[1] [1] LU B H, LI D Ch. Development of the additive manufacturing (3-D printing) technology[J]. Machine Building & Automation, 2013,42(4): 1-4 (in Chinese).

[2] [2] SHEN Q, YU S, NIU J L, et al. Selective laser melting of magnesium-based materials: A review[J]. Materials Reports, 2019,33(1):278-282(in Chinese).

[3] [3] TIAN J, HUANG Zh H, QI W J, et al. Research progress on selective laser melting of metal[J]. Materials Reports, 2017,31(29): 90-101(in Chinese).

[4] [4] WOHLERS T.Additive manufacturing and 3-D printing state of industry[R].Auckland, New Zealand: Wohlers Reports ,2012:90-130.

[5] [5] ADAM T C, PAUL R C. Selective laser melting of high aspect ratio 3-D nickel-titanium structures two way trained for MEMS applications[J].International Journal of Mechanics and Design, 2008,38(4):181-187.

[6] [6] BANDYYOPADHYAY A, KRISHNA B V K, XUE W C, et al. Application of laser engineered net shaping (LENS) to manufacture porous and functionally graded structures for load bearing implants[J]. Journal of Materials Science: Materials in Medicine, 2009, 48(20):29-34.

[7] [7] YADROITSEY I. SHISHKOYSKY I, BERTRAND P. Manufacturing of fine-structured 3-D porous filter elements by selective laser melting[J]. Applied Surface Science, 2009, 58(255):5523-5527.

[8] [8] DAY R, KOP A. Heat treatment of Ti-6Al-7Nb components produced by selective laser melting[J]. Rapid Prototyping Journal, 2008,14(5):300-304.

[9] [9] QIAO G. Generalized additive manufacturing based on welding/joining technologies[J]. The Paton Welding Journal, 2013,67(10/11):33-38.

[10] [10] ZENG G, HAN Zh Y, LIANG Sh J, et al . The applications and progress of manufacturing of metal parts by printing technology[J]. Materials China, 2014,33(6):376-382(in Chinese).

[11] [11] KRUTH J P, FROYEN L. Selective laser melting of iron-based powder[J]. Journal of Materials Processing Technology, 2004, 149(1/3):616-622.

[12] [12] SIMEHI A. Direct laser sintering of metal powders: Mechanism, kinetics and microstructural features[J]. Materials Science and Engineering A, 2006, 428(1/2):148-158.

[13] [13] ALBERTO J C, SALAZAZ A, RODRIGUE J. Effect of the orientation on the fatigue crack growth of polyamide 12 manufactured by selective laser sintering[J]. Rapid Prototyping Journal, 2019, 124(16):820-829.

[14] [14] MEIER H, HABERLAND C. Experimental studies on selective laser melting of metallic parts[J]. Material Wissenschaft und Werkstofftechnik, 2008, 39(9):665-670.

[15] [15] ABE F, SANTOS E C, KITAMURA Y, et al. Influence of forming conditions on the titanium model in rapid prototyping with the selective laser melting process[J]. Proceedings of the Institution of Mechanical Engineers Part C:Journal of Mechanical Engineering Science. 2003,217(l):119-126.

[16] [16] RAFIEAZAD M, CHATTERJEE A, NASIRI A M. Effects of recycled powder on solidification defects, microstructure, and corrosion properties of DMLS fabricated AlSi10Mg[J]. The Journal of the Minerals, Metals & Materials Society, 2019, 132(71):3241-3252.

[17] [17] WANG Y, BERGSTROM J, BURMAN C, et al. Characterization of an iron-based laser sintered material[J]. Journal of Materials Processing Technology, 2006, 172(l):77-87.

[18] [18] TRAINI T, MANGANO C, SAMMONS R L, et al. Direct laser metal sintering as a new approach to fabrication of an isoelectric functionally graded material for manufacture of Porous titanium dental implants[J]. Dental Materials, 2008, 24(11):1525-1533.

[19] [19] FRANCHITTI S, BORRELLI R. Wettability behavior of Ti6Al4V electron beam melted surfaces[J]. Key Engineering Materials, 2019, 45(12):116-121.

[20] [20] KEATON F, RYAN S, RODNEY P D. Assessing the accuracy of casting and additive manufacturing techniques for fabrication of a complete palatal coverage metal framework[J]. Journal of Prosthodontics: Official Journal of the American College of Prosthodontists, 2019, 36(15):811-817.

[21] [21] XIE J W, FOX P, ONEILL W, et al. Effect of direct laser re-melting processing parameters and scanning strategies on the densification of tool steels[J]. Journal of Materials Processing Technology, 2005, 170(18):516-523.

[22] [22] MUMTAZ K A, ERASENTHIRAN P, HOPKINSON N. High density selective laser melting of Waspaloy(R)[J]. Journal of Materials Processing Technology, 2008, 195(l/3):77-87.

[23] [23] MAHARUBIN S, HU Y B, SOORIYAARACHCHI D, et al. Laser engineered net shaping of antimicrobial and biocompatible titanium-silver alloys[J]. Materials Science & Engineering , 2019, 46(4):980-983.

[24] [24] SERCOMBE T, JONES N, DAY R, et al. Heat treatment of Ti-6Al-7Nb components produced by selective laser melting[J].Rapid Prototyping Journal, 2008,14(5):300-304.

[25] [25] MURR L E, QUINONES S A, GALONSKA S. Microstructure and mechanical behavior of Ti-6AI-4V produced by rapid-layer manufacturing for biomedical applications[J]. Journal of The Mechanical Behavior of Biomedical Materials, 2008, 18(6):192-203.

[26] [26] THJJS L, VERHAEGHE F, CRAEGHS T, et al. A study of the microstructural evolution during selective laser melting of Ti-6AI-4V[J]. Acta Material, 2010, 58(8):3303-3312.

[27] [27] TANG Y, LOU H T, WONG Y S, et al. Direct laser sintering of a copper-based alloy for creating three-dimensional metal parts[J]. Journal of Materials Processing Technology, 2003, 140(62):368-372.

[28] [28] LI R D. Research on the key basic issues in selective laser melting of metallic power[D]. Wuhan:Huazhong University of Science and Technology, 2010: 17-74(in Chinese).

[29] [29] CHEN Sh, WU J M, SHI Y Sh. General introduction of 3-D printing materials and their applications[J]. Physics, 2018, 47(11):715-724(in Chinese).

[30] [30] WANG J F, YUAN J T, WANG Zh H, et al.Deformation and residual stress of TC4 titanium alloy thin-wall parts by selective laser melting[J].Laser Technology, 2019,43(3):411-415(in Chinese).

[31] [31] ZHANG C Y, CHEN X S. The development situation of material based on dental implant[J]. Advanced Materials Research, 2013, 12(26): 541-548.

[32] [32] LIU P L, SUN W L, WANG K D, et al.Effect of scanning speed on the properties of laser cladding nickel-based alloy coating[J].Laser Technology, 2018, 42(6):845-848(in Chinese).

[33] [33] GU D D, SHEN Y F. Balling phenomena during direct laser sintering of multi-component Cu-based metal powder[J]. Journal of Alloys and Compounds, 2007, 432(1/2):163-166.

[34] [34] NIKOLAK K T, SERGEI E M, IGOR A Y, et al. Balling processes during selective laser treatment of powders[J]. Rapid Prototyping Journal, 2004, 312(10):78-87.

[35] [35] SUN Z, TAN X, SHU B T, et al. Selective laser melting of stainless steel 316L with low porosity and high build rates[J]. Materials & Design, 2016, 104(35):197-204.

[36] [36] ZHANG K, LIU T T, ZHANG Ch D, et al. Study on deformation behavior in selective laser melting based on the analysis of the melt pool data[J]. Chinese Journal of Lasers, 2015, 42(9):0903007(in Chinese).

[37] [37] AN Ch, ZHANG Y M, ZHANG J S, et al. Experimental study on density and pore defects of cobalt-chromium alloy fabricated by selective laser melting[J]. Applied Laser, 2018, 38(5):730-737(in Chinese) .

[38] [38] LIANG X K, DONG P. Microstructure and mechanical properties of selective laser melting Ti-6Al-4V alloy[J].Applied Laser, 2014, 34(2):25-28 (in Chinese) .

[39] [39] YAO H S, SHI Y Sh, ZHANG W X, et al. Numerical simulation of the temperature field in selective laser melting[J]. Applied Laser, 2007, 27(6):456-460 (in Chinese).

[40] [40] YANG Y Q, LUO Z Y, SU X B, et al. Study on process and effective factors of stainless steel thin-wall parts manufactured by selective laser melting[J]. Chinese Journal of Lasers, 2011, 38(1):0103001(in Chinese) .

[41] [41] LIU Y, ZHANG J, PANG Z, et al.Investigation into the influence of laser energy input on selective laser melted thin-walled parts by response surface method[J].Optics & Lasers in Engineering, 2018, 103:34-45.

[42] [42] LI Zh H, XU R J, ZHENG Zh G, et al.The influence of scan length on fabricating thin-walled components in selective laser melting[J].International Journal of Machine Tools & Manufacture, 2017, 126:1-12.