[1] Galashov E N, Yusuf A A, Mandrik E M et al. Preparation and thermo-physical parameters of diamond/W,Cu heat-conducting composite substrates[J]. The International Journal of Advanced Manufacturing Technology, 86, 475-478(2016). http://link.springer.com/article/10.1007/s00170-015-8186-8

[2] Ding W Y, He H Y, Pan B C. Structural features and thermal properties of W/Cu compounds using tight-binding potential calculations[J]. Journal of Materials Science, 51, 5948-5961(2016). http://link.springer.com/article/10.1007/s10853-016-9896-5

[3] Zheng L L, Liu J X, Li S K et al. Preparation and properties of W-Cu-Zn alloy with low W-W contiguity[J]. Rare Metals, 35, 242-248(2016). http://www.cqvip.com/QK/85314X/201603/668505466.html

[4] Liu B B, Chen J H, Xie J X. Fabrication of W/Cu20 composite materials with nearly full density by particle size distribution method[J]. Rare Metal Materials and Engineering, 39, 17-21(2010). http://www.sciencedirect.com/science/article/pii/S1875537210600744

[5] Chen P G, Shen Q, Luo G Q et al. The mechanical properties of W-Cu composite by activated sintering[J]. International Journal of Refractory Metals and Hard Materials, 36, 220-224(2013). http://www.sciencedirect.com/science/article/pii/S0263436812001680

[6] Ibrahim H, Aziz A, Rahmat A. Enhanced liquid-phase sintering of W-Cu composites by liquid infiltration[J]. International Journal of Refractory Metals and Hard Materials, 43, 222-226(2014). http://www.sciencedirect.com/science/article/pii/S0263436813002564

[7] Yih S W H, Wang C T[M]. Tungsten sources, metallurgy, properties and applications(1979).

[8] Ziółkowski G, Chlebus E, Szymczyk P et al. Application of X-ray CT method for discontinuity and porosity detection in 316L stainless steel parts produced with SLM technology[J]. Archives of Civil and Mechanical Engineering, 14, 608-614(2014). http://www.sciencedirect.com/science/article/pii/S1644966514000405

[9] LeBrun T, Nakamoto T, Horikawa K et al. . Effect of retained austenite on subsequent thermal processing and resultant mechanical properties of selective laser melted 17-4 PH stainless steel[J]. Materials & Design, 81, 44-53(2015). http://www.sciencedirect.com/science/article/pii/S0261306915002721

[10] Liu Z H, Zhang D Q, Sing S L et al. Interfacial characterization of SLM parts in multi-material processing: metallurgical diffusion between 316L stainless steel and C18400 copper alloy[J]. Materials Characterization, 94, 116-125(2014). http://www.sciencedirect.com/science/article/pii/S1044580314001351

[11] Delgado J, Ciurana J, Rodríguez C A. Influence of process parameters on part quality and mechanical properties for DMLS and SLM with iron-based materials[J]. The International Journal of Advanced Manufacturing Technology, 60, 601-610(2012). http://link.springer.com/article/10.1007/s00170-011-3643-5

[12] Wang D, Mai S Z, Xiao D M et al. Surface quality of the curved overhanging structure manufactured from 316-L stainless steel by SLM[J]. The International Journal of Advanced Manufacturing Technology, 86, 781-792(2016). http://link.springer.com/article/10.1007/s00170-015-8216-6

[13] Li R D, Liu J H, Shi Y S et al. Balling behavior of stainless steel and nickel powder during selective laser melting process[J]. The International Journal of Advanced Manufacturing Technology, 59, 1025-1035(2012). http://link.springer.com/article/10.1007/s00170-011-3566-1

[14] Yan A R, Yang T T, Wang Y L et al. Forming process and high-temperature mechanical properties of variable energy laser selective melting manufacturing IN718 superalloy[J]. Optics and Precision Engineering, 23, 1695-1704(2015).

[15] Trosch T, Strößner J, Völkl R et al. Microstructure and mechanical properties of selective laser melted Inconel 718 compared to forging and casting[J]. Materials Letters, 164, 428-431(2016). http://www.sciencedirect.com/science/article/pii/S0167577X15307850

[16] Lu Y J, Wu S Q, Gan Y L et al. Study on the microstructure, mechanical property and residual stress of SLM Inconel-718 alloy manufactured by differing island scanning strategy[J]. Optics & Laser Technology, 75, 197-206(2015). http://www.sciencedirect.com/science/article/pii/S0030399215002108

[17] Geiger F, Kunze K, Etter T. Tailoring the texture of IN738LC processed by selective laser melting (SLM) by specific scanning strategies[J]. Materials Science and Engineering: A, 661, 240-246(2016).

[18] Wang F D. Mechanical property study on rapid additive layer manufacture Hastelloy ® X alloy by selective laser melting technology [J]. The International Journal of Advanced Manufacturing Technology, 58, 545-551(2012). http://www.emeraldinsight.com/servlet/linkout?suffix=b22&dbid=16&doi=10.1108%2F13552541311323281&key=10.1007%2Fs00170-011-3423-2

[19] Hazlehurst K B, Wang C J, Stanford M. An investigation into the flexural characteristics of functionally graded cobalt chrome femoral stems manufactured using selective laser melting[J]. Materials & Design, 60, 177-183(2014). http://www.sciencedirect.com/science/article/pii/S0261306914002611

[20] Qian B, Saeidi K, Kvetková L et al. Defects-tolerant Co-Cr-Mo dental alloys prepared by selective laser melting[J]. Dental Materials, 31, 1435-1444(2015). http://www.ncbi.nlm.nih.gov/pubmed/26452598

[21] Hazlehurst K, Wang C J, Stanford M. Evaluation of the stiffness characteristics of square pore CoCrMo cellular structures manufactured using laser melting technology for potential orthopaedic applications[J]. Materials & Design, 51, 949-955(2013). http://www.sciencedirect.com/science/article/pii/S0261306913004342

[22] Lu Y J, Wu S Q, Gan Y L et al. Microstructure, mechanical property and metal release of As-SLM CoCrW alloy under different solution treatment conditions[J]. Journal of the Mechanical Behavior of Biomedical Materials, 55, 179-190(2016). http://europepmc.org/abstract/MED/26590910

[23] Dai N W, Zhang L C, Zhang J X et al. Corrosion behavior of selective laser melted Ti-6Al-4V alloy in NaCl solution[J]. Corrosion Science, 102, 484-489(2016). http://www.sciencedirect.com/science/article/pii/S0010938X15301402

[24] Song B, Dong S J, Liao H L et al. Process parameter selection for selective laser melting of Ti6Al4V based on temperature distribution simulation and experimental sintering[J]. The International Journal of Advanced Manufacturing Technology, 61, 967-974(2012). http://link.springer.com/article/10.1007/s00170-011-3776-6

[25] Zhang L C, Attar H. Selective laser melting of titanium alloys and titanium matrix composites for biomedical applications: a review[J]. Advanced Engineering Materials, 18, 463-475(2016). http://onlinelibrary.wiley.com/doi/10.1002/adem.201500419/pdf

[26] Attar H, Prashanth K G, Chaubey A K et al. Comparison of wear properties of commercially pure titanium prepared by selective laser melting and casting processes[J]. Materials Letters, 142, 38-41(2015). http://www.sciencedirect.com/science/article/pii/s0167577x14021594

[27] Wang X, Wraith M, Burke S et al. Densification of W-Ni-Fe powders using laser sintering[J]. International Journal of Refractory Metals and Hard Materials, 56, 145-150(2016). http://www.sciencedirect.com/science/article/pii/S0263436815302626

[28] Wang Y Y, Wang A H, Weng Z K et al. Laser transmission welding of clearweld-coated polyethylene glycol terephthalate by incremental scanning technique[J]. Optics & Laser Technology, 80, 153-161(2016). http://www.sciencedirect.com/science/article/pii/S0030399215304060

[29] Zhang D Q, Cai Q Z, Liu J H et al. Microstructural evolvement and formation of selective laser melting W-Ni-Cu composite powder[J]. The International Journal of Advanced Manufacturing Technology, 67, 2233-2242(2013). http://link.springer.com/article/10.1007/s00170-012-4644-8

[30] Kumar S. Sliding wear behavior of dedicated iron-based SLS materials[J]. The International Journal of Advanced Manufacturing Technology, 43, 337-347(2009). http://link.springer.com/article/10.1007/s00170-008-1714-z

[31] Gu D D, Shen Y F. Effects of processing parameters on consolidation and microstructure of W-Cu components by DMLS[J]. Journal of Alloys and Compounds, 473, 107-115(2009). http://www.sciencedirect.com/science/article/pii/S0925838808008256

[32] Chen P G, Luo G Q, Shen Q et al. Thermal and electrical properties of W-Cu composite produced by activated sintering[J]. Materials & Design, 46, 101-105(2013). http://www.sciencedirect.com/science/article/pii/S0261306912006656

[33] Lee Y J, Lee B H, Kim G S et al. Evaluation of conductivity in W-Cu composites through the estimation of topological microstructures[J]. Materials Letters, 60, 2000-2003(2006). http://www.sciencedirect.com/science/article/pii/S0167577X05013212

[34] Gu D D, Meiners W, Wissenbach K et al. Laser additive manufacturing of metallic components: materials, processes and mechanisms[J]. International Materials Reviews, 57, 133-164(2012). http://www.tandfonline.com/doi/full/10.1179/1743280411Y.0000000014

[35] Chawla N. ShenY L. Mechanical behavior of particle reinforced metal matrix composites[J]. Advanced Engineering Materials, 3, 357-370(2001).

[36] Wang C P, Lin L C, Xu L S et al. Effect of blue tungsten oxide on skeleton sintering and infiltration of W-Cu composites[J]. International Journal of Refractory Metals and Hard Materials, 41, 236-240(2013). http://www.sciencedirect.com/science/article/pii/S0263436813000826

[37] Fang X L, Liu J X, Wang X et al. Study on improving “self-sharpening” capacity of W-Cu-Zn alloy by the pressureless infiltration method[J]. Materials Science and Engineering: A, 607, 454-459(2014). http://www.sciencedirect.com/science/article/pii/S0921509314004602

[38] Duan L H, Lin W S, Wang J L et al. Thermal properties of W-Cu composites manufactured by copper infiltration into tungsten fiber matrix[J]. International Journal of Refractory Metals and Hard Materials, 46, 96-100(2014). http://www.sciencedirect.com/science/article/pii/S0263436814001103

[39] Xie X L, Lin Q, Liu D et al. Research on the densification of W-30wt%Cu composite powder by hot extrusion with steel cup[J]. Materials Science and Engineering: A, 578, 187-190(2013).

[40] Johnson J L, Brezovsky J J, German R M. Effect of liquid content on distortion and rearrangement densification of liquid-phase-sintered W-Cu[J]. Metallurgical and Materials Transactions A, 36, 1557-1565(2005). http://link.springer.com/article/10.1007/s11661-005-0247-4

[41] Randall M. German. A model for the thermal properties of liquid phase sintered composites[J]. Metallurgical Transaction A, 24, 1745-1752(1993). http://www.osti.gov/scitech/biblio/5604768

[42] El-Hadek M A, Kaytbay S H. Fracture properties of SPS tungsten copper powder composites[J]. Metallurgical and Materials Transactions A, 44, 544-551(2013). http://link.springer.com/article/10.1007/s11661-012-1396-x

[43] Niu Y R, Wang Z, Zhao J et al. Comparison of ZrB2-MoSi2 composite coatings fabricated by atmospheric and vacuum plasma spray processes[J]. Journal of Thermal Spray Technology, 26, 100-107(2017). http://link.springer.com/article/10.1007%2Fs11666-016-0490-9

[44] Zhang L M, Chen W S, Luo G Q et al. Low-temperature densification and excellent thermal properties of W-Cu thermal-management composites prepared from copper-coated tungsten powders[J]. Journal of Alloys and Compounds, 588, 49-52(2014). http://www.sciencedirect.com/science/article/pii/S0925838813027333

[45] Guan Z D, Zhang Z T, Jiao J S[M]. Physical property of inorganic materials(2011).

[46] Rosinski M, Fortuna E, Michalski A et al. W/Cu composites produced by pulse plasma sintering technique (PPS)[J]. Fusion Engineering and Design, 82, 2621-2626(2007). http://www.sciencedirect.com/science/article/pii/S0920379607003237

[47] Johnson J L. Activated liquid phase sintering of W-Cu and Mo-Cu[J]. International Journal of Refractory Metals and Hard Materials, 53, 80-86(2015). http://www.sciencedirect.com/science/article/pii/S0263436815300317

[48] Zhang K, Shi Z Q, Xia H Y et al. Preparation and thermophysical properties of directional SiC/Cu-Si composite via spontaneous infiltration[J]. Ceramics International, 42, 996-1001(2016). http://www.sciencedirect.com/science/article/pii/S0272884215016995

[49] Zhou X, Liu X H, Zhang D D et al. Balling phenomena in selective laser melted tungsten[J]. Journal of Materials Processing Technology, 222, 33-42(2015). http://www.sciencedirect.com/science/article/pii/S0924013615000825

[50] Ventola L, Robotti F, Dialameh M et al. Rough surfaces with enhanced heat transfer for electronics cooling by direct metal laser sintering[J]. International Journal of Heat and Mass Transfer, 75, 58-74(2014). http://www.sciencedirect.com/science/article/pii/S0017931014002439