[1] [1] Huaming Wang, F Cao, L X Cai, et al.. Microstructure and tribological properties of laser clad Ti2Ni3Si/NiTi intermetallic coatings[J]. Acta Materialia, 2003, 51(20): 6319-6327.

[2] [2] Feng Shurong, Zhang Shuquan, Wang Huaming. Wear resistance of laser clad hard particles reinforced intermetallic composite coating on TA15 alloy[J]. Chinese J Lasers, 2012, 39 (2): 0203002.

[3] [3] Zhu Qingjun, Zou Zengda, Wang Xinhong, et al.. Influence of rare earths on Fe-based amorphous composite coatings by laser cladding[J]. Transactions of the China Welding Institution, 2008, 29(2): 57-60.

[4] [4] Li Gang, Liu Li, Hou Junying, et al.. Study on microstructure and performance of laser cladding Ni-Zr-Nb-Al amorphous composite coating[J]. Laser Technology, 2011, 35(2): 185-188.

[5] [5] Wu Jian, Xu Lili, Yang Sen. Influence of heat treatment on the microstructure and properties of pulsed laser deposited hydroxyapatite thin films[J]. Chinese J Lasers, 2012, 39(5): 0507003.

[6] [6] D T A Matthews, V Ocelik, J Th M De Hosson . Tribological and mechanical properties of high power laser surface-treated metallic glasses[J]. Materials Science and Engineering: A, 2007, 471(1-2): 155-164.

[7] [7] Y Adraider, Y X Pang, F Nabhani, et al.. Laser-induced deposition of sol-gel alumina coating on stainless steel under wet condition[J]. Surface and Coatings Technology. 2011, 205(23-24): 5345-5349.

[8] [8] D D Gu, G B Meng, C Li et al.. Selective laser melting of TiC/Ti bulk nanocomposites: Influence of nanoscale reinforcement[J]. Scripta Materialia. 2012, 67(2): 185-188.

[9] [9] Y S Wu, D C Zeng, Z W Liu, et al.. Microstructure and sliding wear behavior of nanostructured Ni60-TiB2 composite coating sprayed by HVOF technique[J]. Surface and Coatings Technology, 2011, 206(6): 1102-1108.

[10] [10] Li Jianing, Chen Chuanzhong, Wang Diangang, et al.. Microstructures and wear properties of YPSZ/CeO2 reinforced composites deposited by laser cladding[J]. Composites Part B: Engineering, 2012, 43(3): 896-901.

[11] [11] B G Guo, J S Zhou, S T Zhang, et al.. Microstructure and tribological properties of in situ synthesized TiN/Ti3Al intermetallic matrix composite coatings on titanium by laser cladding and laser nitriding[J]. Materials Science and Engineering A, 2008, 480(1-2): 404-410.

[12] [12] Li Jianing, Chen Chuanzhong, He Qingshan, et al.. Influence of Cu on microstructure and wear resistance of TiC/TiB/TiN reinforced composite coating fabricated by laser cladding[J]. Materials Chemistry and Physics, 2012, 133(2-3): 741-745.

[13] [13] M X Li, S H Zhang, H S Li, et al.. Effect of nano-CeO2 on cobalt-based alloy laser coatings[J]. Journal of Materials Processing Technology, 2008, 202(1-3): 107-111.

[14] [14] Zhang Song, Zhou Lei, Hao Yuxi, et al.. Microstructures and tribological properties of laser clad Ni base alloy on Monel alloy[J]. Transactions of the China Welding Institution, 2013, 34(1): 9-12.

[15] [15] Zhang Bangwei. Physical Fundamentals of Nanomaterials[M]. Beijing: Chemical Industry Press, 2009. 110-111.

[16] [16] Li Jianing, Gong Shuili, Chen Chuanzhong, et al.. Physical properties and formation mechanism of copper/glass modified laser nanocrystals-amorphous reinforced coatings[J]. Journal of Physical Chemistry C, 2013, 117(9): 4568-4573.

[17] [17] Li Mingyu, Chao Mingju, Liang Erjun, et al.. Investigation on laser surface modification of copper[J]. Chinese J Lasers, 2011, 38(8): 0803001.

[18] [18] D D Gu, Y C Hagedorn, W Meiners, et al.. Nanocrystalline TiC reinforced Ti matrix bulk-form nanocomposites by Selective Laser Melting (SLM): Densification, growth mechanism and wear behavior[J]. Composites Science and Technology, 2011, 71(13): 1612-1620.