[1] Lin X, Xue L, Chen J et al. Laser forming repair of titanium alloy parts[J]. Aeronautical Manufacturing Technology, 53, 55-58(2010).

[2] Yu X N, Sun F Q, Liu X Y et al. Research on laser cladding repairing for defect on titanium alloy surface[J]. Aeronautical Manufacturing Technology, 54, 116-118(2011).

[3] Ren Y H, Shang C, Yang G et al. Microstructure and mechanical properties of laser deposition repair TA15 titanium alloy[J]. Applied Laser, 35, 150-154(2015).

[4] Lin X, Cao Y Q, Wu X Y et al. Microstructure and mechanical properties of laser forming repaired 17-4PH stainless steel[J]. Materials Science and Engineering: A, 553, 80-88(2012). http://www.sciencedirect.com/science/article/pii/S0921509312008015

[5] Wang W F, Wang M C, Jie Z et al. Research on the microstructure and wear resistance of titanium alloy structural members repaired by laser cladding[J]. Optics and Lasers in Engineering, 46, 810-816(2008).

[6] Yang J, Chen J, Yang J Q. Researches of mcrostructure and mechanical properties on TC18 titanium alloy wrought billet repaired by laser additive manufacturing[J]. Applied Laser, 33, 477-481(2013).

[7] Zhang J, Zhang Q L, Li D et al. Effect of δ aging treatment on microstructure and tensile properties of repaired inconel 718 alloy using laser additive manufacturing[J]. Chinese Journal of Lasers, 47, 0102001(2020).

[8] Zhao Z, Wang M, Chen J et al. Researches on microstructure and tensile properties of laser repaired β-riched Ti17 titanium alloy[J]. Applied Laser, 35, 271-276(2015).

[9] Xue L, Chen J, Lin X et al. Low cycle fatigue property of laser forming repaired TC4 forgings[J]. Rare Metal Materials and Engineering, 40, 1225-1229(2011).

[10] Chen J, Zhang Q, Liu Y H et al. Research on microstructure and high-temperature properties of Ti17 titanium alloy fabricated by laser solid forming[J]. Chinese Journal of Lasers, 38, 0603022(2011).

[11] Zhu Y Y, Li Z, Tian X J et al. Microstructure and mechanical properties of hybrid fabricated Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy by laser additive manufacturing[J]. Materials Science and Engineering A, 607, 427-434(2014). http://smartsearch.nstl.gov.cn/paper_detail.html?id=91f8773d77aeab8fe17d5095d95a64d8

[12] He X D. Study on technology and properties of laser hybrid fabricated based on TA15 titanium alloy forging[D](2019).

[13] Gong X Y, Liu M K, Li Y et al. Research on repair of TC11 titanium alloy components by laser melting deposition process[J]. Chinese Journal of Lasers, 39, 0203005(2012).

[14] Xu L, Huang S J, Wang L et al. Fatigue properties of laser deposited repaired TA15 titanium alloy[J]. Rare Metal Materials and Engineering, 46, 1943-1948(2017).

[15] Yang G, Ma Y, Wang C et al. Effects of additive repair on microstructure and mechanical properties of laser additive manufactured TC4 titanium[J]. Chinese Journal of Lasers, 45, 1202002(2018).

[16] Zhang Q, Chen J, Tan H et al. Influence of solution treatment on microstructure evolution of TC21 titanium alloy with near equiaxed β grains fabricated by laser additive manufacture[J]. Journal of Alloys and Compounds, 666, 380-386(2016).

[17] Yu J, Lin X, Ma L et al. Influence of laser deposition patterns on part distortion, interior quality and mechanical properties by laser solid forming (LSF)[J]. Materials Science and Engineering: A, 528, 1094-1104(2011). http://www.sciencedirect.com/science/article/pii/S092150931001124X

[18] Zhang Q, Chen J, Han C X et al. The effect of laser repair heat affected zone depth on the tensile properties of TC17-TC11 dual alloy[J]. Applied Laser, 32, 267-271(2012).

[19] Liu Z, Qin Z X, Liu F et al. The microstructure and mechanical behaviors of the Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy produced by laser melting deposition[J]. Materials Characterization, 97, 132-139(2014).

[20] Yang Y, Xu F, Huang A J et al. Evolution of microstructure of full lamellar titanium alloy BT18Y solutionized at α+β phase field[J]. Acta Metallrugica Sinica, 41, 713-720(2005).

[21] Zhu Y Y, Liu D, Tian X J et al. Characterization of microstructure and mechanical properties of laser melting deposited Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy[J]. Materials & Design, 56, 445-453(2014). http://www.sciencedirect.com/science/article/pii/S0261306913010935

[22] Ren H S, Tian X J, Liu D et al. Microstructural evolution and mechanical properties of laser melting deposited Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy[J]. Transactions of Nonferrous Metals Society of China, 25, 1856-1864(2015).

[23] Carroll B E, Palmer T A, Beese A M. Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing[J]. Acta Materialia, 87, 309-320(2015). http://www.sciencedirect.com/science/article/pii/S135964541400980X

[24] Qiu Y, Zhang F Y, Hu T T et al. Effect of laser power on microstructure and hardness of Ti40 flame-retardant titanium alloy deposited by laser cladding on TC4 surface[J]. Chinese Journal of Lasers, 46, 1102011(2019).

[25] Pan B, Huang Y C, Li L Q et al. Effects of multiple laser repairs on microstructure and hardness of ZTC4 titanium alloy[J]. Chinese Journal of Lasers, 46, 1002011(2019).