[1] Wang J, Wang C M, Meng X X et al. Study on the periodic oscillation of plasma/vapour induced during high power fibre laser penetration welding[J]. Optics & Laser Technology, 44, 67-70(2012).

[2] Beyer E, Bakowsky L, Loosen P et al. Development and optical absorption properties of a laser induced plasma during CO2 laser processing[J]. Proceedings of SPIE, 0455, 75-80(1984).

[3] Kawahito Y, Matsumoto N, Mizutani M et al. Characterisation of plasma induced during high power fibre laser welding of stainless steel[J]. Science and Technology of Welding and Joining, 13, 744-748(2008).

[4] Tenner F, Brock C, Klämpfl F et al. Analysis of the correlation between plasma plume and keyhole behavior in laser metal welding for the modeling of the keyhole geometry[J]. Optics and Lasers in Engineering, 64, 32-41(2015).

[5] Xiao X F, Song L J, Xiao W J et al. Space-dependent characterization of laser-induced plasma plume during fiber laser welding[J]. Journal of Physics D: Applied Physics, 49, 485203(2016).

[6] Zhang Y, Li F Z, Liang Z C et al. Correlation analysis of penetration based on keyhole and plasma plume in laser welding[J]. Journal of Materials Processing Technology, 256, 1-12(2018).

[7] Arita T, Sato Y, Kurita Y et al. In situ observation of dynamics of keyhole and molten pool in laser welding for development of spatter suppression[J]. Journal of Laser Applications, 34, 032017(2022).

[8] Li Y K, Zou J L, Niu J Q et al. Experimental study on plasma characteristics in CO2 laser welding of stainless steel[J]. Applied Laser, 32, 180-183(2012).

[9] Huang Y, Shen C, Ji X R et al. Correlation between gas-dynamic behaviour of a vapour plume and oscillation of keyhole size during laser welding of 5083 Al-alloy[J]. Journal of Materials Processing Technology, 283, 116721(2020).

[10] Pang S Y, Chen X, Shao X Y et al. Dynamics of vapor plume in transient keyhole during laser welding of stainless steel: local evaporation, plume swing and gas entrapment into porosity[J]. Optics and Lasers in Engineering, 82, 28-40(2016).

[11] Zhao S B, Yang L J, Liu T et al. Analysis of plasma oscillations by electrical detection in Nd∶YAG laser welding[J]. Journal of Materials Processing Technology, 249, 479-489(2017).

[12] Bi C, Yang L J, Xu W H et al. An electrical detection of the fluctuating plasma of laser welding with a passive probe[J]. Journal of Physics D: Applied Physics, 45, 385202(2012).

[13] Zhao S B, Yang L J, Huang Y M et al. A study on welding mode transition by electrical detection of laser-induced plasma at varying energy levels[J]. The International Journal of Advanced Manufacturing Technology, 104, 893-906(2019).

[14] Huang Y M, Xu S, Yang L J et al. Defect detection during laser welding using electrical signals and high-speed photography[J]. Journal of Materials Processing Technology, 271, 394-403(2019).

[15] Boyer R R, Gerhard W, Collings E W[M]. Materials properties handbook: titanium alloys(1994).

[16] Ying Y Y. Study on laser welding deformation and induced plasma behavior of TC4 titanium alloy[D], 49-53(2016).

[17] Kroos J, Gratzke U, Simon G. Towards a self-consistent model of the keyhole in penetration laser beam welding[J]. Journal of Physics D: Applied Physics, 26, 474-480(1993).

[18] Matsunawa A, Kim J D, Seto N et al. Dynamics of keyhole and molten pool in laser welding[J]. Journal of Laser Applications, 10, 247-254(1998).

[19] Kroos J. Stabilität und dynamik der dampfkapillare beim laserstrahlschweißen von metallen[D], 62-66(1993).