[1] Komisarov V, Talianker M, Cina B. Effect of retrogression and reaging on the precipitates in an 8090 Al-Li alloy[J]. Materials Science and Engineering A, 242, 39-49(1998). http://www.sciencedirect.com/science/article/pii/S0921509397005029

[2] Li J F, Zheng Z Q, Chen Y L et al[J]. Al-Li alloys and their application in aerospace industry Aerospace Materials & Technology, 2012, 13-19.

[3] Nayan N. Murty S V S N, Jha A K, et al. Processing and characterization of Al-Cu-Li alloy AA22195 undergoing scale up production through the vacuum induction melting technique[J]. Materials Science and Engineering A, 576, 21-28(2013). http://www.sciencedirect.com/science/article/pii/S0921509313003249

[4] Olakanmi E O, Cochrane R F, Dalgarno K W. A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties[J]. Progress in Materials Science, 74, 401-477(2015). http://www.sciencedirect.com/science/article/pii/S0079642515000389

[5] Wang H M. Materials' fundamental issues of laser additive manufacturing for high-performance large metallic components[J]. Acta Aeronautica et Astronautica Sinica, 35, 2690-2698(2014).

[6] Liu X X, Cheng X, Wang H M et al. Influence of processing conditions on formation of stray grains in DD5 single-crystal superalloys by laser melting multi-traced deposition[J]. Chinese Journal of Lasers, 44, 0602009(2017).

[7] Zhu Y Y, Liu D, Tian X J et al. Characterization of microstructure and mechanical properties of laser melting deposited Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy[J]. Materials & Design, 56, 445-453(2014). http://www.sciencedirect.com/science/article/pii/S0261306913010935

[8] Ran X Z, Liu D, Li A et al. Microstructure characterization and mechanical behavior of laser additive manufactured ultrahigh-strength AerMet100 steel[J]. Materials Science and Engineering A, 663, 69-77(2016). http://www.sciencedirect.com/science/article/pii/S0921509316302544

[9] Yan C Z, Hao L, Hussein A et al. Microstructure and mechanical properties of aluminium alloy cellular lattice structures manufactured by direct metal laser sintering[J]. Materials Science and Engineering A, 628, 238-246(2015). http://www.sciencedirect.com/science/article/pii/S0921509315000908

[10] Wang X J, Zhang L C, Fang M H et al. The effect of atmosphere on the structure and properties of a selective laser melted Al-12Si alloy[J]. Materials Science and Engineering A, 597, 370-375(2014). http://www.sciencedirect.com/science/article/pii/S092150931400032X

[11] Domack M S, Taminger K M B. produced by electron beam freeform fabrication[J]. Materials Science Forum, 2006, 519/520/521, 1291-1296(2219).

[12] Li J, Cheng X, Liu D et al. Phase evolution of a heat-treatable aluminum alloy during laser additive manufacturing[J]. Materials Letters, 214, 56-59(2018). http://www.sciencedirect.com/science/article/pii/S0167577X17317366

[13] Li X P, Wang X J, Saunders M et al. A selective laser melting and solution heat treatment refined Al-12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility[J]. Acta Materialia, 95, 74-82(2015).

[14] Li J, Wang H M, Tang H B. Effect of heat treatment on microstructure and mechanical properties of laser melting deposited Ni-base superalloy Rene'41[J]. Materials Science and Engineering A, 550, 97-102(2012). http://www.sciencedirect.com/science/article/pii/S0921509312005588

[15] Chen Y C, Zhang S Q, Tian X J et al. Microstructure and microhardness of 4045 aluminum alloy fabricated by laser melting deposition[J]. Chinese Journal of Lasers, 42, 0303008(2015).

[16] Gu J L, Ding J L, Williams S W et al. The strengthening effect of inter-layer cold working and post-deposition heat treatment on the additively manufactured Al-6.3Cu alloy[J]. Materials Science and Engineering A, 651, 18-26(2016). http://www.sciencedirect.com/science/article/pii/S092150931530561X

[17] Zhang H, Nie X J, Zhu H H et al. Study on high strength Al-Cu-Mg alloy fabricated by selective laser melting[J]. Chinese Journal of Lasers, 43, 0503007(2016).

[18] Yu X X, Yin D F, Yu Z M et al. Effects of cerium addition on solidification behaviour and intermetallic structure of novel Al-Cu-Li alloys[J]. Rare Metal Materials and Engineering, 45, 1423-1429(2016). http://www.researchgate.net/publication/306208072_Effects_of_Cerium_Addition_on_Solidification_Behaviour_and_Intermetallic_Structure_of_Novel_Al-Cu-Li_Alloys

[19] Li X C[M]. Structure and metallographic map of aluminum alloy, 387(2010).

[20] Chen D L, Chaturvedi M C. Effects of welding and weld heat-affected zone simulation on the microstructure and mechanical behavior of a 2195 aluminum-lithium alloy[J]. Metallurgical and Materials Transactions A, 32, 2729-2741(2001). http://link.springer.com/article/10.1007/s11661-001-1025-6

[21] Fu B L, Qin G L, Meng X M et al. Microstructure and mechanical properties of newly developed aluminum-lithium alloy 2A97 welded by fiber laser[J]. Materials Science and Engineering A, 617, 1-11(2014). http://www.sciencedirect.com/science/article/pii/S0921509314010387

[22] Zhang X Y, Huang T, Yang W X et al. Microstructure and mechanical properties of laser beam-welded AA2060 Al-Li alloy[J]. Journal of Materials Processing Technology, 237, 301-308(2016). http://www.sciencedirect.com/science/article/pii/S0924013616302011

[23] Gupta R K, Nayan N, Nagasireesha G et al. Development and characterization of Al-Li alloys[J]. Materials Science and Engineering A, 420, 228-234(2006). http://www.sciencedirect.com/science/article/pii/S0921509306001237

[24] Liu Q, Zhu R H, Li J F et al. Microstructural evolution of Mg, Ag and Zn micro-alloyed Al-Cu-Li alloy during homogenization[J]. Transactions of Nonferrous Metals Society of China, 26, 607-619(2016). http://www.sciencedirect.com/science/article/pii/S1003632616641493

[25] Yoshimura R, Konno T J, Abe E et al. Transmission electron microscopy study of the early stage of precipitates in aged Al-Li-Cu alloys[J]. Acta Materialia, 51, 2891-2903(2003). http://www.sciencedirect.com/science/article/pii/S1359645403001046

[26] Ringer S P, Muddle B C, Polmear I J. Effects of cold work on precipitation in Al-Cu-Mg-(Ag) and Al-Cu-Li-(Mg-Ag) alloys[J]. Metallurgical and Materials Transactions A, 26, 1659-1671(1995). http://link.springer.com/article/10.1007/BF02670753

[27] Wu X W, Gao G G, He W Y et al[J]. Effect of microstructure for Zr addition in Al-Cu-Li-Mg alloys Journal of Materials Engineering, 1992, 208-211.

[28] Jo H H[J]. Hirano K I. Precipitation processes in Al-Cu-Li alloy studied by DSC. Materials Science Forum, 13/14, 377-382(1987).

[29] Li H Y, Sun Y, Wang X F et al[J]. Effect of hot treatment on mechanical properties and microstructure of a new type Al-Cu-Li alloy Journal of Materials Engineering, 2008, 41-45.

[30] Yan H. Study on the heat treatment process and microstructure properties of the 2A97 aluminum-lithium alloy[D]. Changsha: Hunan University, 1-65(2013).

[31] Li H Y, Tang Y, Zeng Z D et al. Effect of ageing time on strength and microstructures of an Al-Cu-Li-Zn-Mg-Mn-Zr alloy[J]. Materials Science and Engineering A, 498, 314-320(2008).

[32] Barr S C, Rylands L M, Jones H et al. Formation and characteristics of coarsening resistant cubic sigma phase in AI-4.2Cu-1.6Mg-0.2Si[J]. Materials Science and Technology, 13, 655-659(1997). http://www.tandfonline.com/doi/abs/10.1179/mst.1997.13.8.655