[1] [1] ZHANG Q L, ZHOU M Zh, CHEN Z J, et al. Technique of non-penetration laser lap welding on galvanized steel and AISI 304 stainless steel［J］.Chinese Journal of Lasers, 2011, 38(6): 603012 (in Chinese).

[2] [2] LAZAR A M, YESPICA W P, MARCELIN S, et al. Corrosion protection of 304L stainless steel by chemical vapor deposited alumina coatings［J］. Corrosion Science, 2014, 81(2):125-131.

[3] [3] XU Z K. Research on automatic mechanical polishing technology and the process optimization for stainless steel thin-wall material workpieces［D］. Wuhan: Huazhong University of Science and Technology, 2013: 27-90(in Chinese).

[4] [4] MA D, XU L G, LI Sh B, et al. Progress in the research of chemical polishing liquid for stainless steel［J］. Material Protection, 2014, 47(9):54-55 (in Chinese).

[5] [5] CHEN H. Electrochemical polishing behavior of stainless steel in H2SO4-H3PO4 mixed acid［J］. Plating & Finishing, 2014, 36(5): 37-40(in Chinese).

[6] [6] WANG Y, MAN R L, LIANG Y H, et al. Progress in research on surface polishing technologies for stainless steel ［J］. Electroplating & Pollution Control, 2012, 32(2):1-4(in Chinese).

[7] [7] FANG J L, HAN K P. Quantitative study on chemical polishing of stainless steel［J］.Electroplating & Pollution Control,1995, 15(6): 15-17(in Chinese).

[8] [8] ZHOU M, WEI X, XIE X Zh, et al. Study on polishing process of Al2O3 ceramic with 355nm ultraviolet laser［J］. Laser Technology, 2014, 38(4): 556-560(in Chinese).

[9] [9] DAI W, ZHENG Zh Zh, LI J J, et al. Research Progress of laser polishing on the metal surface［J］.Laser & Optoelectronics Progress, 2015, 52(11): 110001 (in Chinese).

[10] [10] HUA X G, WEI X, ZHOU M, et al. Experimental study on mechanism of 355nm ultraviolet laser polishing of Al2O3 ceramics［J］. Chinese Journal of Lasers, 2014, 41(12): 1203002 (in Chinese).

[11] [11] BORDATCHEV E V, HAFIZ A M K, TUTUNEA-FATAN O R. Performance of laser polishing in finishing of metallic surfaces［J］. International Journal of Advanced Manufacturing Technology, 2014, 73(1/4):35-52.

[12] [12] NA R, CHEN T. Research of YAG laser of 38CrMoAl surface［J］. Laser & Optoelectronics Progress, 2016, 53(1): 11402 (in Chinese).

[13] [13] PERRY T L, WERSCHMOELLER D, LI X C, et al. The effect of laser pulse duration and feed rate on pulsed laser polishing of micro-fabricated nickel samples［J］. Journal of Manufacturing Science and Engineering, 2009, 131(3): 031002.

[14] [14] ZHU B, QI L T, WANG Y. The experimental study of water-assisted laser machining［J］. Modern Manufacturing Engineering, 2003, 26(12):73-74(in Chinese).

[15] [15] CHEN T, WANG C H, WU J, et al.The current research situation of laser polishing technology［J］. New Technology & New Process, 2009, 31(9):70-73(in Chinese).

[16] [16] DU Y L, MA N, LI H B. Surface treatment of austenitic stainless steel equipment in nuclear power plant-pickling and passivation［J］. Science &Technology Information, 2011, 28(11):44-47(in Chinese).

[17] [17] YAO Q F, GUO J Ch, GUAN C Sh. A study on stainless steel chemcial polishing at room temperature［J］. Plating & Finishing, 2000, 28(2):29-32(in Chinese).

[18] [18] YAO Y W, QIU L, ZHAO Ch M, et al. Chemical polishing technology of stainless steel［J］. Plating & Finishing, 2010, 32(9):5-7(in Chinese).

[19] [19] YIN S H, GUO Zh N, CHEN T N, et al. The explosive boiling experiment study on underwater laser processing［J］. Electromachining & Mould, 2016, 51(3): 36-41(in Chinese).

[20] [20] LI W, YANG K Ch, XIA M, et al. Distribution characteristics of scattered light intensity on coated air bubble in water［J］. Acta Optica Sinica, 2008, 28(4):799-803(in Chinese).