Effect of Longitudinal Steady Magnetic Field on Dynamics of Molten Pool in Laser-Powder-Filling Welding of Aluminum Matrix Composites

Longzhi Zhao; Xiuping Hu; Mingjuan Zhao

doi:10.3788/CJL240835

Chinese Journal of Lasers, Volume. 52, Issue 4, 0402102(2025)

Effect of Longitudinal Steady Magnetic Field on Dynamics of Molten Pool in Laser-Powder-Filling Welding of Aluminum Matrix Composites

Longzhi Zhao^1,2, Xiuping Hu¹, and Mingjuan Zhao^1、*

Author Affiliations

¹School of Materials Science and Engineering, East China Jiaotong University, Nanchang 330013, Jiangxi , China

²State Key Laboratory Performance Monitoring and Protecting of Rail Transit Infrastructure, East China Jiaotong University, Nanchang 330013, Jiangxi , China

show less

Abstract Get PDF(in Chinese)

References(21)

[1] Mao Y, Li J X, Vivek A et al. High strength impact welding of 7075 Al to a SiC-reinforced aluminum metal matrix composite[J]. Materials Letters, 303, 130549(2021).

[2] Li F, Jiang Y M, Mi G Y et al. Microstructure evolution and mechanical properties of 20%SiCp/Al joint prepared via laser welding[J]. Materials, 15, 6046(2022).

[3] Zhao B, Peng J H, Ding W F. Machined surface formation and integrity control technology of SiCp/Al composites: a review[J]. Surface Science and Technology, 1, 10(2023).

[4] Guo L L. Research status of joining technique of SiC particle reinforced aluminium matrix composites[J]. Hot Working Technology, 48, 6-9(2019).

[5] Chen G Q, Yin Q X, Cao J et al. Electron beam surface heating-diffusion bonding: an effective joining method for aluminum alloy metal-matrix composite with high SiC volume[J]. Journal of Materials Science & Technology, 88, 109-118(2021).

[6] Wu J Z, Wei H Y, Yuan F B et al. Effect of beam profile on heat and mass transfer in filler powder laser welding[J]. Journal of Materials Processing Technology, 258, 47-57(2018).

[7] Kim C, Ahn Y, Lee K B et al. High-deposition-rate position welding of Al 5083 alloy for spherical-type liquefied natural gas tank[J]. Proceedings of the Institution of Mechanical Engineers, 230, 818-824(2016).

[8] Bunaziv I, Akselsen O M, Ren X B et al. Laser beam and laser-arc hybrid welding of aluminium alloys[J]. Metals, 11, 1150(2021).

[9] Wang Q, Zhang L, Li Q et al. Research progress of electromagnetic field assisted laser cladding technology[J]. Surface Technology, 52, 166-179(2023).

[10] Yu S F, Zhang Y S, Lei Y et al. Mechanisms of rotational magnetic field stirring of laser welded nonmagnetic alloy for laser welding[J]. Transactions of the China Welding Institution, 27, 109-112, 118(2006).

[11] Gatzen M, Tang Z. CFD-based model for melt flow in laser beam welding of aluminium with coaxial magnetic field[J]. Physics Procedia, 5, 317-326(2010).

[12] Chen J C, Wei Y H, Zhan X H et al. Melt flow and thermal transfer during magnetically supported laser beam welding of thick aluminum alloy plates[J]. Journal of Materials Processing Technology, 254, 325-337(2018).

[13] Bachmann M, Avilov V, Gumenyuk A et al. About the influence of a steady magnetic field on weld pool dynamics in partial penetration high power laser beam welding of thick aluminium parts[J]. International Journal of Heat and Mass Transfer, 60, 309-321(2013).

[14] Xu J J, Rong Y M, Huang Y. Magnetic-field-induced partial-to-full penetration evolution and its mechanism during laser welding[J]. JOM, 71, 2296-2302(2019).

[15] Zhan X H, Zhou J J, Sun W H et al. Effect of external applied steady magnetic field on the morphology of laser welding joint of 4-mm 2024 aluminum alloy[J]. Applied Physics A, 123, 106(2017).

[16] Reyna-Montoya J S, García-Rentería M A, Cruz-Hernández V L et al. Effect of electromagnetic interaction on microstructure and corrosion resistance of 7075 aluminium alloy during modified indirect electric arc welding process[J]. Transactions of Nonferrous Metals Society of China, 29, 473-484(2019).

[17] Cao L C, Zhou Q, Liu H P et al. Mechanism investigation of the influence of the magnetic field on the molten pool behavior during laser welding of aluminum alloy[J]. International Journal of Heat and Mass Transfer, 162, 120390(2020).

[18] Dai D H, Gu D D, Zhang H et al. Influence of scan strategy and molten pool configuration on microstructures and tensile properties of selective laser melting additive manufactured aluminum based parts[J]. Optics & Laser Technology, 99, 91-100(2018).

[19] Bachmann M, Avilov V, Gumenyuk A et al. Experimental and numerical investigation of an electromagnetic weld pool support system for high power laser beam welding of austenitic stainless steel[J]. Journal of Materials Processing Technology, 214, 578-591(2014).

[20] Zuo X W, Guo R, An B L et al. Microstructure, hardness and electrical resistivity of directionally solidified Cu-6%Ag alloy under a transverse magnetic field[J]. Acta Metallurgica Sinica, 52, 143-150(2016).

[21] Hu Y, Wang L, Chen Z J et al. Effects of electromagnetic compound field on the dendrite growth of laser cladding[J]. Surface and Coatings Technology, 453, 129118(2023).

Tools

Get Citation

Copy Citation Text

Longzhi Zhao, Xiuping Hu, Mingjuan Zhao. Effect of Longitudinal Steady Magnetic Field on Dynamics of Molten Pool in Laser-Powder-Filling Welding of Aluminum Matrix Composites[J]. Chinese Journal of Lasers, 2025, 52(4): 0402102

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: Laser Forming Manufacturing

Received: May. 6, 2024

Accepted: Jun. 17, 2024

Published Online: Jan. 15, 2025

The Author Email: Zhao Mingjuan (zhaomingjuan100@163.com)

DOI:10.3788/CJL240835

CSTR:32183.14.CJL240835

Topics

laser devices and laser physics

Lasers and Laser Optics

Laser physics

laser manufacturing

Instrumentation, Measurement and Metrology