[1] Ewing R C, Park S. The concept of geological disposal of highly radioactive nuclear waste[M]. Encyclopedia of Nuclear Energy, 588-602(2021).

[2] Hu G, Pfingsten W. Data-driven machine learning for disposal of high-level nuclear waste: a review[J]. Annals of Nuclear Energy, 180, 109452(2023).

[3] Wang Y, Wang J, Wang J X et al. Preparation of MgO-Nd2Zr2O7 composite ceramics used for inert matrix fuel by one-step sintering method[J]. Ceramics International, 48, 2-27216(2022).

[4] Nandi C, Danny K M, Bhattacharya S et al. Phase evolution in M1-xPuxO2 (0.0≤x≤0.6) (M=Zr,Th) as potential inert matrix fuel system under reducing and oxidizing conditions[J]. Journal of Nuclear Materials, 547, 152800(2021).

[5] Usuki T, Yoshida K, Yano T et al. Fabrication and characterization of silicon nitride-based inert matrix fuels sintered with magnesium silicates[J]. Progress in Nuclear Energy, 53, 1078-1081(2011).

[6] Calabrese R, Vettraino F, Tverberg T. Under irradiation issues of the CSZ-based inert matrix fuels from IFA-652 Halden experiment[J]. Progress in Nuclear Energy, 52, 352-358(2010).

[8] Ojovan M I, Burakov B E, Lee W E. Destruction of micro-crystal containing wasteforms by charge-induced crystal shape change on self-irradiation[J]. MRS Advances, 2, 621-626(2017).

[9] YE Feng, GU Yu, HAN Fei et al. Preparation of sodium alginate-based super absorbent polymer by radiation grafting and crosslinking[J]. Nuclear Techniques, 43, 120301(2020).

[10] LIU Xinyu, ZHANG Limin, NING Guangsheng et al. Research progress on SiC irradiation temperature monitors for reactors[J]. Nuclear Techniques, 46, 090001(2023).

[11] LIU Cuicui, LI Zhiming, HAN Jinhua et al. Proton irradiation damage in silicon carbide junction barrier Schottky diode[J]. Nuclear Techniques, 46, 020203(2023).

[12] Yu T, Wu X, Xie J S et al. A study on the burn-up characteristics of inert matrix fuels[J]. Progress in Nuclear Energy, 78, 341-345(2015).

[13] Thridandapani R R, Folz D C, Clark D E. Microwave sintering of simulated inert matrix fuel for generation IV nuclear reactors[J]. Ceramics International, 37, 561-565(2011).

[14] Benz R. Thorium-thorium dioxide phase equilibria[J]. Journal of Nuclear Materials, 29, 43-49(1969).

[15] Ronchi C, Hiernaut J P. Experimental measurement of pre-melting and melting of thorium dioxide[J]. Journal of Alloys and Compounds, 240, 179-185(1996).

[16] Hashem E, Seibert A, Vigier J F et al. Solid-liquid equilibria in the ThO2-ZrO2 system: an experimental study[J]. Journal of Nuclear Materials, 521, 99-108(2019).

[17] Pouchon M A, Ledergerber G, Ingold F et al. Sphere-pac and VIPAC fuel[M]. Comprehensive Nuclear Materials, 275-312(2012).

[18] Pillon S, Grandjean S, Drain F et al. Impact of the curium management on the fabrication of MA-bearing targets at an industrial scale in the frame of a mixed PWR and FR P&T scenario[C], 537-547(2002).

[19] Haas P A, Haws Jr C C, Kitts F G et al. Engineering development of sol-gel process at Oak Ridge National Laboratory[R]. Oak Ridge National Laboratory Report, ORNL/TM-1978(1968).

[20] Ringel H D, Zimmer E. The external gelation of thorium process for preparation of ThO2 and (Th, U)O2 fuel kernels[J]. Nuclear Technology, 45, 287-298(1979).

[21] CHEN Xing, WU Zhonghua, CAI Quan et al. The effect of Ce-doping on microstructure of TiO2 nanoparticles[J]. Nuclear Techniques, 27, 890-894(2004).

[22] YIN Jilei, LI Yufeng, KANG Cheng et al. ICP-MS analysis for TiO2 distribution in mice injected with 3 nm TiO2 particles[J]. Nuclear Techniques, 32, 313-316(2009).

[23] SU Aiguo, ZHENG Yufang, WU Yichu et al. Positron lifetime studies for nanocrystalline SnO2 and SnO2/SiO2[J]. Nuclear Techniques, 21, 138-142(1998).

[24] Kanij J B W, Noothout A J, Votocek O. The KEMA U(VI) process for the production of UO2 microspheres, In: Sol-gel process for fuel fabrication[R]. International Atomic Energy Agency Report, Vienna: IAEA-161, 185-195(1990).

[25] Liang S S, Wang C L, Li Y J et al. Microfluidic fabrication of ZrO2 microspheres using improved external gelation aided by polyacrylamide networks[J]. Ceramics International, 47, 2-21581(2021).

[26] Vaidya V N, Mukherjee S K, Joshi J K et al. A study of chemical parameters of the internal gelation based Sol-gel process for uranium dioxide[J]. Journal of Nuclear Materials, 148, 324-331(1987).

[27] Nagarajan K, Vaidya V N[M]. Sol-Gel processing for conventional and alternative energy, advances in Sol-Gel derived materials and technologies, 341-373(2012).

[28] Haas P A. Formation of uniform liquid drops by application of vibration to laminar jets[J]. Industrial & Engineering Chemistry Research, 31, 959-967(1992).