditions by using laser ablation and UV-curable polymer[J]. Microfluidics and Nanofluidics, 2017, 21(6): 108.

[11] [11] HOHNHOLZ A, OBATA K, NAKAJIMA Y, et al. Hybrid UV laser direct writing of UV-curable PDMS thin film using aerosol jet printing[J]. Applied Physics, 2019, A125(2): 120-125.

[13] [13] CHEUNG K C. Implantable microscale neural interfaces[J]. Biomedical Microdevices, 2007, 9(6): 923-938.

[15] [15] HA K H, LEE S W, KIM J G, et al. Fabrication of a micro-hole array on metal foil by nanosecond pulsed laser beam machining using a cover plate[J]. Journal of Micromechanics and Microengineering, 2015, 25(2): 027001.

[17] [17] WANG M J, ZHANG Y, BIN J X, et al. Cold laser micro-machining of PDMS as an encapsulation layer for soft implantable neural interface[J]. Micromachines, 2022, 13(9): 1484.

[18] [18] GRAUBNER V M, NUYKEN O, LIPPERT T, et al. Local chemical transformations in poly (dimethylsiloxane) by irradiation with 248 and 266 nm[J]. Applied Surface Science, 2006, 252(13): 4781-4785.

[19] [19] LI X X, GUAN Y Ch. Theoretical fundamentals of short pulse laser-metal interaction: A review[J]. Nanotechnology and Precision Engineering, 2020, 3(3): 105-125.

[20] [20] ZHANG X F, YAO Zh Q, HOU Zh B, et al. Processing and profile control of microhole array for PDMS mask with femtosecond laser[J]. Micromachines, 2022, 13(2): 340.