[1] [1] Zhang Huaiwu. The Principle and Technology of Modern Printed Circuit Technology [M]. Beijing: China Machine Press, 2006

[2] [2] Chen Bing, Chai Zhiqiang. Flexible Printed Circuit Technology [M]. Beijing: Science Press, 2005

[3] [3] Wang Shaofei, Cao Yu, Wang Xiaobao et al.. Microheater array fabrication by laser micro-cladding method [J]. Chinese J. Lasers, 2007, 34(11):1567～1570

[4] [4] Li Huiling, Zeng Xiaoyan. Effect of subsequently sintered processing on properties of thick-film resistor directly fabricated by laser micro-cladding [J]. Chinese J. Lasers, 2006, 33(4):570～576

[5] [5] Lei Junpeng. A study of direct writing conductive lines by laser etching[D]. Master’s dissertation, Wuhan: Huazhong University of Science & Technology, 2004

[6] [6] Wang Hongjie, Guo Wengang, Dong Zhaohui et al.. Application of laser etching technology[J]. Infrared and Laser Engineering, 2004, 33(5):469～472

[7] [7] Shi Zhaohui, Fan Zhongwei, Zhang Ying et al.. High efficiency and high power all-solid-state ultraviolet laser [J]. Chinese J. Lasers, 2007, 34(1):27～30

[8] [8] Wan Yunfang, Han Kezhen, Zuo Chunhua et al..An efficient diode-pumped Nd:YAG/LBO triple-frequency UV laser [J]. Acta Photonica Sinica, 2007, 36(12):2182～2186

[9] [9] Lü Yanfei, Zhang Xihe, Yao Zhihai et al.. Laser-diode pumped all-solid-state continuous-wave ultraviolet laser at 355 nm [J]. Chinese J. Lasers, 2007, 34(8):1048～1050

[10] [10] Yutong Feng, Junqing Meng, Weibiao Chen. High repetition rate, compact micro-pulse all-solid-state laser [J]. Chin. Opt. Lett., 2007, 5(11):648～650

[11] [11] Tao Li, Zhuang Zhuo, Xiaomin Li et al.. Study on optical characteristics of Nd:YVO4/YVO4 composite crystal laser [J]. Chin. Opt. Lett., 2007, 5(3):175～177

[12] [12] Yang Jianhua, Zhang Shuai, Chen Jimin. Experimental research on high power UV laser cutting Cu membrane [J]. Applied Laser, 2005, 25(5):289～292

[13] [13] Ling Lei, Lou Qihong, Ye Zhenghuan et al.. Ablation of circuit board by pulsed UV laser [J]. Chinese J. Lasers, 2003, 30(10):953～955

[14] [14] J. G. Kim, W. S. Chang, K. K. Yoon et al.. Micro-drilling of PCB substrate using DPSS 3rd harmonic laser [C]. SPIE, 2003, 4830:105～109

[15] [15] Norman Hodgson, Mingwei Li, Andrew Held et al.. Diode-pumped TEM00 mode solid state lasers and their micromachining applications [C]. SPIE, 2003, 4977:281～294

[16] [16] Weisheng Lei, John Davignon. Solid state UV laser technology for electronic packaging applications [C]. SPIE, 2005, 5629:314～326

[17] [17] Rajesh S. Patel, James Bovatsek. Processing benefits of high repetition rate and high average power 355 nm laser for micromachining of microelectronics packaging materials [C]. SPIE, 2007, 6459:64590H

[18] [18] Bin Zhang, K.C. Yung. Frequency-tripled Nd:YAG laser ablation in laser structuring process [J]. Optics and Lasers in Engineering, 2006, 44:815～825

[19] [19] D. W. Zeng, K. C. Yung, C. S. Xie. UV Nd:YAG laser ablation of copper: chemical states in both crater and halo studied by XPS [J]. Applied Surface Science, 2003, 217:170～180