[1] [1] XU Q H, CHEN Q Y. Energy transition strategy of Chinese oil&gas companies and their green financial routes under the carbon neutrality tendency(Ⅱ)［J］. China Oil & Gas, 2021(2): 35-40.

[3] [3] ROITZHEIM C, KUO L Y, SOHN Y J, et al. Boron in Ni-rich NCM811 cathode material: impact on atomic and microscale properties［J］. ACS Applied Energy Materials, 2022, 5(1): 524-538.

[4] [4] LI X L, JIN L B, SONG D W, et al. LiNbO3-coated LiNi0.8Co0.1Mn0.1O2 cathode with high discharge capacity and rate performance for all-solid-state lithium battery［J］. Journal of Energy Chemistry, 2020, 40: 39-45.

[5] [5] SIM S J, LEE S H, JIN B S, et al. Use of carbon coating on LiNi0.8Co0.1Mn0.1O2 cathode material for enhanced performances of lithium-ion batteries［J］. Scientific Reports, 2020, 10: 11114.

[6] [6] HAN B H, KEY B, LAPIDUS S H, et al. From coating to dopant: how the transition metal composition affects alumina coatings on Ni-rich cathodes［J］. ACS Applied Materials & Interfaces, 2017, 9(47): 41291-41302.

[7] [7] WANG L F, LIU G Y, DING X N, et al. Simultaneous coating and doping of a nickel-rich cathode by an oxygen ion conductor for enhanced stability and power of lithium-ion batteries［J］. ACS Applied Materials & Interfaces, 2019, 11(37): 33901-33912.

[8] [8] XIONG X H, WANG Z X, YAN G C, et al. Role of V2O5 coating on LiNiO-2 based materials for lithium ion battery［J］. Journal of Power Sources, 2014, 245: 183-193.

[9] [9] SCHIPPER F, BOUZAGLO H, DIXIT M, et al. From surface ZrO2 coating to bulk Zr doping by high temperature annealing of nickel-rich lithiated oxides and their enhanced electrochemical performance in lithium ion batteries［J］. Advanced Energy Materials, 2018, 8(4): 1701682.

[10] [10] ZHANG H L, XU J Q, ZHANG J J. Surface-coated LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode materials by Al2O3, ZrO2, and Li2O-2B2O3 thin-layers for improving the performance of lithium ion batteries［J］. Frontiers in Materials, 2019, 6: 309.

[11] [11] ZHOU L, TIAN M J, DENG Y L, et al. La2O3-coated Li1.2Mn0.54Ni0.13Co0.13O2 as cathode materials with enhanced specific capacity and cycling stability for lithium-ion batteries［J］. Ceramics International, 2016, 42(14): 15623-15633.

[12] [12] CHEN Z X, ZHANG Q G, TANG W J, et al. Ultrahigh capacity retention of a Li2ZrO3-coated Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode material through covalent interfacial engineering［J］. ACS Applied Energy Materials, 2021, 4(12): 13785-13795.

[13] [13] TANG W J, CHEN Z X, XIONG F, et al. An effective etching-induced coating strategy to shield LiNi0.8Co0.1Mn0.1O2 electrode materials by LiAlO2［J］. Journal of Power Sources, 2019, 412: 246-254.

[14] [14] ZHANG B, DONG P Y, TONG H, et al. Enhanced electrochemical performance of LiNi0.8Co0.1Mn0.1O2 with lithium-reactive Li3VO4 coating［J］. Journal of Alloys and Compounds, 2017, 706: 198-204.

[15] [15] ZHANG J F, ZHANG J Y, OU X, et al. Enhancing high-voltage performance of Ni-rich cathode by surface modification of self-assembled NASICON fast ionic conductor LiZr2(PO4)3［J］. ACS Applied Materials & Interfaces, 2019, 11(17): 15507-15516.

[16] [16] WOO S W, MYUNG S T, BANG H, et al. Improvement of electrochemical and thermal properties of Li［Ni0.8Co0.1Mn0.1］O2 positive electrode materials by multiple metal (Al, Mg) substitution［J］. Electrochimica Acta, 2009, 54(15): 3851-3856.

[20] [20] WU F, LIU N, CHEN L, et al. Improving the reversibility of the H2-H3 phase transitions for layered Ni-rich oxide cathode towards retarded structural transition and enhanced cycle stability［J］. Nano Energy, 2019, 59: 50-57.