[1] [1] YI X S, ZHANG M, AN X F, et al.. Development and application of advanced aeronautical polymer matrix composites［J］. Engineering Plastics Application, 2009, 37(10): 72-76. (in Chinese)

[2] [2] KORSON C, STRATTON D. An integrated automotive roof module concept: plastic-metal hybrid and polyurethane composite technology［C］. Proceedings of the 5th SPE Annual Automotive Composites Conference, Bayer Material Science LLC, 2005: 14-15.

[3] [3] LEI D Q, WANG ZH F, LI J, et al.. Experimental study of glass to metal seals for parabolic trough receivers［J］. Renewable Energy, 2012, 48: 85-91.

[4] [4] ZHAO W P, BARSUN S, RAMANI K, et al.. Development of PMMA-precoating metal prostheses via injection molding: residual stresses［J］. Journal of Biomedical Materials Research, 2001, 58(4): 456-462.

[5] [5] XU F, TIAN X Y, WANG H. Study on properties of SEBS epoxy adhesive and its preparation［J］. Plastics Science and Technology, 2015, 43(5): 56-60. (in Chinese)

[6] [6] DING W Y, HE X C, LIU J M, et al.. Performance of self-pierce riveting based on carbon fiber reinforced polymer-AA5052 aluminum alloy three-layer sheets［J］. Science Technology and Engineering, 2018, 18(25): 143-147. (in Chinese)

[7] [7] LI G, CHEN J H, YANISHEVSKY M, et al.. Static strength of a composite butt joint configuration with different attachments［J］. Composite Structures, 2012, 94(5): 1736-1744.

[8] [8] YUAN H, LIU P F, ZHAO Q L, et al.. Research on the influence factors of the bearing capacity for bonded-bolted hybrid joints［J］. Fiber Reinforced Plastics/Composites, 2013(3): 66-71. (in Chinese)

[9] [9] MA Y, JIANG K B, ZHAO Q L. Analysis of the impact of the fabrication technical process on the load transfer mechanism and carrying capacity of the bonded-bolted hybrid composite joints［J］. Journal of Mechanical Strength, 2011, 33(1): 99-105. (in Chinese)

[10] [10] YEH R Y, HSU R Q. Application of porous oxide layer in plastic/metal direct adhesion by injection molding［J］. Journal of Adhesion Science and Technology, 2015, 29(15): 1617-1627.

[11] [11] JIA ZH Y, ZHAO K, LIU W, et al.. Localized and precision removal of metal coating on engineering plastics using NC laser milling［J］. Opt. Precision Eng., 2016, 24(1): 94-101. (in Chinese)

[12] [12] HALDAR S, SAIN T, GHOSH S. A novel high symmetry interlocking micro-architecture design for polymer composites with improved mechanical properties［J］. International Journal of Solids and Structures, 2017, 124: 161-175.

[13] [13] MANDOLFINO C, LERTORA E, GAMBARO C. Effect of surface pretreatment on the performance of adhesive-bonded joints［J］. Key Engineering Materials, 2013, 554-557: 996-1006.

[14] [14] BAGHERI S, GUAGLIANO M. Review of shot peening processes to obtain nanocrystalline surfaces in metal alloys［J］. Surface Engineering, 2019, 25(1): 3-14.

[15] [15] ANNERFORS C O, PETERSSON S. Nano molding technology on cosmetic aluminum parts in mobile phones［R］. Sweden: School of Mechanical Engineering Lund University, 2007.

[16] [16] ZHANG CH Y, LI ZH Y, WANG Y M, et al.. Mechanical-electrochemical micro-etching under laser shock effect［J］. Opt. Precision Eng., 2012, 20(6): 1310-1315. (in Chinese)

[17] [17] VILHENA L M, SEDLAEK M, PODGORNIK B, et al.. Surface texturing by pulsed Nd:YAG laser［J］. Tribology International, 2009, 42(10): 1496-1504.

[18] [18] CHENG B, HAN B, GU L SH, et al.. Nanostructure machining by AFM probe combined with continuous laser［J］. Opt. Precision Eng., 2015, 23(7): 2043-2050. (in Chinese)

[19] [19] ZHANG X M, YUE T M, MAN H C. Enhancement of ceramic-to-metal adhesive bonding by excimer laser surface treatment［J］. Materials Letters, 1997, 30(5-6): 327-332.

[20] [20] BABURAJ E G, STARIKOV D, EVANS J, et al.. Enhancement of adhesive joint strength by laser surface modification［J］. International Journal of Adhesion and Adhesives, 2007, 27(4): 268-276.

[21] [21] ROESNER A, SCHEIK S, OLOWINSKY A, et al.. Laser assisted joining of plastic metal hybrids［J］. Physics Procedia, 2011, 12: 370-377.

[22] [22] XU F, LIU SH Y, FAN H Q, et al.. Enhancement of the adhesion strength at the metal-plastic interface via the structures formed by laser scanning［J］. Optics & Laser Technology, 2019, 111: 635-643.