Journal of the Chinese Ceramic Society, Volume. 53, Issue 5, 1236(2025)

Tensile Performance Evolution of Cracked Ultra-High-Performance Concrete Under Freeze-Thaw Conditions

LIN Xun1, ZHAO Mengjia1, CHEN Can1, ZHANG Hongrui1, ZHONG Rui1, WANG Jingquan2,3, and YAO Yiming1,4
Author Affiliations
  • 1School of Civil Engineering, Southeast University, Nanjing 211189, China
  • 2Faculty of Civil Engineering and Mechanics, Jiangsu University, Zhenjiang 212013, Jiangsu, China
  • 3State Key Laboratory of Safety, Durability and Healthy Operation of Long Span Bridges, Nanjing 210096, China
  • 4Heilongjiang Province Academy of Cold Area Building Research, Harbin 150080, China
  • show less
    References(25)

    [1] [1] SHI C, WU Z, XIAO J, et al. A review on ultra high performance concrete: Part I. Raw materials and mixture design[J]. Constr Build Mater, 2015, 101: 741-751.

    [6] [6] XI B, AL-OBAIDI S, FERRARA L. Effect of different environments on the self-healing performance of ultra high-performance concrete-A systematic literature review[J]. Constr Build Mater, 2023, 374: 130946.

    [7] [7] ZHENG Q M, LI C, SONG F C, et al. Autogenous self-healing of ultra-high-performance fiber-reinforced concrete with varying silica fume dosages: Secondary hydration and structural regeneration[J]. Cem Concr Compos, 2023, 137: 104905.

    [9] [9] ALDEA C M, SONG W J, POPOVICS J S, et al. Extent of healing of cracked normal strength concrete[J]. J Mater Civ Eng, 2000, 12(1): 92-96.

    [10] [10] DE ROOIJ M, VAN TITTELBOOM K, DE BELIE N, et al. Self-Healing Phenomena in Cement-Based Materials: State-of-the-Art Report of RILEM Technical Committee 221-SHC: Self-Healing Phenomena in Cement-Based Materials[M]. Dordrecht: Springer Netherlands, 2013

    [12] [12] ALEX A, FREEMAN B, JEFFERSON A, et al. Carbonation and self- healing in concrete: Kinetic Monte Carlo simulations of mineralization[J]. Cem Concr Compos, 2023, 144: 105281.

    [13] [13] YLDRM G, KESKIN K, KESKIN S B, et al. A review of intrinsic self-healing capability of engineered cementitious composites: Recovery of transport and mechanical properties[J]. Constr Build Mater, 2015, 101: 10-21.

    [14] [14] SISOMPHON K, COPUROGLU O, KOENDERS E A B. Self-healing of surface cracks in mortars with expansive additive and crystalline additive[J]. Cem Concr Compos, 2012, 34(4): 566-574.

    [15] [15] KIM D J, KANG S H, AHN T H. Mechanical characterization of high-performance steel-fiber reinforced cement composites with self-healing effect[J]. Materials, 2014, 7(1): 508-526.

    [16] [16] GUO J C, WANG J Y, WU K. Effects of self-healing on tensile behavior and air permeability of high strain hardening UHPC[J]. Constr Build Mater, 2019(20):342-356.

    [17] [17] FERRARA L, KRELANI V, MORETTI F, et al. Effects of autogenous healing on the recovery of mechanical performance of high performance fibre reinforced cementitious composites (HPFRCCs): Part 1[J]. Cem Concr Compos, 2017, 83: 76-100.

    [18] [18] XU D S, TANG J H, HU X, et al. The influence of curing regimes on hydration, microstructure and compressive strength of ultra-high performance concrete: A review[J]. J Build Eng, 2023, 76: 107401.

    [20] [20] GU C P, SUN W, GUO L P, et al. Effect of curing conditions on the durability of ultra-high performance concrete under flexural load[J]. J Wuhan Univ Technol Mater Sci Ed, 2016, 31(2): 278-285.

    [21] [21] ZHOU Z D, QIAO P Z. Durability of ultra-high performance concrete in tension under cold weather conditions[J]. Cem Concr Compos, 2018, 94: 94-106.

    [23] [23] SMARZEWSKI P, BARNAT-HUNEK D. Effect of fiber hybridization on durability related properties of ultra-high performance concrete[J]. Int J Concr Struct Mater, 2017, 11(2): 315-325.

    [25] [25] WANG F, KAN L L, YU J T, et al. Systematic studies on behaviors of ultra-high performance concrete subject to freezing and thawing cycles combining DIC technology[J]. Constr Build Mater, 2023, 388: 131580.

    [28] [28] AN M Z, WANG Y, YU Z R. Damage mechanisms of ultra- high-performance concrete under freeze-thaw cycling in salt solution considering the effect of rehydration[J]. Constr Build Mater, 2019, 198: 546-552.

    [29] [29] LU Z, FENG Z G, YAO D D, et al. Freeze-thaw resistance of ultra-high performance concrete: Dependence on concrete composition[J]. Constr Build Mater, 2021, 293: 123523.

    [31] [31] WU C J, MA Z P, WANG D Z, et al. Influence in the mechanical properties and salt erosion resistance of recycled sand UHPC made from fly ash content[J]. J Build Eng, 2024, 96: 110337.

    [32] [32] KAN L L, WANG F, ZHANG Z, et al. Mechanical properties of high ductile alkali-activated fiber reinforced composites with different curing ages[J]. Constr Build Mater, 2021, 306: 124833.

    [33] [33] YOO D Y, SHIN W, CHUN B, et al. Assessment of steel fiber corrosion in self-healed ultra-high-performance fiber-reinforced concrete and its effect on tensile performance[J]. Cem Concr Res, 2020, 133: 106091.

    [34] [34] YOO D Y, SHIN W, BANTHIA N. Corrosion of partially and fully debonded steel fibers from ultra-high-performance concrete and its influence on pullout resistance[J]. Cem Concr Compos, 2021, 124: 104269.

    [35] [35] VEDALAKSHMI R, SUNDARA RAJ A, SRINIVASAN S, et al. Quantification of hydrated cement products of blended cements in low and medium strength concrete using TG and DTA technique[J]. Thermochim Acta, 2003, 407(1/2): 49-60.

    [36] [36] TRIVEDI S S, SARANGI D, DAS B B, et al. Influence of multi-stage processing and mechano-chemical treatments on the hydration and microstructure properties of recycled aggregate concrete[J]. Constr Build Mater, 2023, 409: 133993.

    [37] [37] ZHONG R, AI X B, PAN M Y, et al. Durability of micro-cracked UHPC subjected to coupled freeze-thaw and chloride salt attacks[J]. Cem Concr Compos, 2024, 148: 105471

    Tools

    Get Citation

    Copy Citation Text

    LIN Xun, ZHAO Mengjia, CHEN Can, ZHANG Hongrui, ZHONG Rui, WANG Jingquan, YAO Yiming. Tensile Performance Evolution of Cracked Ultra-High-Performance Concrete Under Freeze-Thaw Conditions[J]. Journal of the Chinese Ceramic Society, 2025, 53(5): 1236

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category:

    Received: Nov. 6, 2024

    Accepted: May. 29, 2025

    Published Online: May. 29, 2025

    The Author Email:

    DOI:10.14062/j.issn.0454-5648.20240714

    Topics