[1] [1] J M Miller, R O Barton, M T Bergin. Multi-Axis Alignment Apparatus[P]. US Patent 4804270, [1989-07-18].

[2] [2] Fan Zhigang, He Jin, Zuo Baojun, et al.. Research on six-degree-of-freedom calibration system for wind tunnel balances with a collimated laser beam[J]. Chin Opt Lett, 2003, 1(2): 82-84.

[3] [3] P S Huang, Y Li. Laser measurement instrument for fast calibration of machine tools[C]. Proceedings of ASPE Annual Meeting, 1996, 14: 644-647.

[4] [4] Kenta Umetsu, Ryosyu Furutnani, Sonko Osawa, et al.. Geometric calibration of a coordinate measuring machine using a laser tracking system[J]. Meas Sci & Technol, 2005, 16(12): 2466-2472.

[5] [5] Bruce L Thomas, Henry M Bass, Lloyd K Loftus, et al.. Laser Aligned Five-Axis Position Measurement Device[P]. US Patent 5798828, [1998-08-25].

[6] [6] Liu Chien-Hung, Jywe Wen-Yuh, Hsu Cheng-Chung, et al.. Development of a laser-based high-precision six-degrees-of-freedom motion errors measuring system for linear stage[J]. Rev Sci Instrum, 2005, 76(5): 055110.

[7] [7] J Ni, S M Wu. An on-line measurement technique for machine volumetric error compensation[J]. J Engineering for Industry, 1993, 115(1): 85-92.

[8] [8] Fan K-C, Chen M-J. A 6-degree-of-freedom measurement system for the accuracy of X-Y stages[J]. Precision Engineering, 2000, 24(1): 15-23.

[9] [9] Shimizu S, LEE H S, Imai N. Simultaneous measurement method of table motion errors in six degrees of freedom[J]. International J Japan Society for Precision Engineering, 1994, 28(8): 273-274.

[10] [10] Ni J, Huang P S, Wu S M. A multi-degree-of-freedom measuring system for CMM geometric errors[J]. J Engineering for Industry, 1992, 114(3): 362-369.

[11] [11] Fan K C, Chen M J, Hang W M, et al.. A six degree of freedom measurement system for the motion accuracy of linear stages[J]．International J Machine Tools and Manufacturing, 1998, 38(3): 155-164.

[12] [12] Nakayabu T, Mori H, Takika A, et al.. Development of a practical measurement system for rolling by means of laser interferometry[J]. J Jpn Prec Eng, 1995, 61(2): 253-257.

[13] [13] Zhang Zhijiang, Yu Yingjie. Modeling of three-dimensional small angle measurement system[J]. Acta Meterologica Sinica, 2003, 24(1): 21-25.

[14] [14] Ma Junshan, Wang Xiangzhao, Fang Zujie. Optical precision measurement technique of rolling error[J]. Acta Optica Sinica, 2000, 20(10): 1403-1406.

[15] [15] Gao Wei, Zhang Sizhou, Satoshi Kiyono. Measurement and control of rolling of a precision moving table[C]. Proceedings of the IEEE International Conference on Intelligent Processing Systems, 1997, 1: 70-74.

[16] [16] Yin Chunyong, Xie Guangping, Cheng Xiangyin, et al.. Measurement method of rolling angle[J]. J Tsinghua University (Sci & Tech), 1996, 36(10): 86-91.

[17] [17] Jiang Hong, Yin Chunyong. A novel method to measure the roll angle using a transverse Zeeman laser[J]. Chinese J Lasers, 1999, 26(12): 1085-1089.

[18] [18] Jiang Hong, Yin Chunyong. Sensitivity enhanced roll angle measurement[J]. Opt Eng, 2000, 39(2): 516-519.

[19] [19] Liu Zhongyao, Lin Dejiao, Yin Yongchun. High precision roll angle interferometer[J]. Optical Technique, 2002, 28(4): 332-334.

[20] [20] Chen Lei, Zhang Enyao, Guo Hong, et al.. A novel method of rolling angle measurement[J]. J Optoelectronics·Laser, 2003, 14(6): 625-628.