[1] [1] ZHOU D, SHEN Y, XIONG D H, et al. Effects of scanning speed and Ni content on the characteristics of high-speed laser-clad coating［J］. Applied Laser, 2020, 40(4): 579-586.

[2] [2] LIU J, LIU H, TIAN X H, et al. Microstructural evolution and corrosion properties of Ni-based alloy coatings fabricated by multi-layer laser cladding on cast iron［J］. Journal of Alloys and Compounds, 2020, 822: 153708.

[3] [3] LIU H, HAO J B, HAN Z T, et al. Microstructural evolution and bonding characteristic in multi-layer laser cladding of NiCoCr alloy on compacted graphite cast iron［J］. Journal of Materials Processing Technology, 2016, 232: 153-164.

[4] [4] JIANG G Y, XIE J L, PANG M, et al. Microstructure and properties of Ni-based WC alloy by laser cladding of compacted graphite cast iron［J］. Laser & Optoelectronics Progress, 2020, 57(15): 151404.

[5] [5] JAVID Y. Multi-response optimization in laser cladding process of WC powder on Inconel 718［J］. CIRP Journal of Manufacturing Science and Technology, 2020, 31: 406-417.

[6] [6] ZHANG K. Study on laser remanufacturing of cast iron［D］. Hangzhou: Zhejiang University of Technology,2017.

[7] [7] ZHU L J, LIU Y H, LI Z W, et al. Microstructure and properties of Cu-Ti-Ni composite coatings on gray cast iron fabricated by laser cladding［J］. Optics & Laser Technology, 2020, 122: 105879.

[8] [8] LI Y J, DONG S Y, LIU X T, et al. Interface phase evolution during laser cladding of Ni-Cu alloy on nodular cast iron by powder pre-placed method［J］. Optics & Laser Technology, 2021, 135: 106684.

[9] [9] GU Y F, SU Y W, ZHU M, et al. Technology and forming characteristics of laser tungsten inert gas hybrid heat source surface cladding［J］. Journal of Shanghai Jiao Tong University, 2016, 50(12): 1902-1905.

[10] [10] LIU J H, LONG Y, FANG S G, et al. An experimental study on the optimization of grinding process parameters of face gears［J］. Journal of Hunan University of Technology, 2017, 31(4): 14-19.

[11] [11] SAEEDI R, SHOJA-RAZAVI R, BAKHSHI S R, et al. Optimization and characterization of laser cladding of NiCr and NiCr-TiC composite coatings on AISI 420 stainless steel［J］. Ceramics International, 2021, 47(3): 4097-4110.

[12] [12] SUN Y W, HAO M Z. Statistical analysis and optimization of process parameters in Ti6Al4V laser cladding using Nd: YAG laser［J］. Optics and Lasers in Engineering, 2012, 50(7): 985-995.

[13] [13] DONG D M, CHEN J F, LEI W N. Investigation on forming effect and dilution rate of laser cladded coating on 45 steel surface［J］. Hot Working Technology, 2019, 48(4): 163-166.

[14] [14] LI J N. Laser cladding technology and application［M］. Beijing：Chemical Industry Press,2016.