[1] [1] SEALY C. Inganic nanomaterials pin hope on 3D printing[J]. Nanotoday , 2023, 53: 1.

[2] CHIEW S M, IBRAHIM I S, ARIFFIN M A M et al. Evaluation of light transmittance performance of light-transmitting concrete with optical fibre[J]. Construction and Building Materials, 351, 128949(2022).

[3] [3] DONALDSON L. Semiconduct material able to withst high temperatures[J]. Materials Today , 2021, 50: 1.

[4] FAYOMI J, POPOOLA A P I, POPOOLA O M et al. The appraisal of the thermal properties, electrical response, and corrosion resistance performance of AA8011 reinforced Nano Si₃N₄ for automobile application[J]. Journal of Alloys and Compounds, 850, 156679(2021).

[5] GAO H, LIU H, LIAO L et al. A novel inorganic thermal insulation material utilizing perlite tailings[J]. Energy and Buildings, 190, 25-33(2019).

[6] LAI L L, HUANG P H, STEMME G et al. 3D printing of glass micro-optics with subwavelength features on optical fiber tips[J]. ACS Nano, 18, 10788-10797(2024).

[7] HONG Z, YE P, LOY D A et al. High-precision printing of complex glass imaging optics with precondensed liquid silica resin[J]. Advanced Science, 9, 2105595(2022).

[8] HUA J G, LIANG S Y, CHEN Q D et al. Free-form micro-optics out of crystals: femtosecond laser 3D sculpturing[J]. Advanced Functional Materials, 32, 2200255(2022).

[9] [9] MOON H, PARK B, KIM S. Transfmation of 2D planes into 3D soft structures with electrical functions[C]IEEE, 2021 21st International Conference on SolidState Senss, Actuats Microsystems (Transducers), 2021: 13.

[10] VALLACHIRA W S P, MÜLLER E, CLEMENT P et al. In vitro cytocompatibility assessment of Ti-modified, silicon-oxycarbide-based, polymer-derived, ceramic-implantable electrodes under pacing conditions[J]. ACS Applied Materials & Interfaces, 12, 17244-17253(2020).

[11] [11] JONAVIČIUS T, REKŠTYTĖ S, ŽUKAUSKAS A, et al. Laser nanolithography chemical metalization f the manufacturing of 3D metallic interconnects[C]SPIE, 2014, 8970: 4147.

[12] [12] LUITZ M, LUNZER M, MADER M, et al. Fabrication of platinum microstructures f senss labonachip devices[C]Microfluidics, BioMEMS, Medical Microsystems XX. SPIE, 2022, 11955: 7479.

[13] [13] WANG W, CHEN Z Q, LIN B, et al. Twophoton polymerizationbased 3D microscaffolds toward biomedical devices[J]. Chemical Engineering Journal , 2024, 493: 152469.

[14] SUN C, LU J, GUO X et al. Bimetallic metal-organic frameworks-derived lithiophilic and conductive MnO/Co/C enabled intermittent deposition model for high-performance lithium metal anode[J]. Journal of Power Sources, 607, 234597(2024).

[15] [15] SKLIUTAS E, REKŠTYTĖ S, MALINAUSKAS M. Laser lithography f bioprinting: from 3D scaffolds to plant based resins[C]CLEO: Applications Technology. Optica Publishing Group , 2021: AW4D.5.

[16] ZHOU Y, LI M, WANG Y et al. Synthesis of sea urchin-like ZnO by a simple soft template method and its photoelectric properties[J]. Materials Science in Semiconductor Processing, 27, 1050-1056(2014).

[17] KOTZ F, PLEWA K, BAUER W et al. Liquid glass: a facile soft replication method for structuring glass[J]. Advanced Materials (Deerfield Beach, Fla), 28, 4646-4650(2016).

[18] ZHANG J, DING H, LIU X et al. Facile surface functionalization strategy for two‐photon lithography microstructures[J]. Small, 17, 2101048(2021).

[19] BUTKUTė A, MERKININKAITė G, JURKšAS T et al. Femtosecond laser assisted 3D etching using inorganic-organic etchant[J]. Materials, 15, 2817(2022).

[20] HU C, AUBERT T, JUSTO Y et al. The micropatterning of layers of colloidal quantum dots with inorganic ligands using selective wet etching[J]. Nanotechnology, 25, 175302(2014).

[21] ROSS C A, MACLACHLAN D G, CHOUDHURY D et al. Optimisation of ultrafast laser assisted etching in fused silica[J]. Optics Express, 26, 24343-24356(2018).

[22] ROS-TÁRRAGA P, MURCIANO A, MAZÓN P et al. New 3D stratified Si-Ca-P porous scaffolds obtained by sol-gel and polymer replica method: Microstructural, mineralogical and chemical characterization[J]. Ceramics International, 43, 6548-6553(2017).

[23] WARREN S C, PERKINS M R, ADAMS A M et al. A silica sol–gel design strategy for nanostructured metallic materials[J]. Nature Materials, 11, 460-467(2012).

[24] XIE H, YANG X, LIU P et al. 3D gel printing of alumina ceramics followed by efficient multi-step liquid desiccant drying[J]. Journal of theEuropean Ceramic Society, 41, 6634-6640(2021).

[25] NIU F, YANG X, LI Y et al. Fused deposition modeling of Si3N4 ceramics: a cost-effective 3D-printing route for dense and high performance non-oxide ceramic materials[J]. Journal of the European Ceramic Society, 42, 7369-7376(2022).

[26] HE Q, JIANG J, YANG X et al. Additive manufacturing of dense zirconia ceramics by fused deposition modeling via screw extrusion[J]. Journal of the European Ceramic Society, 41, 1033-1040(2021).

[27] CUNICO M W. Investigation of ceramic dental prostheses based on ZrSiO₄-glass composites fabricated by indirect additive manufacturing[J]. International Journal of Bioprinting, 7, 315(2020).

[28] LIU B, LIU S, DEVARAJ V et al. Metal 3D nanoprinting with coupled fields[J]. Nature Communications, 14, 4920(2023).

[29] JUNG W, JUNG Y H, PIKHITSA P V et al. Three-dimensional nanoprinting via charged aerosol jets[J]. Nature, 592, 54-59(2021).

[30] LEE H, YOU S, PIKHITSA P V et al. Three-dimensional assembly of nanoparticles from charged aerosols[J]. Nano Letters, 11, 119-124(2011).

[31] KIM F, YANG S E, JU H et al. Direct ink writing of three-dimensional thermoelectric microarchitectures[J]. Nat Electron, 4, 579-587(2021).

[32] DYLLA-SPEARS R, YEE T D, SASAN K et al. 3D printed gradient index glass optics[J]. Science Advances, 6, eabc7429(2020).

[33] ZHAO S, SIQUEIRA G, DRDOVA S et al. Additive manufacturing of silica aerogels[J]. Nature, 584, 387-392(2020).

[34] SUN K, TAN D, FANG X et al. Three-dimensional direct lithography of stable perovskite nanocrystals in glass[J]. Science, 375, 307-310(2022).

[35] ARMON N, GREENBERG E, EDRI E et al. Laser‐based printing: from liquids to microstructures[J]. Advanced Functional Materials, 31, 2008547(2021).

[36] GUO M, LIU X Y, LI T et al. Cross-scale topography achieved by MOPL with positive photoresist to regulate the cell behavior[J]. Small, 19, 2303572(2023).

[37] LI B, LIAO C, CAI Z et al. Femtosecond laser 3D printed micro objective lens for ultrathin fiber endoscope[J]. Fundamental Research, 4, 123-130(2024).

[38] ZHAO Y Y, LUO H C, LIANG Z X. Micro-nano 3D printing based on photopolymerization and its development status and trends[J]. Chinese Journal of Lasers, 49, 1002703(2022).

[39] HUANG L, HONG Z, CHEN Q D et al. Imaging/nonimaging microoptical elements and stereoscopic systems based on femtosecond laser direct writing[J]. Light: Advanced Manufacturing, 4, 543-569(2024).

[40] WANG H, PAN C F, LI C et al. Two-photon polymerization lithography for imaging optics[J]. International Journal of Extreme Manufacturing, 6, 042002(2024).

[41] MCKEE S, LUTEY A, SCIANCALEPORE C et al. Microfabrication of polymer microneedle arrays using two-photon polymerization[J]. Journal of Photochemistry and Photobiology B: Biology, 229, 112424(2022).

[42] KAWATA S, SUN H B, TANAKA T et al. Finer features for functional microdevices[J]. Nature, 412, 697-698(2001).

[43] DONG Y, HE X M, XU H. Review and challenges of photosensitive materials in two-photon lithography (invited)[J]. Chinese Journal of Lasers, 51, 1202406(2024).

[44] LIGHTMAN S, BIN-NUN M, BAR G et al. Structuring light using solgel hybrid 3D-printed optics prepared by two-photon polymerization[J]. Applied Optics, 61, 1434-1439(2022).

[45] [45] BIAN P, HU Z Y, AN R, et al. Femtosecond laser 3D nanoprinting f functionalization of optical fiber tips Laser & Photonics Reviews , 2024, 18(7): 2300957.

[46] O'HALLORAN S, PANDIT A, HEISE A et al. Two-photon polymerization: fundamentals, materials, and chemical modification strategies[J]. Advanced Science, 10, 2204072(2023).

[47] DADRAS-TOUSSI O, KHORRAMI M, LOUIS Sam Titus A S C et al. Multiphoton lithography of organic semiconductor devices for 3D printing of flexible electronic circuits, biosensors, and bioelectronics[J]. Advanced Materials, 34, 2200512(2022).

[48] SAKELLARI I, KABOURAKI E, KARANIKOLOPOULOS D et al. Quantum dot based 3D printed woodpile photonic crystals tuned for the visible[J]. Nanoscale Advances, 1, 3413-3423(2019).

[49] SUN Z B, DONG X Z, CHEN W Q et al. Multicolor polymer nanocomposites: in situ synthesis and fabrication of 3D microstructures[J]. Advanced Materials, 20, 914-919(2008).

[50] PHAM T A, KIM D P, LIM T W et al. Three-dimensional SiCN ceramic microstructures via nano-stereolithography of inorganic polymer photoresists[J]. Advanced Functional Materials, 16, 1235-1241(2006).

[51] PASSINGER S, SAIFULLAH M S M, REINHARDT C et al. Direct 3D patterning of TiO₂ using femtosecond laser pulses[J]. Advanced Materials, 19, 1218-1221(2007).

[52] YEE D W, LIFSON M L, EDWARDS B W et al. Additive manufacturing of 3D‐architected multifunctional metal oxides[J]. Advanced Materials, 31, 1901345(2019).

[53] WINCZEWSKI J, HERRERA M, CABRIEL C et al. Additive manufacturing of 3D luminescent ZrO₂: Eu³⁺ architectures[J]. Advanced Optical Materials, 10, 2102758(2022).

[54] VYATSKIKH A, DELALANDE S, KUDO A et al. Additive manufacturing of 3D nano-architected metals[J]. Nature Communications, 9, 593(2018).

[55] GAILEVIčIUS D, PADOLSKYTė V, MIKOLIŪNAITė L et al. Additive-manufacturing of 3D glass-ceramics down to nanoscale resolution[J]. Nanoscale Horizons, 4, 647-651(2019).

[56] BAUER J, CROOK C, BALDACCHINI T. A sinterless, low-temperature route to 3D print nanoscale optical-grade glass[J]. Science, 380, 960-966(2023).

[57] HONG Z, YE P, LOY D A et al. Three-dimensional printing of glass micro-optics[J]. Optica, 8, 904-910(2021).

[58] VAEZI M, SEITZ H, YANG S. A review on 3D micro-additive manufacturing technologies[J]. The International Journal of Advanced Manufacturing Technology, 67, 1721-1754(2013).

[59] PIKUL J H, GANG Zhang H, CHO J et al. High-power lithium ion microbatteries from interdigitated three-dimensional bicontinuous nanoporous electrodes[J]. Nature Communications, 4, 1732(2013).

[60] NELSON B J, KALIAKATSOS I K, ABBOTT J J. Microrobots for minimally invasive medicine[J]. Annual Review of Biomedical Engineering, 12, 55-85(2010).

[61] LIAO C R, LI B Z, ZOU M Q. Optical fiber integrated micro/nano-structured device fabricated by femtosecond laser induced two-photon polymerization and its applications[J]. Laser & Optoelectronics Progress, 58, 1306005(2021).

[62] ZHU D, JIANG S, LIAO C et al. Ultrafast laser 3D nanolithography of fiber-integrated silica microdevices[J]. Nano Letters, 24, 9734-9742(2024).

[63] DESPONDS A, BANYASZ A, CHATEAU D et al. 3D printing and pyrolysis of optical ZrO₂ nanostructures by two-photon lithography: reduced shrinkage and crystallization mediated by nanoparticles seeds[J]. Small, 17, 2102486(2021).

[64] WEN X, ZHANG B, WANG W et al. 3D-printed silica with nanoscale resolution[J]. Nature Materials, 20, 1506-1511(2021).

[65] TIAN Y, LU D, JIANG H et al. Preparation of a novel ferrofluidic photoresist for two-photon photopolymerization technique[J]. Journal of Magnetism and Magnetic Materials, 324, 3291-3294(2012).

[66] KOTZ F, ARNOLD K, BAUER W et al. Three-dimensional printing of transparent fused silica glass[J]. Nature, 544, 337-339(2017).

[67] KOTZ F, QUICK A S, RISCH P et al. Two-photon polymerization of nanocomposites for the fabrication of transparent fused silica glass microstructures[J]. Advanced Materials, 33, 2006341(2021).

[68] XIA H, WANG J, TIAN Y et al. Ferrofluids for fabrication of remotely controllable micro-nanomachines by two-photon polymerization[J]. Advanced Materials, 22, 3204-3207(2010).

[69] PENG Y, JRADI S, YANG X et al. 3D photoluminescent nanostructures containing quantum dots fabricated by two‐photon polymerization: influence of quantum dots on the spatial resolution of laser writing[J]. Advanced Materials Technologies, 4, 1800522(2019).

[70] XIONG W, LIU Y, JIANG L J et al. Laser-directed assembly of aligned carbon nanotubes in three dimensions for multifunctional device fabrication[J]. Advanced Materials, 28, 2002-2009(2016).

[71] CAO Y Y, TAKEYASU N, TANAKA T et al. 3D metallic nanostructure fabrication by surfactant-assisted multiphoton-induced reduction[J]. Small, 5, 1144-1148(2009).

[72] BLASCO E, MÜLLER J, MÜLLER P et al. Fabrication of conductive 3D gold-containing microstructures via direct laser writing[J]. Advanced Materials (Deerfield Beach, Fla), 28, 3592-3595(2016).

[73] YANG L, HU H, SCHOLZ A et al. Laser printed microelectronics[J]. Nature Communications, 14, 1103(2023).

[74] JIN F, LIU J, ZHAO Y Y et al. λ/30 inorganic features achieved by multi-photon 3D lithography[J]. Nature Communications, 13, 1357(2022).

[75] PAN J A, CHO H, COROPCEANU I et al. stimuli-responsive surface ligands for direct lithography of functional inorganic nanomaterials[J]. Accounts of Chemical Research, 56, 2286-2297(2023).

[76] LIU T, TAO P, WANG X et al. Ultrahigh-printing-speed photoresists for additive manufacturing[J]. Nature Nanotechnology, 19, 51-57(2024).

[77] LIU S F, HOU Z W, LIN L et al. 3D nanoprinting of semiconductor quantum dots by photoexcitation-induced chemical bonding[J]. Science, 377, 1112-1116(2022).

[78] LIU L, YANG D, WAN W et al. Fast fabrication of silver helical metamaterial with single-exposure femtosecond laser photoreduction[J]. Nanophotonics, 8, 1087-1093(2019).

[79] LI F, LIU S F, LIU W et al. 3D printing of inorganic nanomaterials by photochemically bonding colloidal nanocrystals[J]. Science, 381, 1468-1474(2023).

[80] FANG Z, HAQUE S, LIN J et al. Real-time electrical tuning of an optical spring on a monolithically integrated ultrahigh Q lithium nibote microresonator[J]. Optics Letters, 44, 1214-1217(2019).

[81] HUANG P H, LAAKSO M, EDINGER P et al. Three-dimensional printing of silica glass with sub-micrometer resolution[J]. Nature Communications, 14, 3305(2023).

[82] LI M, YUE L, RAJAN A C et al. Low-temperature 3D printing of transparent silica glass microstructures[J]. Science Advances, 9, eadi2958(2023).

[83] VYATSKIKH A, NG R C, EDWARDS B et al. Additive manufacturing of high-refractive-index, nanoarchitected titanium dioxide for 3D dielectric photonic crystals[J]. Nano Letters, 20, 3513-3520(2020).

[84] OVSIANIKOV A, VIERTL J, CHICHKOV B et al. Ultra-low shrinkage hybrid photosensitive material for two-photon polymerization microfabrication[J]. ACS Nano, 2, 2257-2262(2008).

[85] ZOU M, LIAO C, LIU S et al. Fiber-tip polymer clamped-beam probe for high-sensitivity nanoforce measurements[J]. Light: Science & Applications, 10, 171(2021).

[86] BAKHTINA N A, LOEFFELMANN U, MACKINNON N et al. Two-photon nanolithography enhances the performance of an ionic liquid-polymer composite sensor[J]. Advanced Functional Materials, 25, 1683-1693(2015).

[87] WILLIAMS J C, CHANDRAHALIM H, SUELZER J S et al. Multiphoton nanosculpting of optical resonant and nonresonant microsensors on fiber tips[J]. ACS Applied Materials & Interfaces, 14, 19988-19999(2022).

[88] CHEN M, ZHAO Y, WEI H et al. 3D printed castle style Fabry-Perot microcavity on optical fiber tip as a highly sensitive humidity sensor[J]. Sensors and Actuators B: Chemical, 328, 128981(2021).

[89] ZOU M, LIAO C, CHEN Y et al. 3D printed fiber-optic nanomechanical bioprobe[J]. International Journal of Extreme Manufacturing, 5, 015005(2023).

[90] HUANG R, LONG L, DENG Q et al. 3D printing of fiber-integrated plasmonic micro-grating tip enabling high-resolution real-time and in-site refractive index sensing[J]. Optics & Laser Technology, 167, 109796(2023).

[91] WEI H, WU Z, SUN K et al. Two-photon 3D printed spring-based Fabry–Pérot cavity resonator for acoustic wave detection and imaging[J]. Photonics Research, 11, 780-786(2023).

[92] XIN C, REN Z, ZHANG L et al. Light-triggered multi-joint microactuator fabricated by two-in-one femtosecond laser writing[J]. Nature Communications, 14, 4273(2023).

[93] LI R, JIANG M, LIU B et al. High-performance magnetic metal microrobot prepared by a two-photon polymerization and sintering method[J]. Lab on a Chip, 24, 832-842(2024).

[94] HU Y, WANG H, WANG D et al. In situ preparation of nano cone-like structures on 3D printed titanium alloy implants via one-step femtosecond laser manufacturing for better osseointegration, anti-corrosion, and anti-fatigue[J]. Journal of Materials Science & Technology, 206, 88-99(2025).

[95] SEITZ H, RIEDER W, IRSEN S et al. Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering[J]. J Biomed Mater Res B Appl Biomater, 74, 782-788(2005).

[96] MUELLER P, THIEL M, WEGENER M. 3D direct laser writing using a 405 nm diode laser[J]. Optics Letters, 39, 6847-6850(2014).

[97] GAN Z, CAO Y, EVANS R A et al. Three-dimensional deep sub-diffraction optical beam lithography with 9 nm feature size[J]. Nature Communications, 4, 2061(2013).

[98] SOMERS P, LIANG Z, JOHNSON J E et al. Rapid, continuous projection multi-photon 3D printing enabled by spatiotemporal focusing of femtosecond pulses[J]. Light: Science & Applications, 10, 199(2021).

[99] SAHA S K, WANG D, NGUYEN V H et al. Scalable submicrometer additive manufacturing[J]. Science, 366, 105-109(2019).

[100] [100] ZUBEL M. 3D printing f optical fibre applications[D]. Beckingham: Aston University, 2020.