International Journal of Extreme Manufacturing, Volume. 7, Issue 2, 25504(2025)

3D-programmable streamline guided orientation in composite materials for targeted heat dissipation

Zhang Xinfeng, Yang Xuan, Fan Yiwen, Hu Run, Xie Bin, and Luo Xiaobing
References(39)

[1] [1] Mecklenburg M, Mizushima D, Ohtake N, Bauhofer W, Fiedler B and Schulte K 2015 On the manufacturing and electrical and mechanical properties of ultra-high wt.% fraction aligned MWCNT and randomly oriented CNT epoxy compositesCarbon91275–90

[2] [2] Anand S, Vu M C, Mani D, Kim J-B, Jeong T-H, Islam A and Kim S-R 2023 Dual 3D networks of graphene derivatives based polydimethylsiloxane composites for electrical insulating electronic packaging materials with outstanding electromagnetic interference shielding and thermal dissipation performancesChem. Eng. J.462142017

[3] [3] Huang T Q, Wang T, Jin J, Chen M and Wu L M 2023 Design of silicon rubber/BN film with high through-plane thermal conductivity and ultra-low contact resistanceChem. Eng. J.469143874

[4] [4] Li C, Zeng X-L, Tan L-Y, Yao Y-M, Zhu D-L, Sun R, Xu J-B and Wong C-P 2019 Three-dimensional interconnected graphene microsphere as fillers for enhancing thermal conductivity of polymerChem. Eng. J.36879–87

[5] [5] Coleman J N, Khan U, Blau W J and Gun'ko Y K 2006 Small but strong: a review of the mechanical properties of carbon nanotube–polymer compositesCarbon441624–52

[6] [6] Zhang X-D, Yang G and Cao B-Y 2022 Bonding-enhanced interfacial thermal transport: mechanisms, materials, and applicationsAdv. Mater. Interfaces92200078

[7] [7] Peng L Q, Yu H T, Chen C, He Q X, Zhang H, Zhao F L, Qin M M, Feng F Y and Feng W 2023 Tailoring dense, orientation-tunable, and interleavedly structured carbon-based heat dissipation platesAdv. Sci.102205962

[8] [8] Mao D S, Chen J H, Ren L L, Zhang K, Yuen M M F, Zeng X L, Sun R, Xu J-B and Wong C-P 2019 Spherical core-shell Al@Al2O3filled epoxy resin composites as high-performance thermal interface materialsComposiesA123260–9

[9] [9] Kim Y-K, Chung J-Y, Lee J-G, Baek Y-K and Shin P-W 2017 Synergistic effect of spherical Al2O3 particles and BN nanoplates on the thermal transport properties of polymer compositesComposiesA98184–91

[10] [10] Oya T, Nomura T, Tsubota M, Okinaka N and Akiyama T 2013 Thermal conductivity enhancement of erythritol as PCM by using graphite and nickel particlesAppl. Therm. Eng.61825–8

[11] [11] Xie B, Zhao W X, Luo X B and Hu R 2023 Alignment engineering in thermal materialsMater. Sci. Eng.R154100738

[12] [12] Lei C X, Xie Z L, Wu K and Fu Q 2021 Controlled vertically aligned structures in polymer composites: natural inspiration, structural processing, and functional applicationAdv. Mater.332103495

[13] [13] Karthik M, Faik A, Blanco-Rodrguez P, Rodrguez-Aseguinolaza J and D'Aguanno B 2015 Preparation of erythritol-graphite foam phase change composite with enhanced thermal conductivity for thermal energy storage applicationsCarbon94266–76

[14] [14] Zhang X-D, Zhang Z-T, Wang H-Z and Cao B-Y 2023 Thermal interface materials with high thermal conductivity and low young's modulus using a solid-liquid metal codoping strategyACS Appl. Mater. Interfaces153534–42

[15] [15] Yu Z F, Wei S and Guo J D 2019 Fabrication of aligned carbon-fiber/polymer TIMs using electrostatic flocking methodJ. Mater. Sci., Mater. Electron.3010233–43

[16] [16] Uetani K, Ata S, Tomonoh S, Yamada T, Yumura M and Hata K 2014 Elastomeric thermal interface materials with high through-plane thermal conductivity from carbon fiber fillers vertically aligned by electrostatic flockingAdv. Mater.265857–62

[17] [17] Kargar F, Barani Z, Salgado R, Debnath B, Lewis J S, Aytan E, Lake R K and Balandin A A 2018 Thermal percolation threshold and thermal properties of composites with high loading of graphene and boron nitride fillersACS Appl. Mater. Interfaces1037555–65

[18] [18] Nikzad M, Masood S H and Sbarski I 2011 Thermo-mechanical properties of a highly filled polymeric composites for fused deposition modelingMater. Des.323448–56

[19] [19] Yuan C, Huang M Y, Cheng Y H and Luo X B 2017 Bonding-induced thermal transport enhancement across a hard/soft material interface using molecular monolayersPhys. Chem. Chem. Phys.197352–8

[20] [20] Majumdar S, Sierra-Suarez J A, Schiffres S N, Ong W-L, Higgs C F III McGaughey A J H and Malen J A 2015 Vibrational mismatch of metal leads controls thermal conductance of self-assembled monolayer junctionsNano Lett.152985–91

[21] [21] Chen J, Huang X Y, Sun B and Jiang P K 2019 Highly thermally conductive yet electrically insulating polymer/boron nitride nanosheets nanocomposite films for improved thermal management capabilityACS Nano13337–45

[22] [22] Zhang X, Jiang J Y, Shen Z H, Dan Z K, Li M, Lin Y H, Nan C-W, Chen L Q and Shen Y 2018 Polymer nanocomposites with ultrahigh energy density and high discharge efficiency by modulating their nanostructures in three dimensionsAdv. Mater.301707269

[23] [23] Yuan C, Duan B, Li L, Xie B, Huang M Y and Luo X B 2015 Thermal conductivity of polymer-based composites with magnetic aligned hexagonal boron nitride plateletsACS Appl. Mater. Interfaces713000–6

[24] [24] Zhang X F, Zhou S L, Xie B, Lan W, Fan Y W, Hu R and Luo X B 2021 Thermal interface materials with sufficiently vertically aligned and interconnected nickel-coated carbon fibers under high filling loads made via preset-magnetic-field methodCompos. Sci. Technol.213108922

[25] [25] Zhang X, Wu K, Liu Y H, Yu B W, Zhang Q, Chen F and Fu Q 2019 Preparation of highly thermally conductive but electrically insulating composites by constructing a segregated double network in polymer compositesCompos. Sci. Technol.175135–42

[26] [26] Xie K, Liu Y H, Tian Y X, Wu X N, Wu L Y, Mo Y L, Sui G, Du R N, Fu Q and Chen F 2021 Improving the flexibility of graphene nanosheets films by using aramid nanofiber frameworkComposiesA142106265

[27] [27] Zhang X F, Xie B, Zhou S L, Yang X, Fan Y W, Hu R and Luo X B 2022 Radially oriented functional thermal materials prepared by flow field-driven self-assembly strategyNano Energy104107986

[28] [28] Zhang Jet al2017 A facile method to prepare flexible boron nitride/poly (vinyl alcohol) composites with enhanced thermal conductivityCompos. Sci. Technol.14941–47

[29] [29] Zeng X L, Yao Y M, Gong Z Y, Wang F F, Sun R, Xu J B and Wong C-P 2015 Ice-templated assembly strategy to construct 3D boron nitride nanosheet networks in polymer composites for thermal conductivity improvementSmall116205–13

[30] [30] Wang C H, Chen X, Wang B, Huang M, Wang B, Jiang Y and Ruoff R S 2018 Freeze-casting produces a graphene oxide aerogel with a radial and centrosymmetric structureACS Nano125816–25

[31] [31] Liu D Y, Lei C X, Wu K and Fu Q 2020 A multidirectionally thermoconductive phase change material enables high and durable electricityviareal-environment solar-thermal-electric conversionACS Nano1415738–47

[32] [32] Xie B, Wang Y J, Liu H C, Ma J L, Zhou S L, Yu X J, Lan W, Wang K, Hu R and Luo X B 2022 Targeting cooling for quantum dots by 57.3 ℃ with air-bubbles-assembled three-dimensional hexagonal boron nitride heat dissipation networksChem. Eng. J.427130958

[33] [33] Erb R M, Libanori R, Rothfuchs N and Studart A R 2012 Composites reinforced in three dimensions by using low magnetic fieldsScience335199–204

[34] [34] Moore A L and Shi L 2014 Emerging challenges and materials for thermal management of electronicsMater. Today17163–74

[35] [35] Li J C, Li F Z, Zhao X Y, Zhang W F, Li S J, Lu Y L and Zhang L Q 2020 Jelly-inspired construction of the three-dimensional interconnected BN network for lightweight, thermally conductive, and electrically insulating rubber compositesACS Appl. Electron. Mater.21661–9

[36] [36] Kokkinis D, Schaffner M and Studart A R 2015 Multimaterial magnetically assisted 3D printing of composite materialsNat. Commun.68643

[37] [37] Compton B G and Lewis J A 2014 3D-printing of lightweight cellular compositesAdv. Mater.265930–5

[38] [38] Cho D, Choi Y, Park J K, Lee J, Yoon B I and Lim Y S 2004 Thermal conductivity and thermal expansion behavior of pseudo-unidirectional and 2-directional quasi-carbon fiber/phenolic compositesFibers Polym.531–38

[39] [39] Lalet G, Kurita H, Heintz J-M, Lacombe G, Kawasaki A and Silvain J-F 2014 Thermal expansion coefficient and thermal fatigue of discontinuous carbon fiber-reinforced copper and aluminum matrix composites without interfacial chemical bondJ. Mater. Sci.49397–402

Tools

Get Citation

Copy Citation Text

Zhang Xinfeng, Yang Xuan, Fan Yiwen, Hu Run, Xie Bin, Luo Xiaobing. 3D-programmable streamline guided orientation in composite materials for targeted heat dissipation[J]. International Journal of Extreme Manufacturing, 2025, 7(2): 25504

Download Citation

EndNote(RIS)BibTexPlain Text
Save article for my favorites
Paper Information

Category:

Received: Feb. 5, 2024

Accepted: May. 29, 2025

Published Online: May. 29, 2025

The Author Email:

DOI:10.1088/2631-7990/ad92cb

Topics