[1] Dittrich D, Standfuss J, Liebscher J et al. Laser beam welding of hard to weld Al alloys for a regional aircraft fuselage design-first results[J]. Physics Procedia, 12, 113-122(2011).

[2] Gullino A, Matteis P, D’Aiuto F. Review of aluminum-to-steel welding technologies for car-body applications[J]. Metals, 9, 315(2019).

[3] Zhu B H, Niu S C, Li Q G et al. Microstructures and properties of nanosecond laser welded Cu/Al/Cu joints under different welding speeds[J]. Chinese Journal of Lasers, 50, 2002102(2023).

[4] Du X, Qi B X, Zhao Z J et al. Process research on fiber laser welding of Ta-10 W refractory alloy[J]. Chinese Journal of Lasers, 49, 1602006(2022).

[5] Madhvacharyula A S, Pavan A V S, Gorthi S et al. In situ detection of welding defects: a review[J]. Welding in the World, 66, 611-628(2022).

[6] Zhang M J, Wu L F, Mao C et al. Experimental research on AZ31B magnesium alloy welded using fiber laser with adjustable ring spot[J]. Chinese Journal of Lasers, 49, 2202002(2022).

[7] Rasch M, Roider C, Kohl S et al. Shaped laser beam profiles for heat conduction welding of aluminium-copper alloys[J]. Optics and Lasers in Engineering, 115, 179-189(2019).

[8] Volpp J, Vollertsen F. Impact of multi-focus beam shaping on the process stability[J]. Optics & Laser Technology, 112, 278-283(2019).

[9] Milberg J, Trautmann A. Defect-free joining of zinc-coated steels by bifocal hybrid laser welding[J]. Production Engineering, 3, 9-15(2009).

[10] Chen S H, Zhai Z L, Huang J H et al. Interface microstructure and fracture behavior of single/dual-beam laser welded steel-Al dissimilar joint produced with copper interlayer[J]. The International Journal of Advanced Manufacturing Technology, 82, 631-643(2016).

[11] Harooni M, Carlson B, Kovacevic R. Dual-beam laser welding of AZ31B magnesium alloy in zero-gap lap joint configuration[J]. Optics & Laser Technology, 56, 247-255(2014).

[12] Chen H W. Study on non-penetrating welding technology of dual beam laser for 304 stainless steel[D](2017).

[13] Iwase T, Sakamoto H, Shibata K et al. Dual-focus technique for high-power Nd∶YAG laser welding of aluminum alloys[J]. Proceedings of SPIE, 3888, 348-358(2000).

[14] Xie J. Dual beam laser welding[J]. Welding Journal, 81, 223S-230S(2002).

[15] Li L Q, Chen Y B, Tao W. Research on dual-beam welding characteristics of aluminum alloy[J]. Chinese Journal of Lasers, 35, 1783-1788(2008).

[16] Li L Q, Xia H B, Ma G L et al. Flow dynamics during single- and dual-spot laser welding with one common keyhole of 321 stainless steel[J]. Journal of Materials Processing Technology, 255, 841-852(2018).

[17] Pang S Y, Chen W D, Zhou J X et al. Self-consistent modeling of keyhole and weld pool dynamics in tandem dual beam laser welding of aluminum alloy[J]. Journal of Materials Processing Technology, 217, 131-143(2015).

[18] Li S, Chen G, Zhang M et al. Dynamic keyhole profile during high-power deep-penetration laser welding[J]. Journal of Materials Processing Technology, 214, 565-570(2014).

[19] Xu J J, Rong Y M, Huang Y et al. Keyhole-induced porosity formation during laser welding[J]. Journal of Materials Processing Technology, 252, 720-727(2018).

[20] Cheng Y Y, Jin X Z, Li S C et al. Fresnel absorption and inverse bremsstrahlung absorption in an actual 3D keyhole during deep penetration CO2 laser welding of aluminum 6016[J]. Optics & Laser Technology, 44, 1426-1436(2012).

[21] Golubev V S. Laser welding and cutting: recent insights into fluid-dynamics mechanisms[J]. Proceedings of SPIE, 5121, 1-15(2003).

[22] Szymański Z, Kurzyna J. Spectroscopic measurements of laser induced plasma during welding with CO2 laser[J]. Journal of Applied Physics, 76, 7750-7756(1994).