[1] Tian Y, Sun Y C. A study on stress distribution in force ring sensors[J]. Sensor World, 14, 33-37(2008).

[2] Horiguchi T, Tateda M. BOTDA-nondestructive measurement of single-mode optical fiber attenuation characteristics using Brillouin interaction: theory[J]. Journal of Lightwave Technology, 7, 1170-1176(1989). http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=32378

[3] Zhou D W, Wang B Z, Ba D X et al. Fast distributed Brillouin optical fiber sensing for dynamic strain measurement[J]. Acta Optica Sinica, 38, 0328005(2018).

[4] Ding X D, Zhang Y M, Song Y M et al. Response characteristics of pure-quartz-core fiber Bragg grating under high temperature strain[J]. Chinese Journal of Lasers, 44, 1106003(2017).

[5] Zhang K Y, Zhao H, Zhang W C et al. Fiber Bragg grating electrostatic voltage sensor based on uniform strain beam[J]. Acta Optica Sinica, 35, 0306003(2015).

[6] Wang Y H, Liu J W, Zhang M Y et al. Test on axial force of double-walled mode pipe pile based on fiber Bragg grating[J]. Laser & Optoelectronics Progress, 55, 110605(2018).

[7] Zhu Y Q, Zhu H H, Sun Y J et al. Model experiment study of pipe pile driving into soil using FBG-BOTDA sensing monitoring technology[J]. Rock and Soil Mechanics, 35, 695-702(2014).

[8] Wang F, Huang H W, Zhang D M et al. Deformation sensing method of shield tunnel based on optical fiber sensing technology of BOTDA[J]. Chinese Journal of Rock Mechanics and Engineering, 32, 1901-1908(2013).

[9] Mohamad H, Soga K, Bennett P J et al. Monitoring twin tunnel interaction using distributed optical fiber strain measurements[J]. Journal of Geotechnical and Geoenvironmental Engineering, 138, 957-967(2012). http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=4747496

[10] Xu D S, Borana L, Yin J H. Measurement of small strain behavior of a local soil by fiber Bragg grating-based local displacement transducers[J]. Acta Geotechnica, 9, 935-943(2014). http://link.springer.com/10.1007/s11440-013-0267-y

[11] Cao D F, Shi B, Yan J F et al. Distributed method for measuring moisture content of soils based on C-DTS[J]. Chinese Journal of Geotechnical Engineering, 36, 910-915(2014).

[12] Feng W Q, Liu Z Y, Tam H Y et al. The pore water pressure sensor based on Sagnac interferometer with polarization-maintaining photonic crystal fiber for the geotechnical engineering[J]. Measurement, 90, 208-214(2016). http://www.sciencedirect.com/science/article/pii/S0263224116301348

[13] Lee J T, Tien K C. YEN T E H O, et al. A fiber optic sensored triaxial testing device[J]. ASTM Geotechnical Testing Journal, 34, 103-111(2011).

[14] Ding Y, Wang P, He N et al. New method to measure deformation of SMW piles based on BOTDA[J]. Chinese Journal of Geotechnical Engineering, 33, 719-724(2011).

[15] Zhu H H, Shi B, Yan J F et al. Physical model testing of slope stability based on distributed fiber-optic strain sensing technology[J]. Chinese Journal of Rock Mechanics and Engineering, 32, 821-828(2013).

[16] Timoshenko S. XCI. On the distribution of stresses in a circular ring compressed by two forces acting along a diameter[J]. The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science, 44, 1014-1019(1922). http://www.tandfonline.com/doi/abs/10.1080/14786441208562578

[17] Kogure T, Okuda Y. Monitoring the vertical distribution of rainfall-induced strain changes in a landslide measured by distributed fiber optic sensing with Rayleigh backscattering[J]. Geophysical Research Letters, 45, 4033-4040(2018).

[18] Li B, Zhang D, Chen X X et al. Testing method on performance of deformation coupling between distributed sensing fiber and soil[J]. Geological Journal of China Universities, 23, 633-639(2017).