[1] Wang Huaming. Materials' fundamental issues of laser additive manufacturing for high-performance large metallic components[J]. Acta Aeronauticaet Astronautica Sinica, 35, 2690-2698(2014).

[2] Bandyopadhyay A, Bose S[M]. Additive manufacturing, 104(2016).

[3] Gu D D, Meiners W, Wissenbach K et al. Laser additive manufacturing of metallic components: materials, processes and mechanisms[J]. International Materials Reviews, 57, 133-164(2012). http://www.tandfonline.com/doi/full/10.1179/1743280411Y.0000000014

[4] Courouau J L, Trabuc P, Laplanche G et al. Impurities and oxygen control in lead alloys[J]. Journal of Nuclear Materials, 301, 53-59(2002). http://www.sciencedirect.com/science/article/pii/S0022311501007267

[5] Baltes N, Beyle F, Freiner S. et al. Trace detection of oxygen-ionic liquids in gas sensor design[J]. Talanta, 116, 474-481(2013). http://europepmc.org/abstract/med/24148432

[6] Baleizão C, Nagl S, Schäferling M. et al. Dual fluorescence sensor for trace oxygen and temperature with unmatched range and sensitivity[J]. Analytical Chemistry, 80, 6449-6457(2008). http://pubs.acs.org/doi/pdf/10.1021/ac801034p

[7] Zhou X, Yu J, Wang L. et al. Sensitive detection of oxygen using a diffused integrating cavity as a gas absorption cell[J]. Sensors and Actuators B, 241, 1076-1081(2017). http://www.sciencedirect.com/science/article/pii/S0925400516316598

[8] Zhou Sheng, Han Yanling. Li Bincheng. Trace moisture measurement with 5.2 μm quantum cascade laser based continuous-wave cavity ring-down spectroscopy[J]. Spectroscopy and Spectral Analysis, 36, 3848-3852(2016).

[9] Yan Hengfeng. Key techniques research on SLM 3D printing equipment for dental application[D]. Beijing: Beijing University of Technology(2016).

[10] Read N, Wang W, Essa K et al. Selective laser melting of AlSi10Mg alloy: process optimisation and mechanical properties development[J]. Materials & Design, 65, 417-424(2015). http://www.sciencedirect.com/science/article/pii/S0261306914007468

[11] Niu H J. Chang I T H. Selective laser sintering of gas atomized M2 high speed steel powder[J]. Journal of Materials Science, 35, 31-38(2000). http://link.springer.com/article/10.1023/A%3A1004720011671

[12] Zhang B C, Dembinski L, Coddet C. The study of the laser parameters and environment variables effect on mechanical properties of high compact parts elaborated by selective laser melting 316L powder[J]. Materials Science and Engineering, 584, 21-31(2013). http://www.sciencedirect.com/science/article/pii/S0921509313007065

[13] Schlenka J, Hildebrand L, Moros J. et al. Adaptive approach for variable noise suppression on laser-induced breakdown spectroscopy responses using stationary wavelet transform[J]. Analytical Chimica Acta, 754, 8-19(2012). http://www.ncbi.nlm.nih.gov/pubmed/23140949

[14] Zhang B, Sun L X, Yu H B. et al. A method for improving wavelet threshold denoising in laser-induced breakdown spectroscopy[J]. Spectrochimica Acta Part B, 107, 32-44(2015). http://www.sciencedirect.com/science/article/pii/S0584854715000634

[15] Yu Yang, Zhao Nanjing, Wang Yin et al. Research on the characteristics of lead contained in lead slime by laser-induced breakdown spectroscopy[J]. Chinese J Lasers, 41, 0715001(2014).

[16] Bastiaans G J, Mangold R A. The calculation of electron density and temperature in Ar spectroscopic plasmas from continuum and line spectra[J]. Spectrochimica Acta Part B, 40, 885-892(1985). http://www.sciencedirect.com/science/article/pii/0584854785800598

[17] Moon H Y, Smith B W, Omenetto N. Temporal behavior of line-to-continuum ratios and ion fractions as a means of assessing thermodynamic equilibrium in laser-induced breakdown spectroscopy[J]. Chemical Physics, 398, 221-227(2012). http://www.sciencedirect.com/science/article/pii/S0301010411002825

[18] Zhang B, Yu H B, Sun L X. et al. A method for resolving overlapped peaks in laser-induced breakdown spectroscopy (LIBS)[J]. Applied Spectroscopy, 67, 1087-1097(2013). http://www.ncbi.nlm.nih.gov/pubmed/24067641

[20] Gold K, Loening K L. McNaught A D, et al. Compendium of chemical terminology: IUPAC recommendations[M]. Oxford: Blackwell Scientific Publicaitons(1987).

[21] Yalcin S, Crosley D R, Smith G P. et al. Influence of ambient conditions on the laser air spark[J]. Applied Physics B, 68, 121-130(1999). http://link.springer.com/article/10.1007/s003400050596

[22] Sun Yanna, Man Baoyuan, Gao Xun et al. Time evolution characteristics of Zn plasma spectra induced by femtosecond laser[J]. Chinese J Lasers, 43, 0115002(2016).

[23] Griem H R[M]. Spectral line broadening by plasmas, 350(1974).

[24] Harilal S S, Bindhu C V. Nampoori V P N, et al. Influence of ambient gas on the temperature and density of laser produced carbon plasma[J]. Applied Physics Letters, 72, 167-169(1998). http://scitation.aip.org/content/aip/journal/apl/72/2/10.1063/1.120602

[25] Iida Y. Effects of atmosphere on laser vaporization and excitation processes of solid samples[J]. Spectrochimica Acta Part B, 45, 1353-1367(1990). http://www.sciencedirect.com/science/article/pii/058485479080188O

[26] Rumsby P T. Paul J W M. Temperature and density of an expanding laser produced plasma[J]. Plasma Physics, 16, 247-260(1974). http://adsabs.harvard.edu/abs/1974PlPh...16..247R