[1] [1] WANG H J, YANG F, GUO Z M, et al. Progress and challenge of 3D printing titanium and titanium alloys［J］. Rare Metal Materials and Engineering, 2021, 50(2): 709-716.

[2] [2] ZHAN J M, LIANG Z G, HUANG J Y, et al. Study on the single laser cladding process on TC4 titanium alloy surface［J］. Applied Laser, 2020, 40(6): 955-961.

[3] [3] GAO J B, ZHAO X L, YUE J K, et al. Microstructure and mechanical properties of Ti-6Al-4V alloy samples fabricated by selective laser melting［J］. Key Engineering Materials, 2018, 770: 179-186.

[4] [4] DONG D K, CHEN A, LI X F, et al. Effect of surface roughness on fatigue property of TC4 titanium alloy by selective laser melting［J］. Journal of Mechanical Strength, 2020, 42(5): 1094-1098.

[5] [5] GE Y N, WU M P, MAO Y Y, et al. Effect of scanning strategy on forming precision of titanium alloy by selective laser melting［J］. Laser & Optoelectronics Progress, 2018, 55(9): 268-274.

[6] [6] LI Y C, ZHANG Y T, SONG M H, et al. Technology of selective laser melting forming of TC4 alloy and present research status［J］. Heilongjiang Science, 2020, 11(4): 21-23.

[7] [7] SUN J, ZHU X G, LI P, et al. Effect of laser bulk energy density on densification behavior of TC4 titanium alloy by SLM［J］. Materials for Mechanical Engineering, 2020, 44(1): 51-56.

[8] [8] XIAO Z N, LIU T T, LIAO W H, et al. Microstructure and mechanical properties of TC4 titanium alloy formed by selective laser melting after heat treatment［J］. Chinese Journal of Lasers, 2017, 44(9): 0902001.

[9] [9] WANG R H, WANG Z H. Analysis of milling force and surface roughness of TC4 titanium alloy［J］. Tool Engineering, 2021, 55(5): 30-33.

[10] [10] LI H H, WU M P, MA Y Q, et al. Effect of rescanning on microstructure and properties of TC4 titanium alloy prepared by selective laser melting［J］. Heat Treatment of Metals, 2020, 45(8): 91-96.

[11] [11] JING L L, LI Y H, CHENG K W, et al. Application of selective laser melting technology based on titanium alloy in aerospace products［J］. IOP Conference Series: Materials Science and Engineering, 2020, 740(1): 012056.

[12] [12] SING S L, WIRIA F E, YEONG W Y. Selective laser melting of titanium alloy with 50 wt% tantalum: Effect of laser process parameters on part quality［J］. International Journal of Refractory Metals and Hard Materials, 2018, 77: 120-127.

[13] [13] AN C, ZHANG Y M, ZHANG J S. The research of influence of selective laser melting process parameters on density and surface roughness of co-Cr alloy molding parts［J］. Applied Laser, 2018, 38(3): 328-333.

[14] [14] HUANG W D, ZHANG W J, LIAN G F, et al. Effect of SLM forming process parameters on surface roughness of 316L stainless steel parts［J］. Applied Laser, 2020, 40(1): 35-41.

[15] [15] LI J, YANG L J, ZHENG H, et al. Influence of laser selection melting times on the surface properties of 316L stainless steel［J］. Surface Technology, 2021, 50(6): 93-100.

[16] [16] YANG L J, ZHENG H, LI J. Study on the influence densification and surface hardness of 316L alloy parts by laser selective melting process parameters［J］. Applied Laser, 2020, 40(1): 7-12.