[1] Wu M M, Li L P, Gao X Q et al. Research progress of molybdenum-based composites prepared by powder metallurgy technology[J]. Powder Metallurgy Technology, 39, 462-470(2021).

[2] An X Z, Xing Z T, Jia C C. Cold compaction of copper powders under mechanical vibration and uniaxial compression[J]. Metallurgical and Materials Transactions A, 45, 2171-2179(2014).

[3] Chen Z H. A theoretical study on dynamic compaction of metal powders[J]. Journal of Central-South Institute of Mining and Metallurgy, 14, 117-125(1983).

[4] Wang J Z, Qu X H, Yin H Q et al. High velocity compaction of ferrous powder[J]. Powder Technology, 192, 131-136(2009).

[5] Wang J Z, Yin H Q, Qu X H et al. Effect of multiple impacts on high velocity pressed iron powder[J]. Powder Technology, 195, 184-189(2009).

[6] Cui J J, Huang X S, Dong D Y et al. Effect of discharge energy of magnetic pulse compaction on the powder compaction characteristics and spring back behavior of copper compacts[J]. Metals and Materials International, 27, 3385-3397(2021).

[7] Namazi N, Alitavoli M, Babaei H. Effects of loading rate range on mechanical and microstructural properties of dynamically compacted iron powder[J]. Metals and Materials International, 27, 4097-4109(2021).

[8] Yan Z Q, Chen F, Cai Y X et al. Influence of particle size on property of Ti-6Al-4V alloy prepared by high-velocity compaction[J]. Transactions of Nonferrous Metals Society of China, 23, 361-365(2013).

[9] Vivek A, DeFouw J D, Daehn G S. Dynamic compaction of titanium powder by vaporizing foil actuator assisted shearing[J]. Powder Technology, 254, 181-186(2014).

[10] Huang S Y, Chang Z H, Tian Z W et al. Experimental research on low-voltage electromagnetic compaction of powder materials[J]. Journal of Plasticity Engineering, 8, 10-13(2001).

[11] Babaei H, Mostofi T M, Namdari-Khalilabad M et al. Gas mixture detonation method, a novel processing technique for metal powder compaction: experimental investigation and empirical modeling[J]. Powder Technology, 315, 171-181(2017).

[12] Gu Y B, Ravichandran G. Dynamic behavior of selected ceramic powders[J]. International Journal of Impact Engineering, 32, 1768-1785(2006).

[13] Huang Y, Zhou J Z, Li J et al. Effects of cryogenic laser peening on damping characteristics and vibration fatigue life of TC6 titanium alloy[J]. Chinese Journal of Lasers, 47, 0402011(2020).

[14] Pu T Y, Liu W W, Wang Y L et al. A novel laser shock post-processing technique on the laser-induced damage resistance of 1ω HfO2/SiO2[J]. High Power Laser Science and Engineering, 2, 127-134(2021).

[15] Zheng C, Ji Z, Song L B et al. Variation of fracture mode in micro-scale laser shock punching[J]. Optics & Laser Technology, 72, 25-32(2015).

[16] Wang X, Yuan Y Q, Shen Z B et al. Investigation of the forming pressure and formability of metal foil by laser-driven multi-layered flyer[J]. Optics & Laser Technology, 58, 151-160(2014).

[17] Yang H F, Man J X, Xiong F et al. Technology and mechanism on warm laser shock imprinting of aluminum foils[J]. Chinese Journal of Lasers, 48, 0602118(2021).

[18] Wang X, Gu C X, Zheng Y Y et al. Laser shock welding of aluminum/aluminum and aluminum/copper plates[J]. Materials & Design, 56, 26-30(2014).

[19] Voorhees T J, Steiner J W, Kennedy G B et al. The effect of initial pressed density on the dynamic densification behavior of brittle granular materials[C], 2272, 110014(2020).

[20] Dong D Y, Huang X S, Li G Y et al. Study on mechanical characteristics, microstructure and equation of copper powder compaction based on electromagnetic compaction[J]. Materials Chemistry and Physics, 253, 123449(2020).

[21] Park H Y, Kilicaslan M F, Hong S J. Effect of multiple pressures by magnetic pulsed compaction (MPC) on the density of gas-atomized Al-20Si powder[J]. Powder Technology, 224, 360-364(2012).