[1] [1] Zhang Junwei, Zhou Yi, Zhou Hai et al.. Effect of transient change of temperature on large-aperture optical element ［J］. Chinese J. Lasers, 2009, 36(2):333～337

[2] [2] Feng Shulong, Zhang Xin, Weng Zhicheng et al.. Study on deformation of surface figure of large aperture mirror in temperature field ［J］. Optical Technique, 2005, 31(1):41～43

[3] [3] Xu Rongwei, Liu Liren, Liu Hongzhan et al.. Support schemes and thermal deformation analysis of large aperture interferometer mirrors ［J］. Acta Optica Sinica, 2005, 25(6):809～815

[4] [4] Zhou Yi, Yang Shujuan, Zhang Junwei et al.. Thermal transfiguration analysis for the large aperture optical element of switchyard in ICF driver target area ［J］. Chinese J. Lasers, 2010, 37(1):125～130

[5] [5] M. Olivieri, S. Pieri, A. Romoli. Analysis of defocusing thermal effects in optical systems ［C］. SPIE, 1996, 2774:283～292

[6] [6] Alson E. Hatheway. Unified thermal/elastic optical analysis of a lithographic lens ［C］. SPIE, 1996, 3130:100～108

[7] [7] Chen Hua, Shi Zhenguang, Sui Yongxin et al.. Thermal deformation analysis of optical surfaces caused by environmental temperature during interferometric testing ［J］. Acta Optica Sinica, 2011, 31(1):0112007

[8] [8] Mete Bayar. Lens barrel optomechanical design principles ［J］. Opt. Engng., 1981, 20(2):181～186

[9] [9] Paul R. Yoder, Jr.. Opto-Mechanical Systems Design ［M］. Third Edition. Bellingham: SPIE Press, 2006. 767～783

[10] [10] Gu Jiyou. Adhesion Theory and Basis ［M］. Beijing: Science Press, 2003. 180～182

[11] [11] K. Rhodes. Adhesives deliver low shrink, low stress bonds and fast UV cure ［C］. SPIE, 2001, 4253:1605～1612

[12] [12] James J. Herbert. Techniques for deriving optimal bondlines for athermal bonded mounts ［C］. SPIE, 2006, 6288:62880J

[13] [13] Kirk A. Miller. Non-athermal potting of optics ［C］. SPIE, 1999, 3786:506～514

[14] [14] Christopher L. Monti. Athermal bonded mounts: incorporating aspect ratio into a closed-form solution ［C］. SPIE, 2007, 6665:666503

[15] [15] Li Shixue. Manufacture and Application of Adhesives ［M］. Tianjin: Tianjin Science and Technology Press,1984. 231～235

[16] [16] Lu Hanmin. Technique for lens fixing by adhesion ［J］. Optical Technique, 1991, 13(4):29～34

[17] [17] Michels Gregory, Keith Doyle. Finite element modeling of nearly incompressible bonds ［C］. SPIE, 2002, 4771:287～299

[18] [18] Han Xu, Wu Qingwen, Dong Deyi et al.. Application of RTV adhesive modeling to structure analysis of reflective mirror ［J］. Optics and Precision Engineering, 2010, 18(1):118～125

[19] [19] Guan Yingjun. Finite element analysis of the focusing mirror fastened by adhesive ［J］. Opto-Electronic Engineering, 2010, 37(10):1～5

[20] [20] Ryaboy Vyacheslav M.. Analysis of thermal stress and deformation in elastically bonded optics ［C］. SPIE, 2007, 6665:66650K