[1] [1] Huang Fengxiao,Chen Li,Liu Ximing et al.. Microstructure and property of multirun laser cladding Fe-base alloy [J]. Hot Working Technology,2007,36(23):57-60

[2] [2] Si Songhua,Chen Juan,Ding Xiaoli et al.. Microstructure and properties of laser cladding Cr3C2/Fe composite coatings[J]. Journal of Anhui University of Technology,2008,25(4):367-370

[3] [3] Xiao Yifeng,Chen Yu,Gong Jianxun et al.. Microstructure and properties of wear-resistant deposited metal of flux-cored wire with Fe-Cr-C system [J]. Hot Working Technology,2008,37(11):1-3

[4] [4] Wang Xinhong,Han Fang,Liu Xuemei et al.. Microstructure and wear properties of the Fe-Ti-V-Mo-C hardfacing alloy [J]. Wear,2008,265(5-6):583-589

[5] [5] Wang Zhihui,He Dingyong,Wang Yueqin. The effect of boron on the microstructures of Fe-Cr-C hardfacing alloy [J]. Journal of Materials Engineering,2001,(10):18-20

[6] [6] Zhang Xianhu,Chao Mingju,Liang Erjun et al.. In-situ synthesis of TiC-ZrC particulate reinforced Ni-based composite coatings by laser cladding [J]. Chinese J. Lasers,2009,36(4):998-1004

[7] [7] Xu Gang,Li Jun,Xiao Xueshan et al.. Effect of boron on hot workability,structure and mechanical properties of austenite heat resistant steel TP347H [J]. Special Steel,2008,29(2):23-25

[8] [8] Liu Zhi′en. Fundamentals of Material Science [M]. Xi′an:Northwestern Polytechnical University Press,2004,153-155

[9] [9] Zhang Weiping,Liu Zhonghua. Study on microstructure of in-situ synthesis of TiC-Cr7C3-Ti-Ni metal-ceramics composite coating [J]. Chinese J. Lasers,2008,35(7):1091-1094

[10] [10] Zhao Zhenhua,Chen Weiqing,Yuan Hui et al.. Effect of boron on grain size of low-carbon steel [J]. Iron and Steel,2006,41(3):85-87

[11] [11] Du Baoshuai,Li Qingming,Wang Xinhong et al.. In-situ synthesis of TiC-VC particles reinforced Fe-based metal matrix composite coating by laser cladding [J]. Transactions of the China Welding Institution,2007,28(4):65-68

[12] [12] Du Baoshuai,Zou Zengda,Wang Xinhong et al.. Investigation on phase constituents and microstructure of in-situ Fe-Ti-B composite coatings fabricated by laser cladding [J]. Transactions of Materials and Heat Treatment,2008,29(10):134-138

[13] [13] He Qingkun,Wang Yong,Zhao Weimin et al.. Interface microstructure and wear properties of TiC-Ni-Mo coatings prepared by in-situ fabrication of laser cladding [J]. Transactions of the China Welding Institution,2009,30(1):77-80

[14] [14] Wang Ling,Chen Zhigang,Zhu Xiaorong et al.. Effects of laser remelting on wear resistance of Ni-WC composite coatings by flame-spraying [J]. Chinese J. Lasers,2008,35(2):281-286

[15] [15] Jing Xiaoding,Chao Mingju,Sun Haiqin et al.. Investigation on in-situ synthesis of Cr3C2-CrB reinforced Ni-based composite coatings by laser cladding [J]. Chinese J. Lasers,2009,36(1):231-237