[1] [1] Lu Bingbing. Analysis and optimization for auto roof to body-side laser welding［J］. Chinese J. Lasers, 2010, 37(5): 1375～1379

[2] [2] Chen Genyu, Chen Fei, Zhang Yi et al.. Effect of butt joint gap to high-strength automobile steel of fiber laser welding［J］. Chinese J. Lasers, 2011, 38(6): 0603013

[3] [3] Zhang Jian, Yang Rui. Prediction on light intensity distribution of laser melt pool base on radial basis function meural network［J］. Chinese J. Lasers, 2010, 37(7): 1856～1860

[4] [4] Zhang Yi, Li Shichun, Jin Xiangzhong et al.. Research on the key technology of laser welding of galvanized steel［J］. Laser & Optoelectronics Progress, 2010, 46(7): 071401

[5] [5] Gao Shiyi, Wu Ruimin, Chen Weidong et al.. Development status of laser welding process monitor and seam quality detection［J］. World Iron & Steel, 2010, 10(3): 51～54

[6] [6] Duan Aiqin, Hu Lunji, Wang Yajun. Research on weld penetration monitoring by laser plasma optical signal in laser welding［J］. Chinese J. Lasers, 2005, 32(1): 131～134

[7] [7] Zeng Hao, Zhou Zude, Chen Youping et al.. Real-time in-process monitoring of laser welding［J］. Chinese J. Lasers, 2001, A28(3): 284～288

[8] [8] Wang Chunming, Yu Fulin, Duan Aiqin. The relationship between penetration and plasma optical signal of deep non-penetrating laser welding［J］. Transactions of the China Welding Institution, 2002, 23(5): 45～49

[9] [9] Li Mingxing. Laser Welding of Zinc-Coated Steels with Filler Powder［D］. Beijing: Beijing University of Technology, 2006. 6～9

[10] [10] Xiong Jiangang, Hu Lunji, Liu Jianhua et al.. Study on laser welding of zinc coated steel and the effects of zinc vaporization［J］. Laser Technology, 1998, 22(1): 26～28

[11] [11] Cui Huaiyang, Chen Kai, Zuo Tiechuan. CO2 laser welding of galvanized steel welding［J］. Transactions of The China Welding Institution, 2004, 25(4): 115～118

[12] [12] A. Loredo, B. Martin, H. Andrzejewski et al.. Numerical support for laser welding of zinc-coated sheets process development［J］. Applied Surface Science, 2002, 195: 297～303

[13] [13] Weichiat Chen, Paul Ackerson, Pal Molian. CO2 laser welding of galvanized steel sheets using vent holes［J］. Materials and Design, 2009, 30: 245～251

[14] [14] Tang Xiahui, Zhou Yi, Li Shimin et al.. Study of laser-induced plasma behavior and control during laser deep penetration welding of powder materials［J］. Chinese J. Lasers, 2004, 31(2): 237～240

[15] [15] Zhang Shenghai, Chen Kai, Xiao Rongshi et al.. Influence of metal powder on high power CO2 laser welding of aluminum alloy［J］. Chinese J. Lasers, 2005, 32(6): 860～863

[16] [16] Guohua Li, Yan Cai, Yixiong Wu. Stability information in plasma image of high-power CO2 laser welding［J］. Opt. & Lasers in Engng., 2009, 47: 990～994

[17] [17] Xin Renxuan. Spectrum Analysis of Plasma Emission［M］. Beijing: Chemical Industry Press, 2005. 19～21