[1] [1] ZHANG L J, SHEN W,LIU T. Study on technological machining of thing-wall titanium alloy element［J］. Modern Manufacturing Engineering, 2012,34(11):69-72(in Chinese).

[2] [2] LIANG X K,DONG P,CHEN J L,et al. Microstructure and mechanical properties of selective laser melting Ti-6Al-4V alloy ［J］.Applied Laser, 2014, 34(2):101-104(in Chinese).

[3] [3] UHLMANN E, KERSTUNG R, KLEIN T B, et al. Additive manufacturing of titanium alloy for aircraft components ［J］. Procedia Cirp, 2015, 35:55-60.

[4] [4] YAO H Sh, SHI Y Sh, ZHANG W X, et al. Numerical simulation of the temperature field in selective laser melting ［J］. Applied Laser, 2007, 27(6):456-460(in Chinese).

[5] [5] YANG Y Q, LUO Z Y, SU X B, et al. Study on process and effective factors of stainless steel thin-wall parts manufactured by selective laser melting［J］. Chinese Journal of Lasers, 2011, 38(1):0103001(in Chinese).

[6] [6] LIU Y, ZHANG J, PANG Z, et al. Investigation into the influence of laser energy input on selective laser melted thin-walled parts by response surface method［J］. Optics & Lasers in Engineering, 2018, 103:34-45.

[7] [7] LI Zh H, REN J X, ZHENG W Zh, et al. The influence of scan length on fabricating thin-walled components in selective laser melting［J］. International Journal of Machine Tools & Manufacture, 2017, 126:1-12.

[8] [8] SONG C, YANG Y, LIU Y, et al. Study on manufacturing of W-Cu alloy thin wall parts by selective laser melting［J］. International Journal of Advanced Manufacturing Technology, 2015, 78(5/8):885-893.

[9] [9] LI C, LIU J F, FANG X Y, et al. Efficient predictive model of part distortion and residual stress in selective laser melting［J］. Additive Manufacturing, 2017, 17: 157-168.

[10] [10] ZHANG K, LIU T T, ZHANG C D, et al. Study on deformation behavior in selective laser melting based on the analysis of the melt pool data［J］. Chinese Journal of Lasers, 2015, 42(9): 0903007(in Chinese).

[11] [11] MAZUR M, LEARY M, SUN S, et al. Deformation and failure behavior of Ti-6Al-4V lattice structures manufactured by selective laser melting (SLM)［J］. International Journal of Advanced Manufacturing Technology, 2016, 84(5/8):1391-1411.

[12] [12] ZHANG G Q, YANG Y Q, ZHANG Z M, et al. Optimal design of support structures in selective laser melting of part［J］. Chinese Journal of Lasers, 2016, 43(12): 1202002(in Chinese).

[13] [13] PARRY L, ASHCROFT I A, WILDMAN R D. Understanding the effect of laser scan strategy on residual stress in selective laser melting through thermo-mechanical simulation［J］. Additive Manufacturing, 2016, 12:1-15.

[14] [14] ALI H, GHADBEIGI H, MUMTAZ K. Effect of scanning strategies on residual stress and mechanical properties of selective laser melted Ti6Al4V［J］. Materials Science and Engineering, 2018, A712: 175-187.

[15] [15] LI Y, ZHOU K, TAN P, et al. Modeling temperature and residual stress fields in selective laser melting［J］. International Journal of Mechanical Sciences, 2018, 136:24-35.

[16] [16] SIMSON T, EMMEL A, DWARS A, et al. Residual stress measurements on AISI 316L samples manufactured by selective laser melting［J］. Additive Manufacturing, 2017, 17: 183-189.

[17] [17] VRANCKEN B, CAIN V, KNUTSEN R, et al. Residual stress via the contour method in compact tension specimens produced via selective laser melting［J］. Scripta Materialia, 2014, 87:29-32.

[18] [18] DENG Sh Sh, YANG Y Q, LI Y, et al. Planning of area-partition scanning path and its effect on residual stress of SLM molding parts[J]. Chinese Journal of Lasers, 2016,43(12): 1202003(in Chinese).

[19] [19] LIANG X K,CHEN J L,YAN Zh Y, et al. Study on surface adhesion and residual stress of TC4 titanium alloy by selective laser melting［J］. Electro Machining Mould, 2016,16(5):52-55(in Chinese).

[20] [20] OSAKADA K, SHIOMI M. Flexible manufacturing of metallic products by selective laser melting of powder［J］. International Journal of Machine Tools & Manufacture, 2006, 46(11):1188-1193.LIU Z A, SHI W, WANG Ch. Study on numerical simulation of residual stresses cinduced by laser shock processing[J].Laser Technology, 2017, 41(1):1-5(in Chinese).

[21] [21] LIU T T,ZHANG Ch D,LIAO W H, et al. Experimental analysis of pool behavior in overhang structure fabricated by selective laser melting［J］.Chinese Journal of Lasers, 2016,43(12): 1202004(in Chinese).