[1] [1] T Matsuyama, Y Ohmura, D M Williamson. The lithographic lens: its history and evolution[C]. SPIE, 2006, 6154: 615403.

[2] [2] Ni Mingyang, Gong Yan. Precise lens support and adjustment technology for DUV lithographic projection objective[J]. Optics and Precision Engineering, 2011, 19(s): 390-399.

[3] [3] Zhang Jian, Liu Weiqi, Wang Rudong, et al.. Effect of gravity deformation on optical performance of super-accuracy Fizeau interferometer[J]. Acta Optica Sinica, 2011, 31(7): 0712001.

[4] [4] Wang Rudong, Tian Wei, Wang Ping, et al.. Analysis of vibration effect to surface figure measurement[J]. Acta Optica Sinica, 2012, 32(11): 1112001.

[5] [5] Wang Rudong, Tian Wei, Wang Ping, et al.. Effect of temperature change on the surface accuracy on bonded lens[J]. Chinese J Lasers, 2011, 38(8): 0808002.

[6] [6] Ni Mingyang, Gong Yan. Transmission ratio analysis for a lateral adjustment barrel in DUV projection lens[J]. Infrared and Laser Engineering, 2012, 41(12): 3323-3330.

[7] [7] M Trunz, R Hilgers, E Merz, et al.. Optical imaging device, particularly an objective, with at least one optical element US: 6191898[P]. 2001-02-20.

[8] [8] Zhao Lei, Gong Yan, Zhao Yang. Flexure-based X-Y micro-motion mechanism used in lithographic lens[J]. Optics and Precision Engineering, 2013, 21(6): 1425-1433.

[9] [9] Zhao Lei, Gong Yan. Design an analysis for the high-precision lens support structure of objective lens for lithography[J]. Acta Optica Sinica, 2012, 32(9): 0922001.

[10] [10] Yuan Wenquan, Gong Yan. Study on characteristics of aberrations for an active liquid lens in lithographic objective lens[J]. Acta Optica Sinica, 2011, 31(12): 1222003.

[11] [11] S Xu, H Ren, Y Lin, et al.. Adaptive liquid lens actuated by photo-polymer[J]. Opt Express, 2009, 17(20): 17590-17595.

[12] [12] S Xu, Y Liu, H Ren, et al.. A novel adaptive mechanical-wetting lens for visible and near infrared imaging[J]. Opt Express, 2010, 18(12): 12430-12435.

[13] [13] Sun Zhen, Gong Yan. Performance of aberration compensation of lens active optics[J]. Opto-Electronic Engineering, 2012, 39(8): 118-122.

[14] [14] P R Yoder. Opto-Mechanical Systems Design (3rd)[M]. Florida: CRC Press, 2006.

[15] [15] Wang Ping, Tian Wei, Wang Rudong, et al.. Optimized design of high precision flexure-support barrel for reference sphere[J]. Chinese Optics, 2011, 4(4): 380-387.

[16] [16] N Lobontiu. Compliant Mechanisms: Design of Flexure Hinges[M]. Florida: CRC Press, 2003.

[17] [17] K Schwertz, J H Burge. Optomechanical Design and Analysis[M]. Bellingham: SPIE Press, 2012.

[18] [18] Yang Xiaofei, Zhang Xiaohui, Han Changyuan. Alignment of a three-mirror off-axis aspherical optical system by using gradual abberration optimization[J]. Acta Optica Sinica, 2004, 24(1): 115-120.