Researching | Study on the influence of different working fluids on the hydraulic optimization design of high-temperature molten salt-canned motor pump

NUCLEAR TECHNIQUES, Volume. 46, Issue 6, 060602(2023)

Study on the influence of different working fluids on the hydraulic optimization design of high-temperature molten salt-canned motor pump

Tingjing DONG^1,2, Huiqing FAN^1,2, Yang ZOU^1,2、*, and Hongjie XU^1,2

Author Affiliations

¹Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800, China

²University of Chinese Academy of Sciences, Beijing 100049, China

show less

Abstract Get PDF(in Chinese)

Figures&Tables (16)

References (17)

Paper Information

References(17)

[1] GUAN Xingfan[M]. Modern pumps theory and design, 471-490(2011).

[2] Alawadhi K, Alzuwayer B, Ali Mohammad T et al. Design and optimization of a centrifugal pump for slurry transport using the response surface method[J]. Machines, 9, 60(2021).

[3] ZHANG Desheng, YANG Gang, ZHAO Xutao et al. Optimization design of vane diffuser and volute in vertical centrifugal pump based on back propagation neural network[J]. Transactions of the Chinese Society for Agricultural Machinery, 53, 130-139(2022).

[4] Yüksel O, Köseoğlu B. Modelling and performance prediction of a centrifugal cargo pump on a chemical tanker[J]. Journal of Marine Engineering & Technology, 19, 278-290(2020).

[5] GAO Jinpeng, YAO Chundong, LIU Qingyang et al. Simulated annealing algorithm-based optimization of crank phase arrangement of quintuple-cylinder reciprocating pump[J]. Journal of Drainage and Irrigation Machinery Engineering, 38, 878-884(2020).

[6] Lu Y M, Wang X F, Wang W et al. Application of the modified inverse design method in the optimization of the runner blade of a mixed-flow pump[J]. Chinese Journal of Mechanical Engineering, 31, 1-17(2018).

[7] Bashiri M, Derakhshan S, Shahrabi J. Design optimization of a centrifugal pump using particle swarm optimization algorithm[J]. International Journal of Fluid Machinery and Systems, 12, 322-331(2019).

[8] CHEN Junbai, LIU Yongzhi, CHEN Yong et al. Fault diagnosis of airborne fuel pump based on EMD and SVM[J]. Journal of Beijing University of Aeronautics and Astronautics, 47, 1687-1696(2021).

[9] JIN Yongxin, ZHANG Desheng, SHI Lei et al. Numerical investigation of flow structure and energy loss in impeller side chamber of molten salt pump[J]. Acta Energiae Solaris Sinica, 41, 326-334(2020).

[10] Gu J R, Gao B, Ni D et al. Investigation on the unsteady pressure pulsations and related vortical structures in a molten salt pump[J]. Energy Science & Engineering, 10, 2858-2876(2022).

[11] HE Xianghui, LIU Houlin, TAN Minggao et al. Influence of impeller back-blade type on molten-salt pump performance[J]. Journal of Drainage and Irrigation Machinery Engineering, 35, 289-295(2017).

[12] Kang C, Zhu Y, Li Q. Effects of hydraulic loads and structure on operational stability of the rotor of a molten-salt pump[J]. Engineering Failure Analysis, 117, 104821(2020).

[13] WANG Yefang, ZHANG Jinfeng, YUAN Shouqi et al. Influence of splitter blades in the structural dynamic characteristics on a high-temperature molten salt pump[J]. Fluid Machinery, 44, 38-44(2016).

[14] JIN Yongxin, ZHANG Desheng, SHI Lei et al. Effect of molten salt properties on internal flow and disk friction loss characterstics of molten salt pump[J]. Acta Energiae Solaris Sinica, 41, 176-184(2020).

[15] Shao C L, Zhou J F, Cheng W J. Experimental and numerical study of external performance and internal flow of a molten salt pump that transports fluids with different viscosities[J]. International Journal of Heat and Mass Transfer, 89, 627-640(2015).

[16] Cheng W J, Gu B Q, Shao C L. A numerical study on the steady flow in molten salt pump under various conditions for improved hydraulic performance[J]. International Journal of Numerical Methods for Heat & Fluid Flow, 27, 1870-1886(2017).

[17] Tian Y, Cheng R, Zhang X Y et al. PlatEMO: a MATLAB platform for evolutionary multi-objective optimization[J]. IEEE Computational Intelligence Magazine, 12, 73-87(2017).

Tools

Get Citation

Copy Citation Text

Tingjing DONG, Huiqing FAN, Yang ZOU, Hongjie XU. Study on the influence of different working fluids on the hydraulic optimization design of high-temperature molten salt-canned motor pump[J]. NUCLEAR TECHNIQUES, 2023, 46(6): 060602

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: Research Articles

Received: Jan. 17, 2023

Accepted: --

Published Online: Jul. 5, 2023

The Author Email:

DOI:10.11889/j.0253-3219.2023.hjs.46.060602

Topics

laser devices and laser physics

Lasers and Laser Optics

laser manufacturing

Instrumentation, Measurement and Metrology