[1] Shi Z Y, Zhang B, Lin J C et al. Half century of coordinate metrology technology: evolution and trends[J]. Journal of Beijing University of Technology, 37, 648-656(2011).

[2] Zhang G X. The development tendency of coordinate measuring machines[J]. China Mechanical Engineering, 11, 222-226(2000).

[3] Lü X H, Guo Q J, Wang H T et al. Summary of key technologies for error compensation of CNC machine tools[J]. Aeronautical Manufacturing Technology, 65, 104-111, 119(2022).

[4] Tan Y D, Xu X, Zhang S L. Precision measurement and application of laser interference[J]. Chinese Journal of Lasers, 48, 1504001(2021).

[5] Franco P, Jodar J. Theoretical analysis of straightness errors in coordinate measuring machines (CMM) with three linear axes[J]. International Journal of Precision Engineering and Manufacturing, 22, 63-72(2021).

[6] Deng M, Li H M, Xiang S T et al. Geometric errors identification considering rigid-body motion constraint for rotary axis of multi-axis machine tool using a tracking interferometer[J]. International Journal of Machine Tools and Manufacture, 158, 103625(2020).

[7] Andre B, Hintze W. Workshop-suited geometric errors identification of three-axis machine tools using on-machine measurement for long term precision assurance[J]. Precision Engineering, 75, 235-247(2022).

[8] Wang Z, Wang D L, Yu S D et al. A reconfigurable mechanism model for error identification in the double ball bar tests of machine tools[J]. International Journal of Machine Tools and Manufacture, 165, 103737(2021).

[9] Xu K, Li G L, He K et al. Identification of position-dependent geometric errors with non-integer exponents for linear axis using double ball bar[J]. International Journal of Mechanical Sciences, 170, 105326(2020).

[10] Zhao D S, Zhang J, Jia M Q et al. Comparison of two methods for measuring the error of CNC machine tool[J]. Acta Metrologica Sinica, 33-35(2019).

[11] Hemming B, Esala V P, Laukkanen P et al. Interferometric step gauge for CMM verification[J]. Measurement Science and Technology, 29, 074012(2018).

[12] Xiong T, Li S G, Li Q et al. Station planning of laser tracker based on combination measurement[J]. Laser & Optoelectronics Progress, 58, 1712001(2021).

[13] Wendtk K, Franek M, Hartig F. Measuring large 3D structures using four portable tracking laser interferometers[J]. Measurement, 45, 2339-2345(2012).

[14] Camboulives M, Lartigue C, Bourdet P et al. Calibration of a 3D working space by multilateration[J]. Precision Engineering, 44, 163-170(2016).

[15] Zha J, Wang T, Li L H et al. Volumetric error compensation of machine tool using laser tracer and machining verification[J]. The International Journal of Advanced Manufacturing Technology, 108, 2467-2481(2020).

[16] Chen H F, Jiang B, Lin H et al. Calibration method for angular positioning deviation of a high-precision rotary table based on the laser tracer multi-station measurement system[J]. Applied Sciences, 9, 3417(2019).

[17] Chen H F, Zhang S, Wang G Y et al. LASSO based compensation method for geometric errors of large coordinate measuring machine[J]. Measurement, 196, 111157(2022).

[18] Yu C J, Song K, Li J X et al. Optimization of linear thermal deformation compensation coefficient matrix based on Levenberg-Marquardt algorithm[J]. Journal of Zhejiang University (Engineering Science), 50, 1056-1064(2016).

[19] Quan L X, Guo H X, Sheng S W et al. Fault diagnosis of electro hydraulic servo valves based on GA+LM algorithm optimized BP neural networks[J]. China Mechanical Engineering, 29, 505-510(2018).

[20] Zhou A G, Yu J Y, Pu J K et al. Multi-vision homonym location algorithm based on weighted Levenberg-Marquardt[J]. Laser & Optoelectronics Progress, 58, 2415006(2021).