Research on Laser Cutting Process Optimization of 4 mm Thick TC4‐M Titanium Alloy

Ya Zhang; Wentao Xu; Chunyu Wang; Xianfeng Zhang; Hua Qing; Dunming Tan; Shuai Wang

doi:10.3788/CJL241291

Chinese Journal of Lasers, Volume. 52, Issue 8, 0802102(2025)

Research on Laser Cutting Process Optimization of 4 mm Thick TC4‐M Titanium Alloy

Ya Zhang¹, Wentao Xu¹, Chunyu Wang², Xianfeng Zhang^2、*, Hua Qing², Dunming Tan², and Shuai Wang³

Author Affiliations

¹School of Mechanics and Safety Engineering, Zhengzhou University, Zhengzhou 450001, Henan , China

²Aviation Maintenance NCO Academy, Air Force Engineering University, Xinyang 464001, Henan , China

³School of Materials Science and Engineering, Guilin University of Electronic Technology, Guilin 541004, Guangxi , China

show less

Abstract Get PDF(in Chinese)

References(18)

[1] Hourmand M, Sarhan A A D, Sayuti M et al. A comprehensive review on machining of titanium alloys[J]. Arabian Journal for Science and Engineering, 46, 7087-7123(2021).

[2] Li G X, Chandra S, Rahman Rashid R A et al. Machinability of additively manufactured titanium alloys: a comprehensive review[J]. Journal of Manufacturing Processes, 75, 72-99(2022).

[3] Meng X K, Zhang H, Song F Y et al. Microstructure and tensile properties of Ti6Al4V titanium alloy by dual-pulse laser shock peening[J]. Chinese Journal of Lasers, 51, 2002201(2024).

[4] Zhang D C, Wang L Y, Zhang H et al. Effect of heat treatment on the tensile behavior of selective laser melted Ti-6Al-4V by in situ X-ray characterization[J]. Acta Materialia, 189, 93-104(2020).

[5] Murray J, Zdebski D, Clare A T. Workpiece debris deposition on tool electrodes and secondary discharge phenomena in micro-EDM[J]. Journal of Materials Processing Technology, 212, 1537-1547(2012).

[6] Yuan C G, Pramanik A, Basak A K et al. Drilling of titanium alloy (Ti6Al4V)–a review[J]. Machining Science and Technology, 25, 637-702(2021).

[7] Li Y P, Liang R C, Wang H P et al. Experimental study on picosecond laser cutting of quartz glass[J]. Chinese Journal of Lasers, 51, 2402107(2024).

[8] Shi X S, Zhang H J, Ge H H et al. Research on section quality of 304 stainless steel thick plate cut by ultra-high power laser under different process parameters[J]. Laser & Optoelectronics Progress, 60, 2314007(2023).

[9] Zhang Y L, Zhong Z R, Cao J et al. Artificial intelligence empowered laser: research progress of intelligent laser manufacturing equipment and technology[J]. Chinese Journal of Lasers, 50, 1101005(2023).

[10] Hou H L, Wu C, Gong J Z et al. Study on laser cutting of titanium alloy aircraft skin and its mechanical properties[J]. Hot Working Technology, 49, 125-129, 132(2020).

[11] Boudjemline A, Boujelbene M, Bayraktar E. Surface quality of Ti-6Al-4V titanium alloy parts machined by laser cutting[J]. Engineering, 10, 6062-6067(2020).

[12] Pandey A K, Dubey A K. Simultaneous optimization of multiple quality characteristics in laser cutting of titanium alloy sheet[J]. Optics & Laser Technology, 44, 1858-1865(2012).

[13] Pandey A K, Dubey A K. Modeling and optimization of kerf taper and surface roughness in laser cutting of titanium alloy sheet[J]. Journal of Mechanical Science and Technology, 27, 2115-2124(2013).

[14] Shrivastava P K, Pandey A K. Multi-objective optimization of cutting parameters during laser cutting of titanium alloy sheet using hybrid approach of genetic algorithm and multiple regression analysis[J]. Materials Today: Proceedings, 5, 24710-24719(2018).

[15] Lü S J, Wang Y. An investigation of pulsed laser cutting of titanium alloy sheet[J]. Optics and Lasers in Engineering, 44, 1067-1077(2006).

[16] Scintilla L D, Sorgente D, Tricarico L. Experimental investigation on fiber laser cutting of Ti6Al4V thin sheet[J]. Advanced Materials Research, 264/265, 1281-1286(2011).

[17] Wang B, Shu L S. Optimization of process parameters of laser cladding 304L alloy powder based on orthogonal experiment[J]. Applied Laser, 39, 580-585(2019).

[18] Li Y L, Wang J, Liang Q. Optimization of laser cutting process parameters for stainless steel using response surface method[J]. Materials Science and Technology, 28, 65-72(2020).

Tools

Get Citation

Copy Citation Text

Ya Zhang, Wentao Xu, Chunyu Wang, Xianfeng Zhang, Hua Qing, Dunming Tan, Shuai Wang. Research on Laser Cutting Process Optimization of 4 mm Thick TC4‐M Titanium Alloy[J]. Chinese Journal of Lasers, 2025, 52(8): 0802102

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: Laser Forming Manufacturing

Received: Oct. 28, 2024

Accepted: Dec. 13, 2024

Published Online: Apr. 8, 2025

The Author Email: Xianfeng Zhang (15837679286@139.com)

DOI:10.3788/CJL241291

CSTR:32183.14.CJL241291

Topics

laser devices and laser physics

Lasers and Laser Optics

Laser physics

laser manufacturing

Instrumentation, Measurement and Metrology