[2] Hambling D. US Army laser weapon to be most powerful ever[P]. The New Scientist, 12(2021).

[4] XIONG Y, YAN K, YU H Y et al. Comparative investigation on the hot corrosion failure of YSZ and GdYb-YSZ double-ceramic- layer thermal barrier coatings under Na₂SO₄+V₂O₅ molten salts[J]. Ceramics International, 18678(2023).

[5] SHAO J, JITSUNO T, RUDOLPH W et al. Study on high power CW laser's irradiation effect on yttria-stabilized zirconia coating[conf-proc]. Society of Photo-Optical Instrumentation Engineers (SPIE) Conference Series, 1(2017).

[6] ZOU Y, ZHAO L L, YOU L J et al. Preparation and numerical simulation investigation of high reflectance anti-laser-ablation coating[J]. Journal of Inorganic Materials, 869(2016).

[7] CHEN Y, PING C, HONG C et al. Improved ablation resistance of carbon-phenolic composites by introducing zirconium diboride particles[J]. Composites Part B, 320(2013).

[8] CHEN S, ZHANG C, ZHANG Y et al. Effects of polymer derived SiC interphase on the properties of C/ZrC composites[J]. Materials and Design, 102(2014).

[9] HORCHER A, TANGERMANN-GERK K, BARROSO G et al. Laser and furnace pyrolyzed organosilazane-based glass/ZrO₂ composite coating system-a comparison[J]. Journal of the European Ceramic Society, 2642(2019).

[10] LIU R, LIU X Y, WANG Y F et al. Laser ablation behavior and mechanism of C_f/SiC-ZrC ultra-high temperature ceramic matrix composite prepared by PIP method[J]. Ceramics International, 23610(2021).

[11] Kiyohito, Okamura, Tadao et al. Application of radiation curing in the preparation of polycarbosilane-derived SiC fibers[J]. Journal of Inorganic & Organometallic Polymers, 171(1992).

[12] FEI Y W, YU X F, TANG W H et al. Study on SiC fine ceramic anti-laser reinforcement material[J]. Ordnance Material Science and Engineering, 39(2001).

[13] NIU J H, MENG S H, JIN H et al. Thermal stability and nanostructure evolution of amorphous SiCN ceramics during laser ablation in an argon atmosphere[J]. Journal of the European Ceramic Society, 4535(2019).

[15] XIE Z F, CHEN Z H, LI Y Q et al. Application of active fillers in the preparation of polycarbosilane derived ceramics[J]. Journal of National University of Defense Technology, 27(2000).

[16] TINGA C C, CHENA S Y, LIUB D M et al. Preferential growth of thin rutile TiO₂ films upon thermal oxidation of sputtered Ti films[J]. Thin Solid Films, 290(2002).

[17] PAN Y Y, LIANG B, HONG D et al. High temperature long-term service performance of TiAlCrY/YSZ coating on TiAl alloy[J]. Journal of Inorganic Materials, 105(2023).

[18] PAN Y Y, LIANG B, NIU Y R et al. Thermal shock behaviors of plasma sprayed YSZ/TiAlCrY system on TiAl alloy[J]. Ceramics International, 6199(2022).

[19] LY H Q, TAYLOR R, DAY R J et al. Conversion of polycarbosilane (PCS) to SiC-based ceramic Part 1. Characterisation of PCS and curing products[J]. Journal of Materials Science, 4037(2001).

[20] YUAN Q, SONG Y C, LI Y Q et al. Synthesis and properties of a high ceramic yield thermosetting polycarbosilane[J]. Silicone Material, 380(2011).

[21] FANG Y H, HUANG M H, YU Z Y et al. Synthesis, characterization and pyrolytic conversion of a novel liquid polycarbosilane[J]. Journal of the American Ceramic Society, 3298(2008).

[22] CABEZAS-RODRIGUEZ R, CIRIA D, MARTINEZ-FERNANDEZ J et al. High temperature mechanical properties of polycrystalline Y₂SiO₅[J]. Journal of the Spanish Ceramic and Glass Society, 60(2022).