[1] [1] CAO M S, WANG X X, ZHANG M, et al. Electromagnetic response and energy conversion for functions and devices in low-dimensional materials[J]. Adv Funct Mater, 2019, 29(25): 1807398.

[2] [2] ZHOU X F, JIA Z R, ZHANG X X, et al. Controllable synthesis of Ni/NiO@porous carbon hybrid composites towards remarkable electromagnetic wave absorption and wide absorption bandwidth[J]. J Mater Sci Technol, 2021, 87: 120–132.

[3] [3] LIU T T, CAO M Q, FANG Y S, et al. Green building materials lit up by electromagnetic absorption function: A review[J]. J Mater Sci Technol, 2022, 112: 329–344.

[5] [5] MENG F B, WANG H G, HUANG F, et al. Graphene-based microwave absorbing composites: A review and prospective[J]. Compos Part B Eng, 2018, 137: 260–277.

[6] [6] ZHANG Y F, HAO W J, DUAN Y P, et al. Electromagnetic wave absorption properties of cement filled with carbon black[J]. Appl Mech Mater, 2014, 496–500: 2431–2434.

[7] [7] WEI Y L, ZHANG Y F, HAO W J. Electromagnetic wave absorption properties of glass fiber reinforced cement filled with carbon black[J]. Adv Mater Res, 2014, 912–914: 127–130.

[8] [8] DAI Y W, SUN M Q, LIU C G, et al. Electromagnetic wave absorbing characteristics of carbon black cement-based composites[J]. Cem Concr Compos, 2010, 32(7): 508–513.

[9] [9] CAO M S, SONG W L, HOU Z L, et al. The effects of temperature and frequency on the dielectric properties, electromagnetic interference shielding and microwave-absorption of short carbon fiber/silica composites[J]. Carbon, 2010, 48(3): 788–796.

[10] [10] LI K, WANG C, LI H, et al. Study on the electromagnetic interference of CFRC composites by reflectivity[J]. J Mater Sci Technol, 2008, 24(2): 265–271.

[11] [11] LI K, WANG C, LI H, et al. Effect of chemical vapor deposition treatment of carbon fibers on the reflectivity of carbon fiber-reinforced cement-based composites[J]. Compos Sci Technol, 2008, 68(5): 1105–1114.

[13] [13] WANG Z J, LI K Z, WANG C. Freezing–thawing effects on electromagnetic wave reflectivity of carbon fiber cement based composites[J]. Constr Build Mater, 2014, 64: 288–292.

[14] [14] WEN B, CAO M S, HOU Z L, et al. Temperature dependent microwave attenuation behavior for carbon-nanotube/silica composites[J]. Carbon, 2013, 65: 124–139.

[15] [15] WANG B M, GUO Z Q, HAN Y, et al. Electromagnetic wave absorbing properties of multi-walled carbon nanotube/cement composites[J]. Constr Build Mater, 2013, 46: 98–103.

[16] [16] NAM I W, CHOI J H, KIM C G, et al. Fabrication and design of electromagnetic wave absorber composed of carbon nanotube-incorporated cement composites[J]. Compos Struct, 2018, 206: 439–447.

[17] [17] SUN S W, DING S Q, HAN B G, et al. Multi-layer graphene-engineered cementitious composites with multifunctionality/intelligence[J]. Compos Part B Eng, 2017, 129: 221–232.

[19] [19] YAN J, WANG Y, LIU W J, et al. Two-dimensional metal organic framework derived nitrogen-doped graphene-like carbon nanomesh toward efficient electromagnetic wave absorption[J]. J Colloid Interface Sci, 2023, 643: 318–327.

[21] [21] STEFANIUK D, SOBTKA M, JARCZEWSKA K, et al. Microstructure properties of cementitious mortars with selected additives for electromagnetic waves absorbing applications[J]. Cem Concr Compos, 2022, 134: 104732.

[27] [27] WANG D, YANG P, HOU P K, et al. Cement-based composites endowed with novel functions through controlling interface microstructure from Fe3O4@SiO2 nanoparticles[J]. Cem Concr Compos, 2017, 80: 268–276.

[28] [28] HE Y J, LU L N, SUN K K, et al. Electromagnetic wave absorbing cement-based composite using Nano-Fe3O4 magnetic fluid as absorber[J]. Cem Concr Compos, 2018, 92: 1–6.

[29] [29] MA G W, ZHANG Y X, LIU X F. Electromagnetic wave absorption performance of magnesium phosphate cement functionalized by nano-Fe3O4 magnetic fluid and hollow glass microspheres[J]. Constr Build Mater, 2020, 265: 120771.

[30] [30] WANG Z J, ZHANG T, ZHOU L. Investigation on electromagnetic and microwave absorption properties of copper slag-filled cement mortar[J]. Cem Concr Compos, 2016, 74: 174–181.

[31] [31] SUN J B, HUANG Y M, ASLANI F, et al. Properties of a double-layer EMW-absorbing structure containing a graded nano-sized absorbent combing extruded and sprayed 3D printing[J]. Constr Build Mater, 2020, 261: 120031.

[32] [32] MA G W, SUN J B, WANG L, et al. Electromagnetic and microwave absorbing properties of cementitious composite for 3D printing containing waste copper solids[J]. Cem Concr Compos, 2018, 94: 215–225.

[34] [34] SHEN Y N, LI Q H, XU S L, et al. Electromagnetic wave absorption of multifunctional cementitious composites incorporating polyvinyl alcohol (PVA) fibers and fly ash: Effects of microstructure and hydration[J]. Cem Concr Res, 2021, 143: 106389.

[35] [35] SHI Y F, JING H Q, LIU B B, et al. Synergistic utilization of porous coral sand and fly ash for multifunctional engineered cementitious composites with polyethylene fibers: Intensified electromagnetic wave absorption and mechanism[J]. J Clean Prod, 2023, 396: 136497.

[36] [36] LI B Y, DUAN Y P, LIU S H. The electromagnetic characteristics of fly ash and absorbing properties of cement-based composites using fly ash as cement replacement[J]. Constr Build Mater, 2012, 27(1): 184–188.

[37] [37] DENG S, AI H M, WANG B M. Research on the electromagnetic wave absorption properties of GNPs/EMD cement composite[J]. Constr Build Mater, 2022, 321: 126398.

[38] [38] ZHANG Y, WANG B, WANG X H. Research on absorbing property of cement-based material blending with graphite and carbon fibers[J]. Appl Mech Mater, 2013, 442: 73–77.

[40] [40] LU L N, HE Y J, PING B, et al. TiO2 containing electromagnetic wave absorbing aggregate and its application in concrete[J]. Constr Build Mater, 2017, 134: 602–609.

[41] [41] XIE S, JI Z J, YANG Y, et al. Electromagnetic wave absorption enhancement of carbon black/gypsum based composites filled with expanded perlite[J]. Compos Part B Eng, 2016, 106: 10–19.

[42] [42] WANG Z Y, WANG Z, NING M. Optimization of electromagnetic wave absorption bandwidth of cement-based composites with doped expanded perlite[J]. Constr Build Mater, 2020, 259: 119863.

[43] [43] GUAN H T, LIU S H, DUAN Y P, et al. Investigation of the electromagnetic characteristics of cement based composites filled with EPS[J]. Cem Concr Compos, 2007, 29(1): 49–54.

[44] [44] LI B Y, DUAN Y P, ZHANG Y F, et al. Electromagnetic wave absorption properties of cement-based composites filled with porous materials[J]. Mater Des, 2011, 32(5): 3017–3020.

[45] [45] LV X J, DUAN Y P, CHEN G Q. Electromagnetic wave absorption properties of cement-based composites filled with graphene nano-platelets and hollow glass microspheres[J]. Constr Build Mater, 2018, 162: 280–285.

[46] [46] DENG G, YANG Y Y, ZHOU Q, et al. Lightweight and broadband electromagnetic wave absorbing foamed cement-based composites incorporated with hybrid dielectric fibers[J]. Constr Build Mater, 2022, 327: 126931.

[47] [47] BAI Y H, XIE B, LI H W, et al. Mechanical properties and electromagnetic absorption characteristics of foam Cement-based absorbing materials[J]. Constr Build Mater, 2022, 330: 127221.

[48] [48] REN M M, LI F X, GAO P, et al. Design and preparation of double-layer structured cement-based composite with inspiring microwave absorbing property[J]. Constr Build Mater, 2020, 263: 120670.

[49] [49] ZHANG X Z, SUN W. Microwave absorbing properties of double-layer cementitious composites containing Mn–Zn ferrite[J]. Cem Concr Compos, 2010, 32(9): 726–730.

[50] [50] MA C, XIE S, WU Z H, et al. Research and simulation of three-layered lightweight cement-based electromagnetic wave absorbing composite containing expanded polystyrene and carbon black[J]. Constr Build Mater, 2023, 393: 132047.

[51] [51] YUE L, YANG Y Y, ZHOU Q, et al. Broadband electromagnetic wave absorbing performance by designing the foam structure and double-layer for cement-based composites containing MWCNTs[J]. Cem Concr Compos, 2022, 131: 104595.

[52] [52] ZHANG X Z, SUN W. Preparation and microwave absorbing properties of three-layered cement-based composites[J]. Procedia Eng, 2012, 27: 348–356.

[53] [53] SUN Y F, PENG Y Y, ZHOU T S, et al. Study of the mechanical-electrical-magnetic properties and the microstructure of three-layered cement-based absorbing boards[J]. Rev Adv Mater Sci, 2020, 59(1): 160–169.

[57] [57] DENG G S, LV K, SUN H X, et al. An ultrathin, triple-band metamaterial absorber with wide-incident-angle stability for conformal applications at X and ku frequency band[J]. Nanoscale Res Lett, 2020, 15(1): 217.

[59] [59] WANG X R, LI Q H, LAI H X, et al. Broadband microwave absorption enabled by a novel carbon nanotube gratings/cement composite metastructure[J]. Compos Part B Eng, 2022, 242: 110071.

[60] [60] WANG X R, LI Q H, LAI H X, et al. A carbon nanotube coated metawall with ultra-wideband perfect wave absorption utilizing cement dielectric[J]. Carbon, 2022, 196: 220–228.

[61] [61] LU Y H, ZHANG S L, HE M Y, et al. 3D cross-linked graphene or/and MXene based nanomaterials for electromagnetic wave absorbing and shielding[J]. Carbon, 2021, 178: 413–435.

[62] [62] IQBAL A, SAMBYAL P, KOO C M. 2D MXenes for electromagnetic shielding: A review[J]. Adv Funct Mater, 2020, 30(47): 2000883.

[65] [65] WANASINGHE D, ASLANI F, MA G W. Electromagnetic shielding properties of carbon fibre reinforced cementitious composites[J]. Constr Build Mater, 2020, 260: 120439.

[66] [66] PARK G, KIM S, PARK G K, et al. Influence of carbon fiber on the electromagnetic shielding effectiveness of high-performance fiber- reinforced cementitious composites[J]. J Build Eng, 2021, 35: 101982.

[67] [67] JUNG M, LEE Y S, HONG S G, et al. Carbon nanotubes (CNTs) in ultra-high performance concrete (UHPC): Dispersion, mechanical properties, and electromagnetic interference (EMI) shielding effectiveness (SE)[J]. Cem Concr Res, 2020, 131: 106017.

[68] [68] SINGH A P, GUPTA B K, MISHRA M, et al. Multiwalled carbon nanotube/cement composites with exceptional electromagnetic interference shielding properties[J]. Carbon, 2013, 56: 86–96.

[69] [69] MAHMOOD A, KHUSHNOOD R A, ZEESHAN M. Pyrolytic carbonaceous reinforcements for enhanced electromagnetic and fracture response of cementitious composites[J]. J Clean Prod, 2020, 248: 119288.

[70] [70] WEN S H, CHUNG D D L. Electromagnetic interference shielding reaching 70 dB in steel fiber cement[J]. Cem Concr Res, 2004, 34(2): 329–332.

[71] [71] GUAN B W, DING D H, WANG L F, et al. The electromagnetic wave absorbing properties of cement-based composites using natural magnetite powders as absorber[J]. Mater Res Express, 2017, 4(5): 056103.

[72] [72] LIU Z F, GE H Y, WU J M, et al. Enhanced electromagnetic interference shielding of carbon fiber/cement composites by adding ferroferric oxide nanoparticles[J]. Constr Build Mater, 2017, 151: 575–581.

[73] [73] WANASINGHE D, ASLANI F, MA G W. Electromagnetic shielding properties of cementitious composites containing carbon nanofibers, zinc oxide, and activated carbon powder[J]. Constr Build Mater, 2021, 285: 122842.

[74] [74] WANASINGHE D, ASLANI F, MA G W. An experimental and simulation-based study on the effect of carbonyl iron, heavyweight aggregate powders, and carbon fibres on the electromagnetic shielding properties of cement-based composites[J]. Constr Build Mater, 2021, 313: 125538.

[75] [75] MIN JEON S, JING H Y, JAE SONG Y, et al. Enhanced electromagnetic absorption of cement composites by controlling the effective cross-sectional area of MXene flakes with diffuse reflection based on carbon fibers[J]. Constr Build Mater, 2022, 348: 128711.

[76] [76] CHEN J, ZHAO D, GE H Y, et al. Graphene oxide-deposited carbon fiber/cement composites for electromagnetic interference shielding application[J]. Constr Build Mater, 2015, 84: 66–72.