[1] [1] Zhang Dejiang, Liu Liren, Xu Rongwei et al.. Finite element analysis for wavefront error of lenses induced by gravity [J]. Acta Optica Sinica, 2005, 25(4): 538～541

[2] [2] Wu Xiaoxia, Yang Hongbo, Zhang Jingxu. Optimal design of support system for the large-aperture sphere mirror［J］. Acta Photonica Sinica, 2009, 38(1): 129～132

[3] [3] Liu Yang, Yang Hongbo, Liu Shaobin et al.. Lightweight primary reflector and design of supporting structure for space imaging system [J]. Computer Analysis, 2008, 25(7): 314～316

[4] [4] Yang Liwei, Li Zhilai. Design of a flexible supporting structure based on finite element analysis［J］. J. Changchun University of Science and Technology, 2008, 31(1): 49～52

[5] [5] Huang Qitai. An Analysis on Support Structure of Lightweight SiC Reflecting Mirror［D］. Suzhou: Soochow University, 2004

[6] [6] L. Sakas, M. H. Pedrayes, J. Valdez et al.. Activce primary mirror support for the 2.1 m telescope at the San Pedro Martir Observatory [J]. Appl. Opt., 1997, 36(16): 3708～3716

[7] [7] Robert A. Jones. Fabrication of a large, thin, off-axis aspheric mirror［J］. Opt. Engng., 1994, 33(12): 4067～4075

[8] [8] Donald Golini, William. I. Kordonski, Paul Dumas et al.. Magnetorheological finishing (MRF) in commercial precision optics manufacturing［C］. SPIE, 1999, 3782: 80～91

[9] [9] Jessica E. DeGroote, Anne E. Marino, John P. Wilson et al.. Removal rate model for magnetorheological finishing of glass［J］. Appl. Opt., 2007, 46(32): 7927～7941

[10] [10] Aric Shorey, William Kordonski, Marc Tricard. Magnetorheological finishing of large and lightweight optics ［C］. SPIE, 2004, 5533: 99～107

[11] [11] Yang Li. Modern Optical Manufacturing Engineering［M］. Beiging:Science Press, 2008. 85～134

[12] [12] Fan Bin, Wan Yongjian, Chen Wei et al.. Manufacturing features comparing between computer control active-lap and computer control optical surface for large aspheric optics［J］. Chinese J. Lasers, 2006, 33(1): 128～132

[13] [13] Pietro Schipani, Sergio Dorsi, Luigi Ferragina et al.. Active optics primary mirror support system for the 2.6 m VST telescope［J］. Appl. Opt., 2010, 49(8): 1234～1241

[14] [14] P. Beraud, J. Espiard, R. Geyl et al.. Optical figuring and testing of the VLT8.2 m primary mirrors［C］. SPIE, 1995, 2536: 413～419

[15] [15] P. M. Gray, J. M. Hill, W. H. Davison et al.. Support of large borosilicate honeycomb mirrors［C］. SPIE, 1994, 2199: 691～701

[16] [16] James H. Burge. Simulation and optimization for a computer-controlled large-tool polisher [C]. in Optical Fabrication and Testing of Asphers (FTA), 1999. 34～45